poolcarpet Posted January 3, 2009 Share Posted January 3, 2009 I've emailed them, but no response yet. Once I get some info, I will share with everyone.I also PM'd fatlip.... haven't gotten a response yet. He seems like the only person who knows how to fix this. Does anyone know the cost of the HDD recovery hardware and software from SalvationData?? Link to comment Share on other sites More sharing options...
dskbrk Posted January 3, 2009 Share Posted January 3, 2009 As other members, i got deleted my posts from the closed thread on seagate forum. Now i'm here too.while hoping to find a solution, i'ld suggest to save the closed thread on delicious and other bookmark service, tagging it with something like shame on seagate. Link to comment Share on other sites More sharing options...
JatinBeniwal Posted January 3, 2009 Share Posted January 3, 2009 i have the same problem but got fixed after installing windows vista. Other thing if it works fine for 2.5 month then it head may be damaged by either shock or similar region. try to heard some sound in hard disk. is it very noisy. Link to comment Share on other sites More sharing options...
poolcarpet Posted January 3, 2009 Share Posted January 3, 2009 Hi all and especially Fatlip if you are here,I would really like to know how to build the serial -> SATA interface to connect to the hard disk. I was searching more and more about this and I have found a document which lists down the exact steps/commands to free up the BSY mode. You DO NEED TO DISCONNECT the PCB from HDA before doing it, just as I suspected back in the Seagate forum.However, I'm not sure if the steps alone will totally free it up or it will leave it detectable by BIOS but with 0 size (the second problem faced by others). If it's the 0 size, then it's something else that we need to search for further, but at least we can unset the BSY mode.But I need to know how to connect to the SATA interface.... Link to comment Share on other sites More sharing options...
labraticmp3 Posted January 3, 2009 Share Posted January 3, 2009 (edited) Hi all and especially Fatlip if you are here,I would really like to know how to build the serial -> SATA interface to connect to the hard disk. I was searching more and more about this and I have found a document which lists down the exact steps/commands to free up the BSY mode. You DO NEED TO DISCONNECT the PCB from HDA before doing it, just as I suspected back in the Seagate forum.However, I'm not sure if the steps alone will totally free it up or it will leave it detectable by BIOS but with 0 size (the second problem faced by others). If it's the 0 size, then it's something else that we need to search for further, but at least we can unset the BSY mode.But I need to know how to connect to the SATA interface....If you live near a Frys Electronics you can buy a interface board from them the info needed is in this link Frys Interface BoardI have found two other interface circuits Circut 1 Circut 2I have connected to my drive with the Frys interface board and was able to see the error code. I was not however able to enter command mode so I was hoping to hear from Fatlip to make sure I was connecting things right.One other thing the com port setting seem to be 38400,n,8,1 Edited January 3, 2009 by labraticmp3 Link to comment Share on other sites More sharing options...
fatlip Posted January 3, 2009 Share Posted January 3, 2009 (edited) Don't worry all, I am still around.Working on some pics/instructions today.I just PM'ed everyone that messaged me on the Seagate site and told them to come here. G Edited January 3, 2009 by fatlip Link to comment Share on other sites More sharing options...
dskbrk Posted January 3, 2009 Share Posted January 3, 2009 Hi all,please check also the barracuda 7200.11 spec docs from seagate.Take a look at page 32, it says:"This command controls the implementation of various features that the drive supports. When the drive receivesthis command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt."It talks about the hd "supported ATA commands". No idea of what ata commands are and if this can help. I just hope so. Link to comment Share on other sites More sharing options...
timha Posted January 3, 2009 Share Posted January 3, 2009 Hi all and especially Fatlip if you are here,I would really like to know how to build the serial -> SATA interface to connect to the hard disk. I was searching more and more about this and I have found a document which lists down the exact steps/commands to free up the BSY mode. You DO NEED TO DISCONNECT the PCB from HDA before doing it, just as I suspected back in the Seagate forum.However, I'm not sure if the steps alone will totally free it up or it will leave it detectable by BIOS but with 0 size (the second problem faced by others). If it's the 0 size, then it's something else that we need to search for further, but at least we can unset the BSY mode.But I need to know how to connect to the SATA interface....hey poolcarpet,do you have a link to the document you mentioned ? i too am interested in building the interface and unlocking the bsy.thanks Link to comment Share on other sites More sharing options...
Styleman Posted January 3, 2009 Share Posted January 3, 2009 (edited) First off - @ fatlip, thanks for the invite to this thread - I can't wait to hear an update from you when you are ready to present your findings. I think that things will move quickly after this point, although hopefully not too many drives will be lost due to "trial and error" Everyone please remember once fatlip posts his information - the serial controlled terminal window into your HDD is all powerful, and its very easy to mess up any chance of recovering your drive.Secondly @ poolcarpet, I second the motion. I would also like to see this document you refer to. More importantly, has it been verified or tested? Edited January 3, 2009 by Styleman Link to comment Share on other sites More sharing options...
cengizhan Posted January 3, 2009 Share Posted January 3, 2009 There are lots of people waiting for a solution. I hope we have an easy solution for this trouble. And i am very sorry that i have switched from wd to seagate. This shouldnt be happenned. Link to comment Share on other sites More sharing options...
Styleman Posted January 3, 2009 Share Posted January 3, 2009 I upgraded from my stable 7200.10 Seagate drives to these timebombs.Thats what I get for being greedy with storage I guess.There are lots of people waiting for a solution. I hope we have an easy solution for this trouble. And i am very sorry that i have switched from wd to seagate. This shouldnt be happenned. Link to comment Share on other sites More sharing options...
seahateHDD Posted January 4, 2009 Share Posted January 4, 2009 I got pm on seagate forum from fatlip saying topic is moving here so he knows where it's moved to, guess he is busy and will appear and post sometime I don't want to fiddle too much with drive yet as getting replaced on monday and don't know where that will leave me warranty wise. A note on data backup seems very relevant. I am sure many know this so sorry for boring you but in case some don't I'm mention it. As for data I triple medium backup (and for years I thought this over cautious hehehehe). Word of advice though, don't trust CDR/DVDR as archive quality method of backup, datacan deteriorate after a year or two. Some brands are worse than others (I've only had probs with certain cdrs personally) but all homemade CDR/DVDR suffer from this due to method of burning the dark spots onto the media (like optical version of magnetic spot binary storage on floppy/cassette tape/ zip/HDD etc) not being as good as commercial process. The domestic method is a laser modified pigment (commercial is usually a physical process to create the dark spots, or it was last time I checked) and contrary to popular belief even expensive/quality brands are not immune (it's the nature of the technology not the quality of it). That said cheap 'n' nasty brands can lose data intergrity after just a few months. With this in mind check integrity of your cdr/dvdr every 6 months or so and make fresh copy at appropriate intervals, of the most important stuff at least. This isn't a guarantee that all will develop read errors in couple of years, it's just more likely to happen after this time, maybe you'll get lucky and they will still be working in decades. Even in a significantly none fluctuating ambient temp, low humidity, dark environment it can happen but light can speed up pigment breakdown.For me personally I'd rather be safe understanding that it's possible this can happen and renew disk backups (mainly raw format photos and 3d models and publicity files so it's a lot of data, photos in particular I cannot replace) since it only cost a few £ a year to do this. I also use an old pata WD120Gb drive that I plugin when needed to backup important stuff. I store this in a cupboard in constant suitable environ along with flash cards.I think the most important point is previous poster mentioned "off site" storage, this is very important. You can have a guaranteed 500year life archive with quadruple backups but what good is that when the office or house burns down or floods? Like the saying goes don't put all your eggs in one basket. The Anna Amalia Weimar library springs to mind. Link to comment Share on other sites More sharing options...
Zenskas Posted January 4, 2009 Author Share Posted January 4, 2009 (edited) Wow I have dragged a lot of new members over here to MSFN hopefully you guys will stay here even after the HDD problem as it's a great forum with quite a few smart people. So the BSY problem can be fixed then? But it does not fix the problem still? The data recovery companies are charging enough money for their services that you could go out and buy ten drives! (does that sentence make sense??? )Anyway now we can try to find a solution.EDIT: Man I wish that AlanM mod on seagate would shut up... this is what he posted in a thread on the seagate forum:Just for the record, no relevant technical information has been deleted (*yeah right*) or edited out of that thread(*lol*). We are trying to keep the forum interaction professional (*say what?*) and on-topic(*yeah so go and delete posts that are to do with the problem why don't you*), as stated in our Rules & Guidelines(*it does not say mods can delete links to MSFN in the rules*). There is no need to look at any cached version of it (though feel free to do so(*oh I will*)), as the only major action we've undertaken is to close the thread (*and edit posts for no reason*)for the reasons stated in the final post.(*what, the reason was some BS like "ooh everyone is off-topic"*) Edited January 4, 2009 by RiderZen Link to comment Share on other sites More sharing options...
Fuzzy_3D Posted January 4, 2009 Share Posted January 4, 2009 Now that we're not under the heel of seagate or the corporate data recovery shills, I think it's time someone re-posted this:http://members.shaw.ca/imgref/PC3000_BSY_Fix.aviThis is the PC3000 seagate BSY fix. I found this on some Russian site through google. Just so you can see how trivial this fix actually is, if you have the right hardware. It's encoded in x264, so use VLC if you can't watch it as is. Link to comment Share on other sites More sharing options...
fatlip Posted January 4, 2009 Share Posted January 4, 2009 (edited) Just to be clear here, we don't have a full solution yet. We are 1/2 way I would say. Anyways; here is your start for what you need to connect to the drive.Here is the method that I used, which is the easier method.You need:1 DB9 Serial cable (1 Male/1 Female ends)1 Schmartboard Populated RS-232 AdapterAvailable here: http://shop1.frys.com/product/4717389 (I found mine at a local electronics shop)1 bag of SchmartBoard 920-0005-01 3" JumpersAvailable here: http://shop1.frys.com/product/4717419 (I also found these at my local electronic supply shop)1 Torx T6x2-1/2 screw driver (torx screw size for the PCB board)The tricky part is getting 5V's to the RS-232 module. I accomplished this by rigging it up from a regular power supply adapter molex connector. The red wire is 5Volts and I used the black wire beside the red for a ground to the Schmartboard.As you can see on the RS-232 Module - there are 6 clearly labeled pins in the upper right. We only need 4. (3 technically, but I prefer to use a ground). You need to connect the jumper wires from the Schmartboard:RD--->TX of the driveTD--->RX of the driveAt this point you can power the drive up.This is what it looks like hooked up: Edited January 20, 2009 by fatlip Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now