Hello All,

how would i connect a SATA HDD to my existing system?

I have a dell dimension4600, P4
Do we need to have a separate card installed or it comes with the cable for sata which can connect to my motherboard?

any help wud be appreciated
Thanks and regards
Mutahir

The Dell web site describes the 4600 as having 2 onboard SATA controllers. Thus you will need an appropriate 7-pin SATA cable to plug into the motherboard. Depending on whether your new hard drive has the old 4-pin Molex power connector (should work with your power supply) or the newer 15-pin SATA power connector (you would then need a 4-pin to 15-pin power adapter; unless your power supply has the 15-pin SATA power connector!) would be your other consideration.