MSFN Forums > BDA (Tv tuner support) on Server 2008

shahed26

Mar 25 2008, 10:49 AM

BDA (TV Tuner) support for Server 2008 x86 and x64

3 STEPS ONLY TO GET BDA ON SERVER (TV TUNER FUNCTION)
I compiled a setup file, that will add BDA (TV Tuner) function on Server 2008 x86 and x64, without any hassles.
I tested it on a clean installation several times, no issues at all

Changelog:

QUOTE

07/09/08
-No more devices found error
-Minor bda.inf tweaks
-No need to reboot after installing now
22/06/08
-Fixed a MAJOR bug which prevented the installer from not installing BDA on server
-Updated BDA Installer files with latest DirectX 9 Redist June
03/06/08
-Fixed x64 Directory source file copy error (BDA was not working on x64 systems due to source files not being copied to the right directory)
-Now installer uses x64 version of "regsvr32.exe" to register x64 source files, and x86 version of "regsvr32.exe" to register x86 source files
29/05/08
-Added x64 support
-Made corrections to x86 installer
-Added more filters that were missing from previous installer pack
-Fixed "kxsbar.ax, kstvtune.ax invalid errors

Tested on 7 different x86 and x64 machines, all with different TV Cards, all worked fine

Download Link:

CODE

http://rapidshare.com/files/143426396/bdaforserver.exe.html

Instructions:
Instructions on how to install are inside the setup archive

----------------------------------------------------------------------------------------------------------------------------------------------
IMPORTANT:
This setup pack will work on English version of server, en-US versions only.
If you have any other language version then you have to manually copy ONLY
the "mui" files from vista to source\x86 or x64(for x64 version)\system32 and syswow64 if your on x64 version
Then on server same again, manually copy the "mui" files to system32 and syswow64 as well only
if your on x64 version of server, and then run the setupBDA.exe to install.

-----------------------------------------------------------------------------------------------------------------------------------------------

NOTE:
EVEN THOUGH THESE FILES DONT TOUCH MAIN SYSTEM CRITICAL FILES OR SETTINGS, AM NOT RESPONSIBLE
FOR ANY DATA LOSS OR DAMAGE, USE THIS METHOD AT YOUR OWN RISK.

jonsayers

Mar 26 2008, 11:06 AM

problem is there is no DVB-T Network Provider installed.

You can manually register msdvbnp.ax from a Vista machine but the property tab will be grey'd out (I think the reg key has moved)

QUOTE (shahed26 @ Mar 25 2008, 11:49 AM)

hi
my technotrend tv tuner works like a charm on vista ultimate x86, even though it says on installation of the driver (Not digitally signed by ms), but when i install it on windows server 2008 trial version, it installs the driver, but no tv application work with the tv tuner, it gives error like 'cannot initialize' any solution on how to make it work on server 2008 please. by the way any tv tuner you know that will for sure work on server 2008?
thank you

shahed26

Mar 26 2008, 04:14 PM

QUOTE (jonsayers @ Mar 26 2008, 05:06 PM)

problem is there is no DVB-T Network Provider installed.

You can manually register msdvbnp.ax from a Vista machine but the property tab will be grey'd out (I think the reg key has moved)

QUOTE (shahed26 @ Mar 25 2008, 11:49 AM)

hi
my technotrend tv tuner works like a charm on vista ultimate x86, even though it says on installation of the driver (Not digitally signed by ms), but when i install it on windows server 2008 trial version, it installs the driver, but no tv application work with the tv tuner, it gives error like 'cannot initialize' any solution on how to make it work on server 2008 please. by the way any tv tuner you know that will for sure work on server 2008?
thank you

thanks for your help, i did copy (to sysytem32 under server) and register msdvbnp.ax "regsvr32 /s msdvbnp.ax" from a Vista machine, but still no luck. i installed the latest web release directx 9c, but my dvbviewer tv app cannot find my device although it appears on system device list with no conflict

shahed26

Apr 16 2008, 05:55 AM

has anybody worked around a way to get the bda support on server yet?

terrorix

Apr 21 2008, 11:16 PM

I have an Leadtek DTV2000 H, and have too this problem. I'm trying everything i can, about 10 programs to watch and record TV, but with no success.
I found only information that this not working TV tuner has something to do with windwos(directx) BDA.
Only program which works is DScaler, it shows TV channel picture and also sound, but recording does not record sound, and the quality of video was terrible, even when i set quality XviD/MPG-4 video settings.

Now i'm waiting for some fix, from Leadtek or Microsoft.

shahed26

Apr 22 2008, 05:19 AM

QUOTE (terrorix @ Apr 22 2008, 06:16 AM)

I have an Leadtek DTV2000 H, and have too this problem. I'm trying everything i can, about 10 programs to watch and record TV, but with no success.
I found only information that this not working TV tuner has something to do with windwos(directx) BDA.
Only program which works is DScaler, it shows TV channel picture and also sound, but recording does not record sound, and the quality of video was terrible, even when i set quality XviD/MPG-4 video settings.

Now i'm waiting for some fix, from Leadtek or Microsoft.

thanks for your info. its not your card drivers, its microsoft. they do not have support for it yet. i did try dscalers but does not work with my one (hauppague hrv 4000)
hopefully ms will give us support it soon

terrorix

Apr 22 2008, 07:09 AM

QUOTE (shahed26 @ Apr 22 2008, 12:19 PM)

thanks for your info. its not your card drivers, its microsoft. they do not have support for it yet. i did try dscalers but does not work with my one (hauppague hrv 4000)
hopefully ms will give us support it soon

You wrote: its microsoft. they do not have support for it yet, but support for what exactly, did you know?
I think it may have something to do with directx 10, i will do some research with this, and give here info when have done researching of this problem.

shahed26

Apr 22 2008, 09:53 AM

QUOTE (terrorix @ Apr 22 2008, 02:09 PM)

QUOTE (shahed26 @ Apr 22 2008, 12:19 PM)

thanks for your info. its not your card drivers, its microsoft. they do not have support for it yet. i did try dscalers but does not work with my one (hauppague hrv 4000)
hopefully ms will give us support it soon

You wrote: its microsoft. they do not have support for it yet, but support for what exactly, did you know?
I think it may have something to do with directx 10, i will do some research with this, and give here info when have done researching of this problem.

its not directx 10, its almost impossible to get tv cards working on server 08. they do not support BDA function on server
check this link,
http://www.hauppauge.co.uk/board/showthread.php?t=14850

shahed26

Apr 22 2008, 09:55 AM

btw if you do get tv card working then please share your resource and how you got it working
thanks

terrorix

Apr 22 2008, 10:28 AM

QUOTE (shahed26 @ Apr 22 2008, 05:53 PM)

its not directx 10, its almost impossible to get tv cards working on server 08. they do not support BDA function on server
check this link,
http://www.hauppauge.co.uk/board/showthread.php?t=14850

Yes i read this, but i read somewhere it can be something to do with directx, but now from your link no directx issue is behind that. Then we must wait M$ to add BDA support for server 2008

terrorix

Apr 24 2008, 12:18 AM

I wrote to Leadtek support, but their answer was:

QUOTE

We are sorry for we are not promise it can work with server 2008 platform.
Because any released driver or application software of our download site no test with it.
So we are no suggest you set it work with there.

This is not what im excepting from Leadtek as customer :-(

shahed26

Apr 24 2008, 06:20 AM

to be honest, server is not designed for use as a workstation. its just a bonus for us to have some vista goodiness eg, vista looks etc..
No company design their workstation device (components) drivers for server. as i mentioned its just a bonus for us to have almost all workstation components devices driver work on server except BDA
theres many people out there trying to get BDA working. hopefully someday soon we will have BDA or never

terrorix

Apr 24 2008, 08:06 AM

You're right. But it would be nice if BDA will be supported in server 2008.

shahed26

Apr 28 2008, 06:22 PM

BDA Support is possible now on server 2008. i know someone who got it working fully... will post more info soon
check back soon....

shahed26

Apr 30 2008, 09:20 AM

ok. i got my tv tuner card (hauppauge HVR4000 DVB-S2) working and now i can watch and tune into all my satellite channels including HD Channels ON SERVER 2008.
will be posting on how i got BDA fucntion on server 2008.......

terrorix

May 1 2008, 12:31 AM

QUOTE (shahed26 @ Apr 30 2008, 05:21 PM)

ok. i got my tv tuner card (hauppauge HVR4000 DVB-S2) working and now i can watch and tune into all my satellite channels including HD Channels ON SERVER 2008.
will be posting on how i got BDA fucntion on server 2008.......

Please, write how to get BDA working on server 2008 as soon as possible, please...

shahed26

May 1 2008, 11:46 AM

QUOTE (terrorix @ May 1 2008, 06:31 AM)

QUOTE (shahed26 @ Apr 30 2008, 05:21 PM)

ok. i got my tv tuner card (hauppauge HVR4000 DVB-S2) working and now i can watch and tune into all my satellite channels including HD Channels ON SERVER 2008.
will be posting on how i got BDA fucntion on server 2008.......

Please, write how to get BDA working on server 2008 as soon as possible, please...

give me till fri, as am busy at this moment with other stuffs...

shahed26

May 1 2008, 09:22 PM

guide updated..

zac68

May 1 2008, 10:44 PM

Thanks for the guide. As soon as my daughter finishes watching The Wiggles on the HTPC, I'll boot into Server 2008 and try this.

terrorix

May 2 2008, 12:38 AM

Thanks for detailed instructions, later this day, i will try it with my TV Card Leadtek with its TV software - Winfast PVR 2, and give you info if this setup helps or not.
Thanks again a lot!

shahed26

May 2 2008, 07:08 AM

QUOTE (zac68 @ May 2 2008, 05:44 AM)

Thanks for the guide. As soon as my daughter finishes watching The Wiggles on the HTPC, I'll boot into Server 2008 and try this.

please do report any problems here, so i can work on it
thanks

shahed26

May 2 2008, 07:08 AM

QUOTE (terrorix @ May 2 2008, 07:38 AM)

Thanks for detailed instructions, later this day, i will try it with my TV Card Leadtek with its TV software - Winfast PVR 2, and give you info if this setup helps or not.
Thanks again a lot!

yes please do report any problems here, so i can work on it

zac68

May 2 2008, 07:13 AM

Good news, it worked for me. The only thing that I had to do was extract bdasup.sys from BDAXP.cab and place it into C:\Windows\System32\en-US. The Compro TV viewer does not work, but that's not a problem because I use Webscheduler to record my shows and I convert and watch them later.
Thanks for posting this solution.

Cheers
Zac

shahed26

May 2 2008, 08:01 AM

QUOTE (zac68 @ May 2 2008, 02:13 PM)

Good news, it worked for me. The only thing that I had to do was extract bdasup.sys from BDAXP.cab and place it into C:\Windows\System32\en-US. The Compro TV viewer does not work, but that's not a problem because I use Webscheduler to record my shows and I convert and watch them later.
Thanks for posting this solution.

Cheers
Zac

The "bdasup.sys" file is already on server 2008 located on C:\Windows\System32\drivers. The "BDAXP.CAB" Has the old version of it which will cause problems (maybe). my advice is replace the old bdasup.sys FILE you copied from "BDAXP.CAB" with the original server one

shahed26

May 2 2008, 08:02 AM

EDIT: GUIDE UPDATED NOW EVERY 3RD PARTY TV APPLICATIONS WORKING

shahed26

May 2 2008, 10:27 AM

updated with x64 support

terrorix

May 3 2008, 12:38 AM

Bad news from me, your guide does not help to me

I follow all steps you wrote, all was installed successfully, but my software for watching TV still does not recognize my device.

When i start program, it shows this error:
Click to view attachment

when i go to settings to select device this i have:
Click to view attachment

I dont know what to do now...

martinhy

May 3 2008, 01:16 AM

thank you for your solution. however, when i use DVBViewer, in the setting/options, it seems that the "Digital TV" does not work, it said that there is no device found even i have plugged in the USB TV stick to my computer already. can anyone help me, please!

shahed26

May 3 2008, 06:45 AM

QUOTE (martinhy @ May 3 2008, 08:16 AM)

thank you for your solution. however, when i use DVBViewer, in the setting/options, it seems that the "Digital TV" does not work, it said that there is no device found even i have plugged in the USB TV stick to my computer already. can anyone help me, please!

ok, this is the same problem i had as well. Just run the file bda.inf from "BDAXP.cab" (from latest direcx download)again, and restart (right click on bda.inf and then choose install). if its promting you to install pnp devices that it finds, then just click cancel for all of them if it still does not work, then run bda.inf again, and this time when it finds the pnp devices, just locate and install. when its prompting pnp install make sure you browse to the files extracted from "bdaxp.cab"

Also the guide is sort of confusing, double check everything, and repeat all actions from my guide again if its still not working.

shahed26

May 3 2008, 06:52 AM

QUOTE (terrorix @ May 3 2008, 07:38 AM)

Bad news from me, your guide does not help to me

I follow all steps you wrote, all was installed successfully, but my software for watching TV still does not recognize my device.

When i start program, it shows this error:
Click to view attachment

when i go to settings to select device this i have:
Click to view attachment

I dont know what to do now...

Make sure you have the latest "DIRECTX" installed. also a decent codec pack
run this file from DXSETUP.exe from the latest DX9 Redist download
if it still does not work then do this:
run the file bda.inf from "BDAXP.cab" (from latest direcx download)again, and restart (right click on bda.inf and then choose install). if its promting you to install pnp devices that it finds, then just click cancel for all of them if it still does not work, then run bda.inf again, and this time when it finds the pnp devices, just locate and install. when its prompting pnp install make sure you browse to the files extracted from "bdaxp.cab"

Also the guide is sort of confusing, double check everything, and repeat all actions from my guide again if its still not working.

zac68

May 3 2008, 07:04 AM

Just wanted to let you know that I've been using Server 2008 for the last 24 hours and have recorded several TV Shows with it using Webscheduler and so far it's all good. Thanks again for your Guide.

terrorix

May 3 2008, 07:57 AM

QUOTE (shahed26 @ May 3 2008, 02:52 PM)

Make sure you have the latest "DIRECTX" installed. also a decent codec pack
run this file from DXSETUP.exe from the latest DX9 Redist download
if it still does not work then do this:
run the file bda.inf from "BDAXP.cab" (from latest direcx download)again, and restart (right click on bda.inf and then choose install). if its promting you to install pnp devices that it finds, then just click cancel for all of them if it still does not work, then run bda.inf again, and this time when it finds the pnp devices, just locate and install. when its prompting pnp install make sure you browse to the files extracted from "bdaxp.cab"

Also the guide is sort of confusing, double check everything, and repeat all actions from my guide again if its still not working.

Nothings helps to me, trying this steps or full guide again and with no success.

When i ran register.cmd i have these errors:
Click to view attachment
and
Click to view attachment

I forgot to mention that i have 64 bit windows server 2008. I use source files from 64 bit Vista, this is ok.

I dont know what to do now...

shahed26

May 3 2008, 08:36 AM

QUOTE (terrorix @ May 3 2008, 02:57 PM)

QUOTE (shahed26 @ May 3 2008, 02:52 PM)

Make sure you have the latest "DIRECTX" installed. also a decent codec pack
run this file from DXSETUP.exe from the latest DX9 Redist download
if it still does not work then do this:
run the file bda.inf from "BDAXP.cab" (from latest direcx download)again, and restart (right click on bda.inf and then choose install). if its promting you to install pnp devices that it finds, then just click cancel for all of them if it still does not work, then run bda.inf again, and this time when it finds the pnp devices, just locate and install. when its prompting pnp install make sure you browse to the files extracted from "bdaxp.cab"

Also the guide is sort of confusing, double check everything, and repeat all actions from my guide again if its still not working.

Nothings helps to me, trying this steps or full guide again and with no success.

When i ran register.cmd i have these errors:
Click to view attachment
and
Click to view attachment

I forgot to mention that i have 64 bit windows server 2008. I use source files from 64 bit Vista, this is ok.

I dont know what to do now...

thats were it went all wrong. i updated my guide, read it properly again. the errors wont be there anymore. you need to extract ALL THE FILES from bdaxp.cab and run bda.inf from there. read my guide again coz its updated and you wont get no errors.
btw it should work on x64 as well. (did not try it on x64 yet)

grsc3p0

May 3 2008, 01:53 PM

I would like to say a big thanks to shahed26 for the BDA guide.

My Terratec DT USB XS Diversity Digital Tuner is now working fine in Windows 2008 server!
Dual tuners working OK, everything looks stable and normal, no errors in the OS logs.

Software : TerraTec Home Cinema 5.73.00 beta
Driver : Cinergy DT USB XS Diversity - BDA Driver 3.12.0.0 (for XP and Vista)
Filters : Vista Codec Package 4.6.4
Hardware (PC) : Lenovo T60 Laptop !

Windows 2008 is now FULLY configured to look and behave like Vista. I'm impressed.

shahed26

May 5 2008, 08:47 PM

all working fine after testing.

shahed26

May 6 2008, 04:21 PM

QUOTE (zac68 @ May 3 2008, 02:04 PM)

Just wanted to let you know that I've been using Server 2008 for the last 24 hours and have recorded several TV Shows with it using Webscheduler and so far it's all good. Thanks again for your Guide.

thanks for letting me know. enjoy watching tv on server

shahed26

May 6 2008, 04:22 PM

QUOTE (grsc3p0 @ May 3 2008, 08:53 PM)

I would like to say a big thanks to shahed26 for the BDA guide.

My Terratec DT USB XS Diversity Digital Tuner is now working fine in Windows 2008 server!
Dual tuners working OK, everything looks stable and normal, no errors in the OS logs.

Software : TerraTec Home Cinema 5.73.00 beta
Driver : Cinergy DT USB XS Diversity - BDA Driver 3.12.0.0 (for XP and Vista)
Filters : Vista Codec Package 4.6.4
Hardware (PC) : Lenovo T60 Laptop !

Windows 2008 is now FULLY configured to look and behave like Vista. I'm impressed.

your welcome mate

shahed26

May 6 2008, 04:27 PM

ok guys, please leave feedback of this bda function solution, and please report any issues, so i can improve bda support on server.
any suggestion on how to improve or anything are most welcome
thanks

terrorix

May 8 2008, 09:48 AM

This guide does not help to me

Does anyone gets bda working on 64 bit windows server 2008?

I do this steps:
1. clean install of windows server 2008 x64
2. install all drivers of my motherboard, vga drivers
3. install tv card drivers (WinFast DTV 2000H) x64
4. use your bda install batch

After restart i got some errors as above:
kstvtune.ax
ksxbar.ax

I give up trying to get working BDA on x64 windows server 2008.

shahed26

May 29 2008, 07:45 PM

QUOTE (terrorix @ May 8 2008, 04:48 PM)

This guide does not help to me

Does anyone gets bda working on 64 bit windows server 2008?

I do this steps:
1. clean install of windows server 2008 x64
2. install all drivers of my motherboard, vga drivers
3. install tv card drivers (WinFast DTV 2000H) x64
4. use your bda install batch

After restart i got some errors as above:
kstvtune.ax
ksxbar.ax

I give up trying to get working BDA on x64 windows server 2008.

x64 support added, and made corrections to x86 installer and added a few more missing filters..

valorisa

May 30 2008, 12:05 PM

Hello shahed26,

I have the same error than terrorix with kstvtune.ax and ksxbar.ax by using your manual method. I'm using Win2k8 datacenter X86 on a Dell Latitude C510/C610. What do you advice to me ? Your recently modified automatic method ?

An idea please. My hardware TV tuner : PCTV DVB-T stick solo and PCTV Dual DVB-t Diversity Stick.

Other question : a pack codec like K-Lite codec is really necessary or optional ?

Thanks for your patience.

valorisa

shahed26

May 30 2008, 12:15 PM

QUOTE (valorisa @ May 30 2008, 07:05 PM)

Hello shahed26,

I have the same error than terrorix with kstvtune.ax and ksxbar.ax by using your manual method. I'm using Win2k8 datacenter X86 on a Dell Latitude C510/C610. What do you advice to me ? Your recently modified automatic method ?

An idea please. My hardware TV tuner : PCTV DVB-T stick solo and PCTV Dual DVB-t Diversity Stick.

Other question : a pack codec like K-Lite codec is really necessary or optional ?

Thanks for your patience.

valorisa

try my new recently modified installers. the errors that you and terrorix had with kstvtune.ax and ksxbar.ax are fixed. these errors were caused by a few "mui" files missing that must be present in the source folder.
just try the new installer and it should work this time.
btw make sure your read the instructions before installing found inside the "bdaforserver"

edit: codec pack is optional. but remember server has no mpeg2 codecs or anything, so viewing live tv picture will require you to install one later. anyways thats a optional so its fine without a codec pack

valorisa

May 30 2008, 12:32 PM

Again thanks shahed26. I try this as soon as possible and I will let you know the result.

valorisa

shahed26

Jun 2 2008, 05:32 PM

Updated:

Recent Changes:

QUOTE

03/06/08
-Fixed x64 Directory source file copy error (BDA was not working on x64 systems due to source files not being copied in the right directory)
-Now installer uses x64 version of "regsvr32.exe" to register x64 source files, and x86 version of "regsvr32.exe" to register x86 source files
29/05/08
-Added x64 support
-Made corrections to x86 installer
-Added more filters that were missing from previous installer pack
-Fixed "kxsbar.ax, kstvtune.ax invalid errors

Dr.Sun

Jun 4 2008, 06:39 AM

hello
i'm on win2k8 ent 64bit
downloaded last version.
still getting ksxbar.ax errors
and still can't see tv

please help

shahed26

Jun 4 2008, 08:33 AM

QUOTE (Dr.Sun @ Jun 4 2008, 01:39 PM)

hello
i'm on win2k8 ent 64bit
downloaded last version.
still getting ksxbar.ax errors
and still can't see tv

please help

Did you follow the instructions properly?
what language version of server your using? (it must be en-US)
Did you grab all the files from vista by running "get bda files.bat"?

Dr.Sun

Jun 4 2008, 09:06 AM

QUOTE (shahed26 @ Jun 4 2008, 06:33 PM)

QUOTE (Dr.Sun @ Jun 4 2008, 01:39 PM)

hello
i'm on win2k8 ent 64bit
downloaded last version.
still getting ksxbar.ax errors
and still can't see tv

please help

Did you follow the instructions properly?
what language version of server your using? (it must be en-US)
Did you grab all the files from vista by running "get bda files.bat"?

yes
yes
yes

all went good, but the "regsvr32 ksxbar.ax"
can't do this even manually

can you tell me exactly names of files needed to register ksxbar.ax and kswdmcap.ax? (excluding theirselves of course and ksxbar.ax.mui and kswdmcap.ax.mui)

shahed26

Jun 4 2008, 05:29 PM

QUOTE (Dr.Sun @ Jun 4 2008, 04:06 PM)

QUOTE (shahed26 @ Jun 4 2008, 06:33 PM)

QUOTE (Dr.Sun @ Jun 4 2008, 01:39 PM)

hello
i'm on win2k8 ent 64bit
downloaded last version.
still getting ksxbar.ax errors
and still can't see tv

please help

Did you follow the instructions properly?
what language version of server your using? (it must be en-US)
Did you grab all the files from vista by running "get bda files.bat"?

yes
yes
yes

all went good, but the "regsvr32 ksxbar.ax"
can't do this even manually

can you tell me exactly names of files needed to register ksxbar.ax and kswdmcap.ax? (excluding theirselves of course and ksxbar.ax.mui and kswdmcap.ax.mui)

Hi, after doing a clean install of server 2008 ent x64, i realized that "kstvtune.ax and ksxbar.ax" are not required to register, and it cant be registered as well. The whole point is that them 2 ax files needs to be present in syswow64 and system32 directory, so when you launch any tv applications it uses these 2 files for its purpose. They cant be registered even on vista, i tried registering, but it will not register as the whole point is your tv application to access these 2 files only for your tv app to work.
Just run the "BDA.inf" from bda folder the directX 9 version, and restart to see if your tv card works, if it don't then the only solution i would recommend is do a clean install and run my setup pack.
Hope this helps

Mercury_22

Jun 7 2008, 06:23 AM

Hi!
Just a little tweack for your bat files If you want them to run no matter the location of bdaforserver folder !
-> So NO NEED FOR

QUOTE

and it will extract as "bdaforserver" to your windows
installation drive,thats were the setup MUST be runned from, otherwise it wont work
IMPORTANT:IN ORDER FOR EVERYTHING TO WORK, RUN THE SETUP FROM WERE YOUR WINDOWS
IS INSTALLED (C:) OTHERWISE IT WONT WORK (THATS WERE IT EXTRACTED)

add

QUOTE

cd /d %0\..

after

QUOTE

@echo off

and replace

QUOTE

%systemdrive%\bdaforserver\

with

QUOTE

"../

(also add quotes " at the end of the line)

For example

QUOTE

@echo off

cd /d %0\..

copy %systemroot%\system32\bdaplgin.ax "../source\x64\System32"
copy %systemroot%\system32\kstvtune.ax "../source\x64\System32"
copy %systemroot%\system32\ksxbar.ax "../source\x64\System32"
copy %systemroot%\system32\Mpeg2Data.ax "../source\x64\System32"
copy %systemroot%\system32\mpg2splt.ax "../source\x64\System32"
copy %systemroot%\system32\MSDvbNP.ax "../source\x64\System32"
copy %systemroot%\system32\MSNP.ax "../source\x64\System32"
copy %systemroot%\system32\MSVidCtl.dll "../source\x64\System32"
copy %systemroot%\system32\en-US\MSVidCtl.dll.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\kstvtune.ax.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\kswdmcap.ax.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\ksxbar.ax.mui "../source\x64\System32"
copy %systemroot%\system32\psisdecd.dll "../source\x64\System32"
copy %systemroot%\system32\psisrndr.ax "../source\x64\System32"
copy %systemroot%\system32\VBICodec.ax "../source\x64\System32"
copy %systemroot%\system32\vbisurf.ax "../source\x64\System32"
copy %systemroot%\system32\WSTPager.ax "../source\x64\System32"

copy %systemroot%\SysWOW64\bdaplgin.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\kstvtune.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\ksxbar.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\Mpeg2Data.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\mpg2splt.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\MSDvbNP.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\MSNP.ax "../source\x64\SysWOW64'
copy %systemroot%\SysWOW64\MSVidCtl.dll "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\MSVidCtl.dll.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\kstvtune.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\kswdmcap.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\ksxbar.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\psisdecd.dll "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\psisrndr.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\VBICodec.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\vbisurf.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\WSTPager.ax "../source\x64\SysWOW64"

exit

Good luck with your work !

shahed26

Jun 7 2008, 06:42 AM

QUOTE (Mercury_22 @ Jun 7 2008, 01:23 PM)

Hi!
Just a little tweack for your bat files If you want them to run no matter the location of bdaforserver folder !
-> So NO NEED FOR

QUOTE

and it will extract as "bdaforserver" to your windows
installation drive,thats were the setup MUST be runned from, otherwise it wont work
IMPORTANT:IN ORDER FOR EVERYTHING TO WORK, RUN THE SETUP FROM WERE YOUR WINDOWS
IS INSTALLED (C:) OTHERWISE IT WONT WORK (THATS WERE IT EXTRACTED)

add

QUOTE

cd /d %0\..

after

QUOTE

@echo off

and replace

QUOTE

%systemdrive%\bdaforserver\

with

QUOTE

"../

(also add quotes " at the end of the line)

For example

QUOTE

@echo off

cd /d %0\..

copy %systemroot%\system32\bdaplgin.ax "../source\x64\System32"
copy %systemroot%\system32\kstvtune.ax "../source\x64\System32"
copy %systemroot%\system32\ksxbar.ax "../source\x64\System32"
copy %systemroot%\system32\Mpeg2Data.ax "../source\x64\System32"
copy %systemroot%\system32\mpg2splt.ax "../source\x64\System32"
copy %systemroot%\system32\MSDvbNP.ax "../source\x64\System32"
copy %systemroot%\system32\MSNP.ax "../source\x64\System32"
copy %systemroot%\system32\MSVidCtl.dll "../source\x64\System32"
copy %systemroot%\system32\en-US\MSVidCtl.dll.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\kstvtune.ax.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\kswdmcap.ax.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\ksxbar.ax.mui "../source\x64\System32"
copy %systemroot%\system32\psisdecd.dll "../source\x64\System32"
copy %systemroot%\system32\psisrndr.ax "../source\x64\System32"
copy %systemroot%\system32\VBICodec.ax "../source\x64\System32"
copy %systemroot%\system32\vbisurf.ax "../source\x64\System32"
copy %systemroot%\system32\WSTPager.ax "../source\x64\System32"

copy %systemroot%\SysWOW64\bdaplgin.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\kstvtune.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\ksxbar.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\Mpeg2Data.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\mpg2splt.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\MSDvbNP.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\MSNP.ax "../source\x64\SysWOW64'
copy %systemroot%\SysWOW64\MSVidCtl.dll "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\MSVidCtl.dll.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\kstvtune.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\kswdmcap.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\ksxbar.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\psisdecd.dll "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\psisrndr.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\VBICodec.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\vbisurf.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\WSTPager.ax "../source\x64\SysWOW64"

exit

Good luck with your work !

Mercury_22, Thank you very much for this tweak. I will update my installer pack, and will have a quick test.

Thank you for this tip