Bilou_Gateux

Here correct data to use for some values: http://social.msdn.microsoft.com/forums/en-US/21904ab0-9efc-45c7-b49b-c0df0656579c/how-to-change-the-protected-partition-with-ewfram-mode- I can confirm with my SCT install: enabled EWF Disk Mode protects Disk0 Part1 with an overlay size of 8 Gb (8 x 1000 x 1024) decimal 8192000, in hex notation 0x007d0000: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ewf [30 31 1 17] Group = System Bus Extender Start = REG_DWORD 0x00000000 ErrorControl = REG_DWORD 0x00000001 Type = REG_DWORD 0x00000001 FBA [30 31 1 17] PVConfigs = REG_DWORD 0x00000001 OVSize = REG_DWORD 0x007d0000 OVLevel = REG_DWORD 0x00000001 EnableLazyWrite = REG_MULTI_SZ "1" PVPart = REG_MULTI_SZ "1" PVType = REG_MULTI_SZ "0" PVDiskType = REG_MULTI_SZ "0" PVOptimize = REG_MULTI_SZ "0" EwfEnable = REG_MULTI_SZ "1" PVDisk = REG_MULTI_SZ "0"

Microsoft Shared Computer Toolkit for Windows XP, the predecessor to Windows SteadyState was "free". This application [sCT] has been discontinued. From the FAQ http://www.microsoft.com/windowsxp/sharedaccess/faq.mspx During initial installation, EWF [2.0.927] is configured but not enabled (done after reboot when setting Disk Protection) reg dump: HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\ewf [1 31 17 30] ErrorControl = REG_DWORD 0x00000001 Group = System Bus Extender Start = REG_DWORD 0x00000000 Type = REG_DWORD 0x00000001 Tag = REG_DWORD 0x00000010 FBA PVConfigs = REG_DWORD 0x00000001 OVSize = REG_DWORD 0x00000000 OVLevel = REG_DWORD 0x00000001 EnableLazyWrite = REG_MULTI_SZ "1" PVPart = REG_MULTI_SZ "1" PVType = REG_MULTI_SZ "0" PVDiskType = REG_MULTI_SZ "0" PVOptimize = REG_MULTI_SZ "0" EwfEnable = REG_MULTI_SZ "0" PVDisk = REG_MULTI_SZ "0"

for localized versions of Office 2003, integrate office2003-KB943452-FullFile-xxx.exe. contains FORMMAN20ENU.msp patch which solves issue with FM20ENU.DLL

Create LIS (Local Installation Source) to default path %SystemDrive%\MSOCache from Office 2003 slipstreamed with SP3 : SET SOURCE_PATH=<replace_with_source_path_here> %source_path%\setup.exe CDCACHE=2 DELETEABLECACHE=0 PURGE=0 CACHEONLY=1 Office 2003 setup.exe (enhanced version) version 11.0.6176.0 Source is built with: [OfficeIntegrator] Website=http://www.siginetsoftware.com/forum/ OIVersion=1.1.0.20 Method=Direct Integration Service Pack=Service Pack 3 (SP3) KB923618=Office 2003 Service Pack 3 (SP3) Note: for localized versions of Office 2003, office2003-KB943452-FullFile-xxx.exe had to be integrated to avoid issues: http://www.msfn.org/board/topic/104819-office-2003-slipstream-with-sp3-problem/

FP_AX_CAB_INSTALLER.exe -install

Can someone re-upload 7zipsplit.exe? Mediafire: Invalid or deleted file

Microsoft LifeCam 3.x Microsoft-LifeCam-Webcam-Drivers-Only I have found that you can download two small cab packages: http://download.microsoft.com/download/C/B/8/CB8414CD-487E-4E18-8B24-DA8ED722C770/ReleaseCatalogMsi.cab http://download.microsoft.com/download/C/B/8/CB8414CD-487E-4E18-8B24-DA8ED722C770/ReleaseCatalogSetup.cab and find the URL for your language and OS inside the xml files included in cab files. but i haven't found the silent switches (if any) for setupstb.exe

Thanks for the clarification. Is there any practical use for smallest release?

How do i mount this file as virtual disk? With the initial release, i can mount boot.sdi with imdisk: imdisk -a -t vm -f boot.sdi -b 8192 -m C:\Dev\boot Now your archive contains both 300.part file and boot.sdi I tried mounting boot.sdi but can't find NTFS bootrecord which starts with EB5290

Could you upload the small compiled ql.exe to free file host service.

Some tools required from Windows Installer 4.5 SDK ORCA.msi msifiler.exe Eset Antivirus install package eavbe_nt32_enu.msi with No Modules. The size is 6.42Mb. I receive a "Program component upgrade" message for version 3.0.695, what should I do? (3.0) I get this one by using the update program components in Advanced update setup of my previous installed version 3.0.684. The latest virus signature database updates: LOADER0 em000_32_l0.nup PERSEUS0 em001_32_l0.nup PERSEUS1 em001_32_l1.nup PERSEUS2 em001_32_l2.nup ENGINE0 em002_32_l0.nup ENGINE1 em002_32_l1.nup ENGINE2 em002_32_l2.nup ARCHIVES0 em003_32_l0.nup ARCHIVES1 em003_32_l1.nup ARCHIVES2 em003_32_l2.nup ADVHEUR0 em004_32_l0.nup ADVHEUR1 em004_32_l1.nup ADVHEUR2 em004_32_l2.nup CLEANER0 em005_32_l0.nup CLEANER1 em005_32_l1.nup CLEANER2 em005_32_l2.nup ANTISTEALTH0 em006_32_l0.nup ANTISTEALTH1 em006_32_l1.nup ANTISTEALTH2 em006_32_l2.nup Optional but recommended to avoid a small download on first update check SYSTEMSTATUS0 em009_32_l0.nup SELFDEFENSE0 em013_32_l1.nup SELFDEFENSE1 em013_32_l2.nup SELFDEFENSE2 em013_32_l3.nup Install ORCA. Open package eavbe_nt32_enu.msi Delete row Property="NoModules" with Value="1" and save changes. Silent Install script: @echo off&SETLOCAL ENABLEEXTENSIONS ::# create folder md "%AllUsersProfile%\Application Data\ESET\ESET NOD32 Antivirus\Updfiles" ::# create TARGET_DIR md %Temp%\NODInst ::# MSI-based installer package administrative install msiexec /a eavbe_nt32_enu.msi /qb TARGETDIR=%Temp%\NODInst ::# XML configuration file copy /Y cfg.xml %Temp%\NODInst ::# push latest updates copy /Y /V Updfiles\em00?_32_l?.nup %Temp%\NODInst\APPDATADIR\Updfiles ::# populates the File table with sizes based upon source directory msifiler -d %Temp%\NODInst\eavbe_nt32_enu.msi -v -s %Temp%\NODInst\APPDATADIR\Updfiles\ copy /Y /V Updfiles\em009_32_l?.nup "%AllUsersProfile%\Application Data\ESET\ESET NOD32 Antivirus\Updfiles" copy /Y /V Updfiles\em013_32_l?.nup "%AllUsersProfile%\Application Data\ESET\ESET NOD32 Antivirus\Updfiles" ::# Launch install pushd %Temp%\NODInst start /wait callmsi /i eavbe_nt32_enu.msi /qb- REBOOT=ReallySuppress popd rd /S/Q %Temp%\NODInst >NUL 2>&1 Adjust the path of executable and msi package. In my script, all files are stored in same folder and updates are in Updfiles folder Q: Why using the version 3. Eset just released the new 4.2 A: I just need an antivirus installed to make Windows Security Center happy. My VPN connection to the company i'm working for requires Antivirus enabled and up to date + firewall enabled and some other security settings activated. Q: Can i use the full installer (25.9MB) with Modules included A: Yes. In that case, no need to edit package eavbe_nt32_enu.msi with ORCA Using the package with no modules help to save some space - 6.42Mb vs 25.9Mb - where sources are stored.