Right, I have spent 6 hours, trying desperately to produce a windows CD with the rather nice lookin nlite proggy. I was using the latest version; nlite0998bi.

I have collected all the info needed, fresh copy if XP files to manipulate from disk. All runs fine UNTIL the VERY last step, when nlite atempts to finalise files.

I get the following error msg:

Microsoft Cabinet Maker has encountered a problem and needs to close.

AppName: makecab.exe AppVer: 5.1.2600.2180 ModName: makecab.exe
ModVer: 5.1.2600.2180 Offset: 00004038

I have tried everything humanly possible, even Installing an original version of XP SP2 ! It would still fail.

I can believe I am the first one experienceing this problem, but I could not find anything related in this Forum.

Has anyone got a clue whats going on ?

I apreciate any help/hints

Mike

Comon lads !

I dont believe that I am the very first one experiencing problems with the MS Cabinet Maker...

Get some other makecab.exe and put it into nlite\data

Feature request: Makecab verification. In case makecab is wrong version nLite should warn the user

yeah, a crc check on it would be good.

I, too, am having this problem.
I'm using:
1. nLite v1.0 beta 5
2. Windows XP Pro (VLK) with SP2 integrated

o.k., i replaced makecab into nlite\data like suggested.
Still having the same problem with makecab.exe crashing during Finalizing...
just making iso = no problems.
remove components + make iso = makecab crash
integrating drivers + remove components + make iso = makecab crash
integrate drivers + remove components + UA Setup + make iso = makecab crash
in short, anything addition to make bootable iso = makecab crash
Question: What is the makecab.exe for?
Question: If I cannot Remove Components, then what is the point of nLite?
-- sorry if question #2 seems rude, i'm exasparated at trying this. So many others seem to be able to use this w/o error; and, I would like to as well.

==Edit again==
After Checking Event Viewer, I find this

Also these fault addresses:
=> 0x00013bbb
=> 0x00013ad3

==Edit...yes, again ==
OK, dug out my clean/gold xp (ie. no SP) .. same problems as above with makecab.exe from the original xp disc, not SP2's version.

Although I use nlite to process files for a win2k build, I am running it on an
XPsp2 system. Have not had any problems with makecab.exe
The version in my sys32 and ddlcache are 5.1.2600.2180 Size 84KB.
So I don't think it is TRULY a problem with makecab, since you guys verified the file by copying.

Have you tried running makecab on any file from a cmd prompt?

anfo1369, Expand this file and take makecab from there, it's legal
http://download.microsoft.com/download/pla...n-us/cabsdk.exe

Put it into your system32 folder by overwriting old one.
Also be sure there is no makecab.exe in nlite\data folder.

And if this helps then compress and attach example of not working makecab so I may detect it.

Thanks

Thanks,nuhi.
My RAM seems to have gone bad, i've run diagnostics and it failed.
This may have alot to do with my error..
I had to swap out my mainboard for a SDRAM one; however,
this one powered up 3 times and died on me.
Currently having to run my other system
Mainboard: Asus P2B-F
CPU: Pentium II 350@466
RAM: 2x 128MB PC133 SDRAM
OS: Windows 2000 Professional

I guess I won't be running nLite for awhile - It will be months
(hopefully Christmas) before the P4 will be back up and running.

I see you have overclocked your CPU, could you set it back to 350Mhz, run nlite again post your result?

I guess I won't be running nLite for awhile - It will be months
(hopefully Christmas) before the P4 will be back up and running.

I'm not even about to attempt it on here.

Is there a program to do make cab with a nice GUI front end like winrar or similar?

found it



http://www.msfn.org/board/index.php?showtopic=25442&hl=

I have the same problem with 1.0beta5 when integrating drivers, tried the above but still got the "...needs to close..."-scenario.
I previosly ran 0.99.9 without problems.

I run WinXP SP2 (5.1.2600)

*EDIT* Just rolled back to 0.99.9 and i see the same problems.
I get back to you when I have more info, something must have changed.

Alright, I've pinpointed the problem to this file: DISKKU.VER(file is part of a driver I downloaded from IBM, renamed here so i could attach it).
If I remove that file and then run Driver Integration everything work just fine, I don't get an error.

Maybe someone older and wiser than me figure out why.

rentz, I had similiar errors with some CAT files.
Makecab is weird...gonna replace it with some dll in one of the next versions.
Until then just delete that file before integration.
edit: ok, fixed in next version, still with makecab

Hello.
I am having the same problems with the latest RC1 version. Tried copying makecab.exe with no success.

Any solution?
Thanks.

Edit:

Well it has something to do with some Drivers I tried to integrate. I used BST (the latest as for 23/10/05) Drivers Pack, Havn't been able to locate the exact driver but it's one (or more) of the following:

1. Nvidia Sound.
2. Realtek Sound.
3. C-Media Sound.
4. Relatek Lan.
5. Via Lan.
6. Nvidia Lan.
7. ATI Graphics.
8. Nvidia Graphics.
9. Intel Lan.

I also haven't been able to make my nLited WinXP SP2 cd due to the makecab error I get.

I've tried everything, i used the old makecab version from '97 and the regular one that comes with XP SP2 but still nog luck.

I get the error at different stages of the nlite proces. Sometimes, when its integrating hotfixes, sometimes with the driver intergration and sometimes the final 2 steps.

Its driving me crazy, i've been trying for days now to make a nlited cd but still no goddamn luck.

My system is an AMD Athlon 64 3200+ and a DFI lanparty nforce3 ut 250 gb mobo.

Any help would me much appreciated.

Oh, and I even tried in Diagnostic mode and safe mode, but i still get the same makecab error.

Same problem here, trying for 3 hours with different configurations and still no luck...