We've been doing the usual update shuffle after receiving our new Dell model lappys and I've run in to a total stonewall getting the RIS install done.
OS: XP SP2
SMS 2005
We originally had the typical issues in text mode, missing driver then incorrect driver, both of which have been addressed by finding different drivers and/or hacking the driver inf files and/or putting them in the correct location in \RemoteInstall\Setup\English\Images\imagename.
But once the install proceeds in to the PE visual environment, it stops shortly after with the "80004005" error, which is typically NIC/mass storage drivers.
I have tried (driverwise):
Dell latest (R190974)
Intel latest (e1y5132.INF (Windows XP 32 bit); $Revision: 1.20 $) including the RIS specific drivers (which seem to be reduced size)
Driver Pack LAN 8053
Roguespears modified drivers
The driver that works in text mode is the Dell latest + this hack (see the post titled "Answer Re: Error "the selected driver is not applicable to any supported platforms" importing DELL NIC driver for Vista32...").
I have also tried size reduction on this INF by reducing the help files and removing foreign languages
Using the osdshell.lab.exe substitute to open a command prompt, I've found I can get an IP via ipconfig and the drive shows up in Diskpart. I can net use to bind to a drive on my PC, and can browse the drive well enough to recover the OSDlogs to my PC. I can ping our MP/DP's FQDN.
But all is to no avail, I cannot get past the 80004005 error.
Attached are the logs (in Trace32 screenies, I hate trying to wade through text blobs ; ). The one thing that stands out is "package path not set". Similar to this problem, except we are using ZTI and our DP is our main (and only) DP, whereas the other example is the package not working at one secondary site.
If anyone has any inspiration, I'd be very greatful for any advice.. =)
OSDShell.log
OSDInstallWizard.log
OSDInstallCD.log
