Full Version: Chipset Nvidia Ethernet x GSS(Ghost Solution Suite)
I have a notebook with compaq F700 chipset nvidia ethernet, but the ghost solution suite is not the driver.
Can you try writing that again, it is not clear what the problem is. GSS does not include the network driver for your notebook?
some boards with nForce/nVidia NIC are virtual devices controlled by the BIOS. For example, they don't have a hardware id assigned to them at the time of boot!
so there is not a garauntee that it will even work with Ghost. I got it to work but it took me about two months, and we updated all boot keys to DOS 7 to get the drivers to load into memory properly. These NICs still aren't supported in the PE either. You'll have to find the files you need from online somewhere.
I'm not sure how you're going to go about making the boot, but here is what I use in a config.sys.
Of course we use older Ghost than you i bet.
so there is not a garauntee that it will even work with Ghost. I got it to work but it took me about two months, and we updated all boot keys to DOS 7 to get the drivers to load into memory properly. These NICs still aren't supported in the PE either. You'll have to find the files you need from online somewhere.
I'm not sure how you're going to go about making the boot, but here is what I use in a config.sys.
CODE
DEVICE=\net\Nvndis2.dos
DEVICEHIGH=\net\protman.dos /I:\net
DEVICEHIGH=\net\ndis.dos
DEVICE=\net\dis_pkt.dos
DEVICE=emm386.exe /noems
DEVICEHIGH=\net\protman.dos /I:\net
DEVICEHIGH=\net\ndis.dos
DEVICE=\net\dis_pkt.dos
DEVICE=emm386.exe /noems
Of course we use older Ghost than you i bet.
QUOTE (Tripredacus @ Jul 14 2008, 02:21 PM) 
some boards with nForce/nVidia NIC are virtual devices controlled by the BIOS. For example, they don't have a hardware id assigned to them at the time of boot!
so there is not a garauntee that it will even work with Ghost. I got it to work but it took me about two months, and we updated all boot keys to DOS 7 to get the drivers to load into memory properly. These NICs still aren't supported in the PE either. You'll have to find the files you need from online somewhere.
I'm not sure how you're going to go about making the boot, but here is what I use in a config.sys.
Of course we use older Ghost than you i bet.
so there is not a garauntee that it will even work with Ghost. I got it to work but it took me about two months, and we updated all boot keys to DOS 7 to get the drivers to load into memory properly. These NICs still aren't supported in the PE either. You'll have to find the files you need from online somewhere.
I'm not sure how you're going to go about making the boot, but here is what I use in a config.sys.
CODE
DEVICE=\net\Nvndis2.dos
DEVICEHIGH=\net\protman.dos /I:\net
DEVICEHIGH=\net\ndis.dos
DEVICE=\net\dis_pkt.dos
DEVICE=emm386.exe /noems
DEVICEHIGH=\net\protman.dos /I:\net
DEVICEHIGH=\net\ndis.dos
DEVICE=\net\dis_pkt.dos
DEVICE=emm386.exe /noems
Of course we use older Ghost than you i bet.
Problem resolved. |0|
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.