This is part of Binifix4.cmd, which is launched at GUIRunOnce, you may include your stuff inside or use the code.
Mind you- when multiple windows sources are on the USB stick, tagfile is different- WIN_00.BT, WIN_01.BT etc. etc. You may use your own tag file.



menu.lst will be fixed in next version, by the end of september when I will have spare time- have a look at the posts at bottom of first page and firsts on second page of this thread- they are all about menu.lst and the default entry.

edit: similar part for finding USB drive you will find in ren_fold.cmd, launched from SetupParams in winnt.sif.

edit2: It would be good idea ren_fold.cmd or binifix4.cmd to set the found drive letter in

HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup SourcePath

Need to investigate when it is created, and will include it in the next version, thanks.

This post has been edited by ilko_t: Aug 7 2008, 02:53 AM

I have been following this project and decided to give it a go, but I have run into a problem.

The install to Flash Drive seems to work fine I have opted to have XP, BartPE, and Vista. XP boots and starts to install but blue screens on "Starting Windows" (text section) the error is



Vista works fine I have yet to try BartPE

The PC is a Dell 755 with sata hard drive

And you have integrated the specific sata drivers, right?

Can you try again setting in BIOS "ATA or IDE" compatibility mode?

jaclaz

That's a well known troublemaker.

Use a edited ntdetect.com http://www.msfn.org/board/-t112630.html&am...st&p=738009

Ok I have done that and it works but install is really slow Usb 2.0 flash drive is there anything known to speed things up ?

Maybe that Dell has USB 2.0 ports but only boots at 1.1 speed.

For the moment no solution, something is in the works, but nothing yet functional.

jaclaz

Which part goes slow? Loading drivers during Text mode only or loading drivers AND copying files at end of Text mode?
If it's first- your BIOS does boot in USB 1.1 speed, after loading drivers it should be USB 2.0.
If second- try formatting stick in NTFS/FAT32 or FAT16 if it's 2GB or less and BIOS supports boot from such, matter of experimenting.

I have been playing around and I tried formating in NTFS the results are amazing I have gone from nearly 2 hours for the 1st section of the install to about 4 mins.

All is not well though on part3 of the install I get an error



So I am going to try and find out why I get this message, but if anyone knows why please tell me

So I was able to get BartPE to load up but as far as any of many linux dist.. nada... I get the following error. I'm running a 4GB formatted FAT32.


-----------------------------------------------------------------
Booting 'Start SysLinux bootsector from partition 0'

Filesystem type is fat, partition type 0cx

SYSLINUX 3.64 2008-04-10 EBIOS Copyright © 1994-2008 H. Peter Anvin
could not find kernal image: linux
boot:
------------------------------------------------------------------

Well I tried with a 2GB Fash drive FAT16 and same error... Please help!

I've gone through the thread, and read the FAQ, but please forgive me if I've missed the answer.

I got directed here after being dumped with a Tablet PC pre-installed with XP Pro (no pen/touch support, great huh?) and no Floppy/CD/DVD etc.
I downloaded the GUI, ran it to format the USB key and copy the XP Tablet files and plugged it into the Tablet ...
I can boot into USB fine, I can start Setup fine - but I get:

Q8: I got "Insert WinXP CD" Error, why?
A8: The correct value in WINNT.SIF is MsDosInitiated="1". This is done automatically by the script. You must have changed WINNT.SIF after prepared USB disk.

Well, I don't have a WINNT.SIF (apart from the Sample one) and I can't find a reference to MsDosInitiated in any of my files on the USB key.

I know I'm probably doing something fundamentally stupid ... but if anyone could tell me what it is, I'd be grateful!

Sorry about the delayed responses, I am still on holiday and have a little break from computers

Good, NTFS really helps sometimes. For HAL.DLL error please check the FAQs.



Umm, you need you ammend your syslinux.cfg for the particular distro and check kernel parameters for USB boot. The program just adds syslinux bootsector, copy the contents to USB and loads syslinux, and from the message you have posted it seems that syslinux is loaded indeed.



It happens if your source is on CD, will be fixed very soon. Please use the file in post #36 it's fixed there, just extract it to WinSetupFromUSB folder and launch it instead of the other EXE.
When I get back from holiday will put all changes in new beta version.
Thanks for the feedbacks.

ilko

Program updated to 0.1 Beta, please refer to first post for list of changes and download links.

Me runes Win98, but me thinks this is a goood piece of software and deserves moar feedback.
Thanks to people, who put this together!
Greets!

I'm getting this error all the time.
I've read the FAQ's and can't seem to understand what I'm doing wrong?
I'm trying to install to a notebook that has no problem with formating and reading the first set of files,
but when the computer restarts it just gives the error above.
Now when I'm trying to install with another USB-stick with other settings it doesn't allow me to format anymore. It keeps giving me this hal.dll error.
What can be wrong?

Thx!

jonsa79- what partition are you installing windows to? First, second...?
What folder name you gave for Windows, is it the default Windows?
Doe the laptop have a hidden first partition?

Please post your BOOT.INI on the root of the USB stick too. There must be a mismatch between BOOT.INI parameters and the location you install Windows to.


tonich- thanks

$OEM$
Presetup.cmd

Would you please add support to copy the $Docs and $Progs folders inside the $OEM$ folder in the Presetup.cmd

Thanks