Here are my .ini files, i just don't know why my specified workgroup doesnt work as it should. It just defaults to WORKGROUP whatever i write in my ini, or make by nlite.

http://rapidshare.com/files/76622029/inifiles.rar.html

thanks

Please attach directly. Do not let us click through that ...

it would appear that file uploading is not possible at this time

rapidshare will just have to do for now.

BTW, i looked at the files quickly and didnt see a problem that stuck out

You might want to look in your i386\WinNT.sif

ok, here's winnt.sif

http://rapidshare.com/files/76681842/WINNT.SIF.html

p.s. i cant upload direct on forum, thats why rapidshare.com

i really dont know why it doesnt enter my workgroup..

Looks allright; are you sure that otherwise your network is working?
-Look at driver, Client for MS Networks, F&P Sharing for MS Networks, TCP/IP,
-Under TCP/IP > Properties > Advanced: is TCP/IP over NetBIOS enabled

You may have removed something that causes this:
-Does this problem occur if you create work with a clean WinXP SP2 with minimal nLite (no removals etc)?

i know that it all looks alright but doesnt work.
netbios is on default settting, my network is working fine btw.

this doesn't occur if i have sp2 with minimal nlite, but in my ini files there is nothing that should of done that

i really dont know what's the problem

It looks like you remove/tweak something that causes this problem

But I also do not see what that might be

I can only suggest to start from minimal nlite, and add groups of settings step by step

That would take a virtual PC, rewriteable CD, or a WinNT32 installation

BTW: did you check Windows\Setuperr.log ?

0 bytes setuperr.log (empty)

i really dont have time to do that, i meant if someone of developers could help and tell me what causes this