MSFN Forum: AutoIT Script Collection - Contributions Only - MSFN Forum

WinTasks 5 Pro (Don't use spaces in your code--put numbers together)





 WinTasks_5_Pro.au3 (1.98K)
Number of downloads: 213

Here's my battlefield 2 script (and yes the cd-key is seperated for a reason)

Sorry for not fixing this earlier its been a busy few months. to get past the registration part put this in the support folder

http://matt.devertex.com/EReg.exe

use this to figure out the file structure (note it does not have to be on the root of the partition) EA support page note it is for the sims 2 but use the same file structure (disk1, disk2 etc) for the install if you don't want to switch disks


it is a blank program that just opens and closes so that it thinks you went thru the registration or chose not to
this does not get around needing a CD-Key, it only stops the install from asking for you to register online

if you don't trust me you can compile it yourself

// all it is this (C++)
int main( void );
{
	 return 0;
}

This post has been edited by ender341: 12 March 2006 - 05:41 PM

Time Adjuster 2.9 - Very Good Subtitle Tool
http://www.ireksoftware.com/ta/

Cursor XP 1.31 Dutch

**** NFO Viewer v2.10.0031.RC3

Working tested with VM and Real World

VobSub_2.23

DivX Bundle 6.4

Homepage

Comments:
Choose components and shortcuts within the script to keep or remove. Toolbars and downloads processes are prevented from any operation or installation tactics. An opening internet browser will be closed amongst other needed actions to make installation without hassles.

Download Install Script:
 _DivXInstaller_v6.4.au3 (10.98K)
Number of downloads: 219

This post has been edited by MHz: 06 November 2006 - 06:59 AM

Hypersnap 6

Homepage
Updated script from Nologic
Open the setup file with winrar and add your HprSnap6.hs6lic to make installation with registration

File: Unreal Tournament G.O.T.Y. Edition (Should also work with original UT)

Version: 1.0

This is an automated installer for UT to install the game from the Hard Drive without user interaction, defaulting the installation to D:\UnrealTournament. Copy the contents of the CD to the (C,D,E):\UTInstall directory or change the If..Then..Else statement at the top of the script to a single Run command pointing to the setup.exe file on your CD drive. If you would like to change the installation directory just change the variable located at the top line of the script to whatever location you want. This was tested using the Unreal Tournament GOTY Edition CD version 432 and should work with any version of UT however this is the only version of UT that I have so YMMV.

Note: This is for the original versions of UT ONLY and likely will not work with UT2k3,4, or any other version of Unreal. You are free to try, however, but those were not what I was intending this for.

This post has been edited by maciel310: 07 January 2006 - 07:46 PM

This scripts silently installs Corel Paint Shop Pro X. You just have to type the serial number (as 3 strings), in the script file (it's at the beginning).

Here's an exceptionally simple one for Belarc Advisor. This is a neat system analyzer, found at Belarc Advisor download

The script is painfully simple.

; Script Start - Add your code below here

Run ("C:\Windows\Temp\Belarc\advisor.exe" & " /S")
WinWaitActive ("Belarc License Agreement")
ControlClick ("Belarc License Agreement", "", "I Don't Agree")
WinWaitActive ("Belarc License Agreement")
ControlClick ("Belarc License Agreement", "", "I Don't Agree")
FileDelete ("C:\Documents and Settings\All Users\Desktop\Belarc Advisor.lnk")
FileMove ("C:\Documents and Settings\All Users\Start Menu\Programs\Belarc Advisor.lnk", "C:\Documents and Settings\All Users\Start Menu\Programs\Security\Belarc Advisor.lnk")

Note - this depends on having the compiled script (BelarcIT.exe) and the installer (Advisor.exe) in the c:\windows\temp\Belarc directory. Otherwise, adjust to suit.

D.

3dmark 03/05/06


EDIT:
Sorry i forgot to tell that, before you run it you need to aply the reg file.

Windows Registry Editor Version 5.00


;3DMARK REG
[HKEY_LOCAL_MACHINE\SOFTWARE\Futuremark]

[HKEY_LOCAL_MACHINE\SOFTWARE\Futuremark\3DMark03]
"KeyCode"="xxxx-xxxx-xxxx-xxxxx"

[HKEY_LOCAL_MACHINE\SOFTWARE\Futuremark\3DMark03\3.6.0]

[HKEY_LOCAL_MACHINE\SOFTWARE\Futuremark\3DMark05]
"KeyCode"="xxxx-xxxx-xxxxx-xxxxx"

[HKEY_LOCAL_MACHINE\SOFTWARE\Futuremark\3DMark06]
"KeyCode"="xxxx-xxxxx-xxxxx-xxxxx-xxxxx"

This post has been edited by muiz: 05 February 2006 - 11:06 AM

Updated my BricsCAD script.

Now supports both the Classic and Pro version, tried to make it compatible with all (future) versions of BricsCAD.

 BricsCad.au3 (3.19K)
Number of downloads: 172

Alcohol 120% 1.9.6.4629

Homepage

Comments:
The "Get Registration Script" will retrieve the registration from the registry and add it into your clipboard, so you can easily paste into your "Install Script".

This script uses an include file, "IE.au3" which will be included into the main script when compiled. "IE.au3" is included with AutoIt 3.2.0.1 and above so you should already have it. The use of COM code is suitable to add to this version of installer for it's use of embedded Html.

For a seamless (no roboot...) install at 1st logon, then this install script requires you to install the SPTD Scsi driver as posted here at a previous time like T-12 of Windows Setup (Thanks to Shark for distributing the unattended version). The install script below was never intended to handle the SPTD Scsi driver installation also.

The Starwind service is not the scsi driver, but only is suitable for Network use so is not needed for home users without a network setup.

Download: Install Script:
 _Alcohol120_1.9.6.4629.au3 (7.16K)
Number of downloads: 523

Download: Get Registration Script:
 Alcohol_120_Registration.au3 (923bytes)
Number of downloads: 431

This post has been edited by MHz: 06 November 2006 - 11:30 PM

Nero 7.x

Description:
Install Nero 7.x (any language) completly silent, with custom components and configuration.
Run from within same directory as nero setup executable.

Features:

• Completly removes and disables Nero Scout
  
• Removes Nero startup process(es)
  
• Disables 'prompt to save unsaved project/compilation when exiting'
  
• Enables 'DVD overburning'
  
• Enables 'Show real recorder write speed while burning'
  
• Enables 'Short Lead-Out'
  
• Prevents the CD/DVD from ejecting after burning is complete
  
• Permanently moves annoying UserImages.bmp to Temp dir
  
• Modifies 'Nero 7 Demo' title in add/remove programs according to licensekey

Many thanks to MHz for his help developing this script.

This post has been edited by BoardBabe: 18 March 2006 - 11:09 AM

CCleaner 1.28

Homepage
Use the SLIM version (no Yahoo Toolbar) download it HERE

Features:
* Shortcut's in All Users Start Menu Folder
* Install into your group (example Tools) in Program Files and in Start Menu Folder
* Delete selected Shortcuts on Desktop and in Start Menu
* Recycle Bin context menu option
* Automatically check for updates option

Script will work for newer versions if the installer will not change.

FIXED one small bug at the end of installation

DONT use ccleaner.exe to install use something else like cc.exe if u dont Finish button is not pressed

This post has been edited by --=ddSHADOW=--: 03 May 2006 - 12:55 PM

CDCheck 3.1.11.0

Homepage
This is free program for personal use but if u have registration code the script will register the program.

Features:
* Shortcut's in All Users Start Menu Folder
* Install into your group (example Tools) in Program Files and in Start Menu Folder
* Delete selected Shortcuts on Desktop and in Start Menu
* Registration

Script will work for newer versions if the installer will not change.

Babylon Pro v5.0

Script version: BabylonV5.0.au3 v0.0.1

Babylon Pro is an online/offline dictionnary running in the system tray and that you can conveniently call using a (selectable) Hotkey or mouse-key combination.
This script allows to install silently:

Usage:
-Go down the scripts and edit the editable sections (3 first ones) to suit your needs. Comprehensive instructions provided.
-Have the script run directly if autoIt is already installed OR compile it and have it run standalone from any point in your install.

Attached zip contains the .au3 script plus an icon ResHacked from a Babylon Package to (optionally) compile the script with.

This post has been edited by Djé: 15 March 2006 - 01:08 AM

I started reading up on 7-Zip today a year or so behind everyone else

I liked it so much I decided to make my life a little easier.

Here's a GUI I created with Autoit. It was quick and dirty so please post any bugs/comments/suggestions. Thanks!

-redfive19

thanks to InViSibLe Gr for the suggestion to post it here.

Crystal player

http://www.crystalplayer.com

Opt("WinWaitDelay",100)
Opt("WinTitleMatchMode",4)
Opt("WinDetectHiddenText",1)
Opt("MouseCoordMode",0)
Run('CrystalPro.exe')
WinWait("License Agreement","Disagree")
If Not WinActive("License Agreement","Disagree") Then WinActivate("License Agreement","Disagree")
WinWaitActive("License Agreement","Disagree")
Send("{TAB}{TAB}{TAB}{ENTER}")
WinWait("About","Official site")
If Not WinActive("About","Official site") Then WinActivate("About","Official site")
WinWaitActive("About","Official site")
Send("{TAB}{TAB}{TAB}{ENTER}")
WinWait("Install...","Add CrystalPlayer ic")
If Not WinActive("Install...","Add CrystalPlayer ic") Then WinActivate("Install...","Add CrystalPlayer ic")
WinWaitActive("Install...","Add CrystalPlayer ic")
Send("{TAB}{TAB}{TAB}{TAB}{SPACE}{TAB}{TAB}{TAB}{SPACE}{TAB}{ENTER}")
WinWait("File types","Uncheck all")
If Not WinActive("File types","Uncheck all") Then WinActivate("File types","Uncheck all")
WinWaitActive("File types","Uncheck all")
Send("{TAB}{TAB}{TAB}{ENTER}{TAB}{TAB}{ENTER}")
WinWait("Message","CrystalPlayer is ins")
If Not WinActive("Message","CrystalPlayer is ins") Then WinActivate("Message","CrystalPlayer is ins")
WinWaitActive("Message","CrystalPlayer is ins")
Send("{ENTER}")
WinWait("Crystal Player Professional 1.97","")
If Not WinActive("Crystal Player Professional 1.97","") Then WinActivate("Crystal Player Professional 1.97","")
WinWaitActive("Crystal Player Professional 1.97","")
Send("{ALTDOWN}{F4}")