These versions are test builds. Use them at your own risk.

A new final was released on June 14. If you were referred to this thread prior to June 14, please get the final from the main thread.

HFSLIP home page

*********************************************************
I hope tomcat76 doesn't mind me [tommyp] editting this post to add in a beta test build. See attachment for beta testing in preparation for the next final. Bugfixes:
a FDV fileset fix to run an additional INF command
b ActiveX killbit fix



*********************************************************

You can help by checking if the binary removal files (2000SP4.EXT, XPSP1.EXT and XPSP2.EXT) cover everything. Download dumpdupes.cmd and place it in the main HFSLIP folder (alongside the normal HFSLIP executable). Run this tool AFTER you ran HFSLIP (it namely requires a SOURCE and a SOURCESS folder to compare). If there are any duplicate binaries that can be removed, a file called EXCLUDE.TXT will be created. Let me know if it contains additional files to those that already exist in the current removal files. This program can be used to check Windows 2000, XP and 2003 sources.
Dumpdupes.cmd has one limitation: it only checks for duplicates in the current sources. This tool would have to be run again whenever new hotfixes arrive in order to ensure the list is up to date. I'll probably make another tool that outputs a full list of any driver binary that isn't supposed to be loose in I386 once I evaluated the pros and cons of both.



This post has been edited by tommyp: Nov 12 2008, 06:13 PM

I used HFSLIP_60312-t1.CMD with WIN 2000 & XP

WINDOWS 2000:

1. KB 842773 (WinHTTP 5.1) doesn't integrate.

2. Failure of registration of chosen files: *cpl again (2000 & XP)
-> directx.cpl be active


WINDOWS XP:

3. KB 892130 Windows Genuine Advantage Validation Tool doesn't integrate.

4. KB 887472 (Windows Messenger) doesn't integrate.


----

5. How to download and integrate KB905474 ?

In general: when did these problems start? Which HFSLIP release is working fine?

For the *.cpl files...
60312-t1 doesn't touch *.cpl files anymore (as opposed to the last few builds) so the problem lies elsewhere. Do these come from application addons?

FYI, The .cpl issues that I mentioned in the main thread were not HFSLIP's fault.

@TAiN:
OK... Thanks. The new solution is still better, though. I'm letting HFSLIP compress *.cpl files again just like before. Only the *.cpi files are left uncompressed. There's no point in not compressing either.

@dziubek:
Just for testers... can you remove winhttp.dll from your HFEXPERT folder?

YES, no problem . I removed this file and I must create new sourcess, yes?

Also, can you rename LegitCheckControl.dll in your HFEXPERT folder to WGA1.DLL?
You do know there's a new version of LCC, right?

Yes... HFSLIP needs to be run again.

This post has been edited by Tomcat76: Mar 12 2006, 10:37 PM

Yes I know, but I for safety downloaded this file again and renamed LegitCheckControl.dll in HFEXPERT folder.

* KB 892130 Windows Genuine Advantage Validation Tool doesn't integrate.

* KB 887472 (Windows Messenger) doesn't integrate.

* Failure of registration of chosen files: *cpl again

I used this files from addon pack:Control Panel Extensions
http://ryanvm.net/forum/viewtopic.php?t=511






dziubek

You can rename WGA1.DLL back to LegitCheckControl.dll. It was just for testers.

I believe that the *.cpl issue is actually a *.cpi issue. You should remove the ending "x" from the name of *.cpi files that have one because HFSLIP doesn't rename them. For example, "CDImagex.cpi" should be renamed to "CDImage.cpi".

As far as LegitCheckControl is concerned... If you remove the version that's in HFEXPERT, are you still being asked to download "Windows Genuine Advantage Tool"?

I'm looking into the Windows Messenger hotfix now.

Windows Messenger...

It would help if you actually included the hotfix in the HF folder. Please note the difference:

WindowsXP-KB887472-x86-plk.exe (Windows Messenger hotfix)
and
WindowsXP-KB887742-x86-PLK.exe (Stop error)

First test:
1. I used HFSLIP_60312.XX CMD (ERROR_REPORT_1.zip)

a. I added WindowsXP-KB887472-x86-plk.exe to HF folder and this hotfix was integrated.
This was my oversight, sorry :>

b. I deleted wga1.dll (LegitCheckControl.dll) in HFEXPERT,
but I still being asked to download "Windows Genuine Advantage Tool"
-->KB 892130 Windows Genuine Advantage Validation Tool doesn't integrate.
(http://download.microsoft.com/download/4/f/9/4f9730c0-2061-4028-bca9-3d6e652a5cc8/LegitCheckControl.cab)

c. I removed the ending "x" from the name of *.cpi files, but failure of registration of chosen files: *cpl it exists again.



Second test:

2. I used HFSLIP_60313a.CMD (ERROR_REPORT_2.zip)


a. KB 892130 Windows Genuine Advantage Validation Tool doesn't integrate.

b. I deleted all files from CODECS folder and i added this addons to HFAAO folder (instead of hand unpacking files and placing CODECS folder)

->>only one didn't register: CDImageGUI Control Panel Extension

Microsoft VirtualCD CPL
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

Windows Update List CPL
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

User Accounts2 CPL Enabler
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

TweakUI Control Panel Extension
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

Services and Devices CPL (Pserv)
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

ResHack Control Panel Extension
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

Registry Tweaker CPL
http://ryanvm.net/forum/viewtopic.php?t=15...=asc&highlight=

Bootvis Control Panel Extension
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

Hoster CPL
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

DirectX 9.0c CPL
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

MemTest CPL
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

CDImageGUI Control Panel Extension
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

RVM Integrator 1.1 CPL
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=

Windows XP PowerPacker 1.0rc7.1 CPL
http://www.ryanvm.net/forum/viewtopic.php?...=asc&highlight=







-------
How to integrate KB905474. I found nowhere direct link to him. I in attachment send content of this hotfix downloaded from WU to: C:\WINDOWS\SoftwareDistribution\Download

KB905474.7z

dziubek

This post has been edited by dziubek: Mar 13 2006, 08:12 PM

LegitCheckControl.dll...
For testing, open a Run box (in a freshly installed system), type the following and press Enter:



*.CPL files...
I see some of those need to be renamed. In that case, you should use the HFAAO method.

CDImageGUI...
I'll need to check that out. I don't see anything special about that package.

This post has been edited by Tomcat76: Mar 13 2006, 08:51 PM

Testing HFSLIP_60313a

1. SVCPACK\HFSLIP.CMD seems to be in good order
2. On setup, there was a copy problem with HFSLP255.INF - It's not in the I386 folder

I have seen a few times lately that CPL files aren't registering. In my dealings with CPL files, if you place one in the sys32 folder, you see a control panel icon in the control panel. There wasn't any commands or anything to register it, it was just there. Am I missing something? Is there some sort of new CPL file looming out there?

An alternate way to see if the wga is slipstreamed is to open up regedit and search for LegitCheckControl.dll. Once you register this dll, it writes itself all over the registry.

This post has been edited by tommyp: Mar 14 2006, 03:45 AM

usualy any .cpl file is diplayed in control panel - if not hidden by a special treatment (tweakui has a chapter to reveal them)

but you can also register an .exe file into control panel - silentdrive does so:

(the 115K .exe inside this cab copies a 40K .exe into system32 an shows it in control panel)

greetings

and dziubek: your missing file-problem: the .cpl and the .cpi MUST have the same name!!!

This post has been edited by murvun: Mar 14 2006, 05:07 AM

The cab file posted by murvun is an exe that creates something display an icon in control panel. dziubek is having this prob...
"c. I removed the ending "x" from the name of *.cpi files, but failure of registration of chosen files: *cpl it exists again."
Isn't a CPL file just a CPL file and it only gets displayed in the control panel? I never seen the need for a CPL file get registered. As a "for example" I have a directx9 CPL file in my 2k hfexpert\win\system32 folder. It gets copied over to system32, and after installation if I double click the directx9 CPL file, the directx9 properties appear. I don't register it. I think I'm missing something with this issue. [sorry if I'm hijacking this thread]