Hi all, this is my first post here.
I have installed vista and everything works but I can't create a network bridge between 2 nics and i really need it

any idea? must i enable some hidden options or some strange services?

thanks

what is the error that you are getting when you try and connect the 2 NICs? does it actually create the bridge or does it not even get that far? need more detail i created a bridge with my NIC and Wlan card and it went through fine

when i select both the nics and i do a right-click with the mouse the options "create bridge" is disabled
i have tried with a loopback (fake) nic too and it doesn't work

are both NICs enabled? this can happen when one is not installed correctly, check the drivers on both and see if you can find a different version is possible to install with, also are both NICs plugged in with a network cable?

yes, they are. i have tried also with netsh and it says that the bridge component is not installed or something like this...

what build are you on 5308?

yes, 32bits 5308

I can confirm this issue, using build 5308. Three network adapters on my desktop, all work standalone, but vista will not let me bridge them (or any possible combination of them). Same applies to the network adapters on my laptop. They both work, but Vista will not bridge them.

This really needs to be fixed.

If this can help, I cannot also disable network adapters...

huh, i can disable both my cards fine, what kind of machine is it? i have tested dell D600s D610, GX 260, 270, 280, 520 all work without issue, all usining a broadcom or similar set for NIC chipset, i still think it is a driver issue but since some1ne said he had the same issue i am not so sure,

@some1ne

what kind of NIC are you using?
now is the bridge even available to choose or does it just create a network bridge that is disabled?

this is my pc:
athlon 64 3000+ @ 3500+
msi k8n-sli
1gb ddr pc3200
radeon x600 pro
hdd 80 + 40 + 250gb (maxtor+maxtor+seagate)
dvd burner 16x
1st nic: nvidia lan
2nd nic: realtek 8139