Full Version: Nero Lite v7.11.10.0 & v8.3.13.0
Nero 8.1.1.4 is officially released.
QUOTE
It seems to install fine but then bombs out with numerous registration errors, such as NeroFileDialog.dll and other dll/ax files
What can I try? should I make Vista reboot before Nero is installed?
What can I try? should I make Vista reboot before Nero is installed?
I had the same thing, no matter if audit or setupcomplete phase (OOBE) was used. Then I found out that the reason for this problem was an application I had installed prior to this during the unattended install phase, namely Acronis True Image. Somehow if I installed this before Nero (or Paint.net or MS Office for that matter -> showed similar problems) it would cause those installers to fail.
I now run Acronis setup at the end of audit phase and everything is fine. :-)
Took me quite a while to find the problem actually !
Bye,
Alex
Hi,
Since Acheron took the links down on his site, does anyone know where I can get the Nero 8 SDK?
Thanks in advance.
Since Acheron took the links down on his site, does anyone know where I can get the Nero 8 SDK?
Thanks in advance.
Problem:
When installing Nero Lite with Windows 2000 I got these errors at the end of the installation, when it attempts to register files...
unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3
...which happens when attempting to register these two files...
NeroFileDialog.dll
CoverEdCtrl.ocx
Solution:
Find a copy of gdiplus.dll and install it in your winnt\system folder.
Then register the files by hand, eg...
regsvr32 "c:\program files\common files\nero\lib\NeroFileDialog.dll"
Sorted :-)
P.S. I've been looking for "something like nero, but really slimmed down, cause it's totally bloated! you know, something like k3b" for ages - and I've finally found it!
Good work - keep it up.
Thanks.
When installing Nero Lite with Windows 2000 I got these errors at the end of the installation, when it attempts to register files...
unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3
...which happens when attempting to register these two files...
NeroFileDialog.dll
CoverEdCtrl.ocx
Solution:
Find a copy of gdiplus.dll and install it in your winnt\system folder.
Then register the files by hand, eg...
regsvr32 "c:\program files\common files\nero\lib\NeroFileDialog.dll"
Sorted :-)
P.S. I've been looking for "something like nero, but really slimmed down, cause it's totally bloated! you know, something like k3b" for ages - and I've finally found it!
Good work - keep it up.
Thanks.
Yeah, I removed gdiplus previously cause it was pretty big to include. However if footprint is not a big issue I will include gdiplus.dll back in next build.
Anyway I have changed my mind. I will host these files again online, using a public upload site.
Anyway I have changed my mind. I will host these files again online, using a public upload site.
Hello Acheron,
first of all many thanx for your great work!
I just installed your Nero 8.1.1.3 Lite (like the versions before) and it works great for me!
I just want to ask you how difficult would it be to build a Nero Lite 8 "Special Edition" or Nero Lite 8 "Add-on" with Nero Recode?
Or do you (or anyone) know how I could add Nero Recode (only) to an Nero Lite installation?
Many thanx!
Oisin
first of all many thanx for your great work!
I just installed your Nero 8.1.1.3 Lite (like the versions before) and it works great for me! I just want to ask you how difficult would it be to build a Nero Lite 8 "Special Edition" or Nero Lite 8 "Add-on" with Nero Recode?
Or do you (or anyone) know how I could add Nero Recode (only) to an Nero Lite installation?
Many thanx!
Oisin
QUOTE (Acheron @ Nov 24 2007, 01:08 PM) 
Anyway I have changed my mind. I will host these files again online, using a public upload site.
thanks Acheron
I'm sure everybody will join in making mirrors of the files if you like....have a great day, cu
wf
Acheron you can use www.mihd.net and www.zshare.net to host the new releases, both support Download Managers/Accelerators.
+1 for mihd.net, very powerful
Acheron: Any news about the 8.1.1.4 Lite/Micro?
upload to host automatic upload various hosts
http://s4.massmirror.com/
http://www.shareonall.com
www.rapidshare.com [max. 100 MB]
www.megaupload.com [max. 500 MB]
www.filefactory.com [max. 300 MB]
www.depositfiles.com [max. 300 MB]
www.zshare.net [max. 100 MB]
http://www.ftp2share.com/index.html
http://s4.massmirror.com/
http://www.shareonall.com
www.rapidshare.com [max. 100 MB]
www.megaupload.com [max. 500 MB]
www.filefactory.com [max. 300 MB]
www.depositfiles.com [max. 300 MB]
www.zshare.net [max. 100 MB]
http://www.ftp2share.com/index.html
excellent links {_carnificina_} !
So, let's go then!
As I said in a comment on Archerons blog, this system would work fine:
1. post the MD5 hashes for the latest release of Nero Lite on Acherons page or in this thread (we need Acheron or some other trusted party to do this)
2. post the Nero Lite files (matching the MD5 hashes) to some file host and link to them here
3. ask others (that means all we forum participants) to repost the files to other hosts and post links here, so that there's always a steady supply of download locations
4. finally, advice everyone to check the MD5 hash of any downloaded file before installing, so that it hasn't been tampered with.
There are many excellent tools for easily and swiftly checking MD5 values, like winmd5sum ( http://portableapps.com/apps/utilities/winmd5sum_portable ) and Hasher ( http://www.den4b.com/downloads.php?project=Hasher ).
For the moment, all Acheron really needs to do is to post the MD5 hashes for the last released version, since folks who already have it can then themselves re-upload it and post links here and the rest of us can compare those files to the MD5 hashes Acheron provides.
So please get this rolling ASAP!
So, let's go then!
As I said in a comment on Archerons blog, this system would work fine:
1. post the MD5 hashes for the latest release of Nero Lite on Acherons page or in this thread (we need Acheron or some other trusted party to do this)
2. post the Nero Lite files (matching the MD5 hashes) to some file host and link to them here
3. ask others (that means all we forum participants) to repost the files to other hosts and post links here, so that there's always a steady supply of download locations
4. finally, advice everyone to check the MD5 hash of any downloaded file before installing, so that it hasn't been tampered with.
There are many excellent tools for easily and swiftly checking MD5 values, like winmd5sum ( http://portableapps.com/apps/utilities/winmd5sum_portable ) and Hasher ( http://www.den4b.com/downloads.php?project=Hasher ).
For the moment, all Acheron really needs to do is to post the MD5 hashes for the last released version, since folks who already have it can then themselves re-upload it and post links here and the rest of us can compare those files to the MD5 hashes Acheron provides.
So please get this rolling ASAP!
QUOTE (Acheron @ Nov 12 2007, 05:29 AM)
I would like to know the current state of Labelflash / Lighscribe support in Nero 8 Lite. Does everything work or is it broken?
Hi. Lightscribe tested and fully working in the Nero 8.1.1.3 Lite release.
Cheers
:BTW, has anyone here successfully created a Thinstalled version of Nero 8? I have tried for some time but all created .exe files fail to launch with error code 5305 which I believe is serial expired related, even though a valid serial number has been entered.
Since no one is acting on my good idea above I had to do some googling myself until I found the files.
Here are two download locations and MD5 / SHA1 hashes for the files. Now we need Acheron or (2nd best) others to confirm that the MD5 / SHA1 hashes match the original files Acheron released...
http://www.afterdawn.com/software/video_so...s/nero_lite.cfm
Nero-8.1.1.3_english_lite.exe
MD5 99329da9221ea993709c85829b607f9c
SHA1 c62fbe18284958892d5fae2f956c92723ccb1e54
http://www.afterdawn.com/software/video_so.../nero_micro.cfm
Nero-8.1.1.3_english_micro.exe
MD5 757e2630fd3cb552f659f16b381758ef
SHA1 1df238ebf03ba1cbdd75762646e80abf61fdf4f1
(I had some trouble logging in so I re-registered but this is the same person as hurk7 above)
Here are two download locations and MD5 / SHA1 hashes for the files. Now we need Acheron or (2nd best) others to confirm that the MD5 / SHA1 hashes match the original files Acheron released...
http://www.afterdawn.com/software/video_so...s/nero_lite.cfm
Nero-8.1.1.3_english_lite.exe
MD5 99329da9221ea993709c85829b607f9c
SHA1 c62fbe18284958892d5fae2f956c92723ccb1e54
http://www.afterdawn.com/software/video_so.../nero_micro.cfm
Nero-8.1.1.3_english_micro.exe
MD5 757e2630fd3cb552f659f16b381758ef
SHA1 1df238ebf03ba1cbdd75762646e80abf61fdf4f1
(I had some trouble logging in so I re-registered but this is the same person as hurk7 above)
Nero-8.1.1.3_english_micro.exe
MD5: 757e2630fd3cb552f659f16b381758ef [confirm!]
Digital Signature: Monday, 12 November, 2007 03:57:59
MD5: 757e2630fd3cb552f659f16b381758ef [confirm!]
Digital Signature: Monday, 12 November, 2007 03:57:59
Thanks cybpsych! In my view, if folks with a trackrecord of serious posts in these forums for several years (like cybpsych has, unlike me for example who almost never post) can confirm the hashes then that's reliable enough, though confirmation from Acheron would of course be optimal.
Now if someone could also confirm the Nero-8.1.1.3_english_lite.exe hash.
In my view, if folks with a trackrecord of serious posts in these forums for several years (like cybpsych has, unlike me for example who almost never post) can confirm the hashes then that's reliable enough, though confirmation from Acheron would of course be optimal.Now if someone could also confirm the Nero-8.1.1.3_english_lite.exe hash.
Hashes for original files (not zips) are also here if somebody need them.
good find, amitri ... this is the mirror that Acheron linked in his (former) site ... i knew i saw it somewhere, but couldn't point my finger where 
Excellent file host amitri - I got on average 2MB/s in download speed from it. I'm reposting the hashes from your page. It would be great if anyone else can confirm the hashes for the two last releases (from some other source, ideally downloaded directly from Acherons page).
Nero-8.1.1.3_english_lite.exe
MD5: 99329DA9221EA993709C85829B607F9C [amitri, afterdawn]
SHA-1: C62FBE18284958892D5FAE2F956C92723CCB1E54 [amitri, afterdawn]
Nero-8.1.1.3_english_micro.exe
MD5: 757E2630FD3CB552F659F16B381758EF [amitri, afterdawn, cybpsych]
SHA-1: 1DF238EBF03BA1CBDD75762646E80ABF61FDF4F1 [amitri, afterdawn]
Nero-8.1.1.3_europe_lite.exe
MD5: 55D59EE8AE48629712CDEAC414FB1DE1 [amitri]
SHA-1: 66A3499678570A93FD5CC2D519051523FD93D1C5 [amitri]
Nero-8.1.1.3_europe_micro.exe
MD5: 0052A5DA378BA8BF046E8D2900014D6A [amitri]
SHA-1: D0A7D31E5910052674AB3AD2DF9559CD9894746A [amitri]
Nero-8.1.1.3_english_lite.exe
MD5: 99329DA9221EA993709C85829B607F9C [amitri, afterdawn]
SHA-1: C62FBE18284958892D5FAE2F956C92723CCB1E54 [amitri, afterdawn]
Nero-8.1.1.3_english_micro.exe
MD5: 757E2630FD3CB552F659F16B381758EF [amitri, afterdawn, cybpsych]
SHA-1: 1DF238EBF03BA1CBDD75762646E80ABF61FDF4F1 [amitri, afterdawn]
Nero-8.1.1.3_europe_lite.exe
MD5: 55D59EE8AE48629712CDEAC414FB1DE1 [amitri]
SHA-1: 66A3499678570A93FD5CC2D519051523FD93D1C5 [amitri]
Nero-8.1.1.3_europe_micro.exe
MD5: 0052A5DA378BA8BF046E8D2900014D6A [amitri]
SHA-1: D0A7D31E5910052674AB3AD2DF9559CD9894746A [amitri]
Hi hurk777, as you might have noticed I have added my digital signature to all setup files. So when you right-click the Nero-lite setup file you can check if the file attached with it is correct. No need for hashes.
RapidShare mirrors for
Nero-8.1.1.3_english_lite.exe
MD5: 99329DA9221EA993709C85829B607F9C
SHA-1: C62FBE18284958892D5FAE2F956C92723CCB1E54
http://rapidshare.com/files/73994374/Nero-...nglish_lite.exe
Nero-8.1.1.3_english_micro.exe
MD5: 757E2630FD3CB552F659F16B381758EF
SHA-1: 1DF238EBF03BA1CBDD75762646E80ABF61FDF4F1
http://rapidshare.com/files/73994548/Nero-...glish_micro.exe
Nero-8.1.1.3_english_lite.exe
MD5: 99329DA9221EA993709C85829B607F9C
SHA-1: C62FBE18284958892D5FAE2F956C92723CCB1E54
http://rapidshare.com/files/73994374/Nero-...nglish_lite.exe
Nero-8.1.1.3_english_micro.exe
MD5: 757E2630FD3CB552F659F16B381758EF
SHA-1: 1DF238EBF03BA1CBDD75762646E80ABF61FDF4F1
http://rapidshare.com/files/73994548/Nero-...glish_micro.exe
Is there any possibility of having Nero Custom Applications Builder for 7.x and 8.x versions of Nero.... i mean the way silent installation method was made easy for previous older versions of Nero viz. 6.x cant v have the same type of custom builder for latest versions..... what do you all have to say about this.....? 
I have did some more work on the Nero Lite SDK. It's almost ready for release. Good news about next SDK is that you don't have to manually copy files over anymore, so building your own version should be more easy.
furthermore I do plan to upload some binary packages.
Nero 8.1.1.4 Lite is only bugfix release plus by default additional languages will not be installed.
furthermore I do plan to upload some binary packages.
Nero 8.1.1.4 Lite is only bugfix release plus by default additional languages will not be installed.
Hi Acheron!
It would be possible, in the next release, implement a swith to force the language for the unattended installation ?
Example: installing in to XP Italian operating system NERO Lite with French language or any other NOT Italian language active... or be able to install all the languages of the region to allow the selection manually after install.
It would be possible, in the next release, implement a swith to force the language for the unattended installation ?
Example: installing in to XP Italian operating system NERO Lite with French language or any other NOT Italian language active... or be able to install all the languages of the region to allow the selection manually after install.
can anyone post the accepted componenets for setup? thanks.
QUOTE (Acheron @ Dec 2 2007, 03:23 PM)
Hi hurk777, as you might have noticed I have added my digital signature to all setup files. So when you right-click the Nero-lite setup file you can check if the file attached with it is correct. No need for hashes.
Hi Acheron
, Good to see you back with a new version of Nero Lite!
No I hadn't noticed the digital signature actually and I really don't know much (or rather anything) about such digital signatures in files. I see it now when I look for it, but how exactly do I check if an .exe is correctly signed or not? Is it enough to see the correct name at the first screen or should I always check that the same serial number ( 03 a2 ea ) is included? If a file has been tampered with, how is that described on that right-click tab?If the signatures makes posting hashes redundant then all the better. But in that case I think you should post a note about it clearly on your homepage so that all users know about right away. Keep up the extremely good work!
I don't think people should worry about file hashes anyway. In case the digital signature is not correct you should get some warning message when launching the application.
I have uploaded a new SDK. Now the SDK contains also the Inno Setup OneClick package plus a new batch file to automaticly extract the Nero 8 installer
NeroLite8114sdk.7z
Note 7-zip and Reshacker are not included. Read the readme before asking questions!
I have uploaded a new SDK. Now the SDK contains also the Inno Setup OneClick package plus a new batch file to automaticly extract the Nero 8 installer
NeroLite8114sdk.7z
Note 7-zip and Reshacker are not included. Read the readme before asking questions!
QUOTE (Acheron @ Dec 9 2007, 02:26 PM)
I have uploaded a new SDK. Now the SDK contains also the Inno Setup OneClick package plus a new batch file to automaticly extract the Nero 8 installer
NeroLite8114sdk.7z
NeroLite8114sdk.7z
File not found. Error 404
QUOTE (radix @ Dec 9 2007, 07:53 AM)
File not found. Error 404
Works for me.
QUOTE (roirraW @ Dec 9 2007, 03:31 PM)
QUOTE (radix @ Dec 9 2007, 07:53 AM)
File not found. Error 404
Works for me.
Now it works.
It missing CodeSigning from Tools folder or I am wrong?
CodeSigning is not necessary.
I got these errors when I tried to build Nero Lite and Nero Micro 8.1.1.4:
NeroLite_english.cmd-error
[img=http://img235.imageshack.us/img235/4299/43186278iv3.th.jpg]
NeroLite_compile.cmd-error1
[img=http://img217.imageshack.us/img217/5171/37081794pt3.th.jpg]
NeroLite_compile.cmd-error2
[img=http://img217.imageshack.us/img217/7584/73601757ct4.th.jpg]
NeroLite_english.cmd-error
[img=http://img235.imageshack.us/img235/4299/43186278iv3.th.jpg]
NeroLite_compile.cmd-error1
[img=http://img217.imageshack.us/img217/5171/37081794pt3.th.jpg]
NeroLite_compile.cmd-error2
[img=http://img217.imageshack.us/img217/7584/73601757ct4.th.jpg]
QUOTE (radix @ Dec 10 2007, 11:05 AM)
I got these errors when I tried to build Nero Lite and Nero Micro 8.1.1.4:
NeroLite_english.cmd-error
[img=http://img235.imageshack.us/img235/4299/43186278iv3.th.jpg]
NeroLite_compile.cmd-error1
[img=http://img217.imageshack.us/img217/5171/37081794pt3.th.jpg]
NeroLite_compile.cmd-error2
[img=http://img217.imageshack.us/img217/7584/73601757ct4.th.jpg]
NeroLite_english.cmd-error
[img=http://img235.imageshack.us/img235/4299/43186278iv3.th.jpg]
NeroLite_compile.cmd-error1
[img=http://img217.imageshack.us/img217/5171/37081794pt3.th.jpg]
NeroLite_compile.cmd-error2
[img=http://img217.imageshack.us/img217/7584/73601757ct4.th.jpg]
The first image: it's not actually an error, but a succeed message.
The third one, however, is an error, and I have the same problem
I don't have the Custom folder that the installer script needs. Any tip?
You can set option SignedUninstaller=false in NeroLite_base.iss to skip code signing.
I also forgot to tell that you should rename micromize folder to custom.
I also forgot to tell that you should rename micromize folder to custom.
Oh man,
It is fully working...And how it is working!!!
Marvelous!!!
Fantastic!!!
Thank You, Acheron!!!
This is the real masterpiece!
Just great!
Alex
It is fully working...And how it is working!!!
Marvelous!!!
Fantastic!!!
Thank You, Acheron!!!
This is the real masterpiece!
Just great!
Alex
QUOTE (Acheron @ Dec 10 2007, 03:53 PM)
You can set option SignedUninstaller=false in NeroLite_base.iss to skip code signing.
I also forgot to tell that you should rename micromize folder to custom.
I also forgot to tell that you should rename micromize folder to custom.
But we have to run those scripts to build lite, right?
By the way the path to ResHacker isn't right in those scripts
QUOTE (darks0ul @ Dec 11 2007, 08:12 AM)
By the way the path to ResHacker isn't right in those scripts
The folder must be named Reshack not Reshacker (minor problem).
Can someone please post instructions and download links to the applications needed. The original instructions are a bit confusing for me.
QUOTE (Jamaicangalist @ Dec 11 2007, 08:16 PM)
Can someone please post instructions and download links to the applications needed. The original instructions are a bit confusing for me.
This is a modified readme from Acheron:
1. Download 3rd party stuff
Reshacker.exe and 7za.exe should be put in Tools\Reshack and Tools\7-zip.
2. Install Inno Setup Once Click package
Installation script (install.cmd) can be found in Tools directory.
3. Extract Nero 8 files
Place Nero 8 setup in main directory. Run NeroLite_extract.cmd to extract Nero 8. Please read instructions from NeroLite_extract.cmd (edit it and read). Not all files are included.
DrWeb virus definitions, MauSau plugins and Nero Help files should be copied manually to their corresponding subdirectories in Custom folder (DrWeb, MauSau, Help).
4. Run batch scripts in Custom directory
This will remove even more stuff from Nero binary files.
5. Run language specific batch script in Script directory
After preprocessing some error message will be displayed. Ready to use setup scripts are copied to main dir.
6. Run NeroLite_compile.cmd in main directory
If setup files are stored in directory Output, you have successfully compiled Nero Lite.
After completing the installation (english micro, or lite european) I have an error: Runtime Error (at 104:197): Internal error: ExtractTemporaryFile: the file "WizardBitmapImage2.bmp" was not found.
Everything else seems to be working.
Everything else seems to be working.
QUOTE (radix @ Dec 11 2007, 02:12 PM)
QUOTE (Jamaicangalist @ Dec 11 2007, 08:16 PM)
Can someone please post instructions and download links to the applications needed. The original instructions are a bit confusing for me.
This is a modified readme from Acheron:
1. Download 3rd party stuff
Reshacker.exe and 7za.exe should be put in Tools\Reshack and Tools\7-zip.
2. Install Inno Setup Once Click package
Installation script (install.cmd) can be found in Tools directory.
3. Extract Nero 8 files
Place Nero 8 setup in main directory. Run NeroLite_extract.cmd to extract Nero 8. Please read instructions from NeroLite_extract.cmd (edit it and read). Not all files are included.
DrWeb virus definitions, MauSau plugins and Nero Help files should be copied manually to their corresponding subdirectories in Custom folder (DrWeb, MauSau, Help).
4. Run batch scripts in Custom directory
This will remove even more stuff from Nero binary files.
5. Run language specific batch script in Script directory
After preprocessing some error message will be displayed. Ready to use setup scripts are copied to main dir.
6. Run NeroLite_compile.cmd in main directory
If setup files are stored in directory Output, you have successfully compiled Nero Lite.
Note: Rename Micromize to Custom
Copy these files into Custom\DrWeb: DRWEBASE.VDB, NeDwFileHelper.exe, Drweb32.dll
(these files is located in Bin\Core folder).
Make a search in Bin folder for .chm and copy all the files in Custom\Help (after this, I
downloaded help file for Nero 8 from their site, unpack it and copy all .chm files in Help
folder. overwritting old files).
Copy all files from Common Files\Audio Plugins (16 files) into MauSau folder.
Thank you, I understand these instructions but; links to applications and plugins would be great. Any help greatly appreciated.
Nero Lite 8.1.1.4 Lite and Micro binary packages are now available from my site: http://updatepack.nl
Anyaway I release SDK so people can easily spot errors, create addons (for example Nero Recode / Nero Vision). Reason I don't include it with Lite is that I personally don't use these features, and would take additional time to fix for each release of Nero.
I would appreciate it if people would not directly link to the files, but instead the download page. So you can make sure download links are correct.
Anyaway I release SDK so people can easily spot errors, create addons (for example Nero Recode / Nero Vision). Reason I don't include it with Lite is that I personally don't use these features, and would take additional time to fix for each release of Nero.
I would appreciate it if people would not directly link to the files, but instead the download page. So you can make sure download links are correct.
Thanks Acheron
Great!
Starting with this release Nero 8 Lite has earn itself a big and shiny Softpedia Pick! Congrats!
We're also hosting the Lite (English + Asian) and Micro versions on our servers, feel free to use those links too
http://www.softpedia.com/get/CD-DVD-Tools/...ro-8-Lite.shtml
PS: I hope you received our notification e-mails
Starting with this release Nero 8 Lite has earn itself a big and shiny Softpedia Pick! Congrats!
We're also hosting the Lite (English + Asian) and Micro versions on our servers, feel free to use those links too
http://www.softpedia.com/get/CD-DVD-Tools/...ro-8-Lite.shtml
PS: I hope you received our notification e-mails
QUOTE
Thank you, I understand these instructions but; links to applications and plugins would be great. Any help greatly appreciated.
Download ResourceHacker here, extract and place only the ResHacker.exe in Tools\Reshack Go here and download the 7za***.zip (where *** is the version number) from the latest 7-Zip command line version. Extract and place only the 7za.exe in the Tools\7-zip folder.
@Acheron
Great job as always.
I'm trying 8.1.1.4 Lite now and labelflash still gives me the "could not open the editor" error. Will try SDK myself ASAP.
Im running into a wierd possible bug making an audio cd with Nero Lite 8.1.1.4.
Just installed it this morning, and am trying to make a cd of some of my bands tracks for someone at work.
I have the tracks all in Nero, I right click them, select properties, set the gap between tracks to 0, hit ok looks good.
If I open up the Compilation properties window again, it resets the gaps to 2 seconds on its own.
Just went, set them back to 0 seconds, burned my disc..
Upon burning, the Nero window shows the gaps at 2 seconds again and what do you know it burned my disc with 2 second gaps even though I had just told it 0..
Is it just me or anybody else verify this?? Supposed I could go install the retail Nero 8 and see if its there too..
Just installed it this morning, and am trying to make a cd of some of my bands tracks for someone at work.
I have the tracks all in Nero, I right click them, select properties, set the gap between tracks to 0, hit ok looks good.
If I open up the Compilation properties window again, it resets the gaps to 2 seconds on its own.
Just went, set them back to 0 seconds, burned my disc..
Upon burning, the Nero window shows the gaps at 2 seconds again and what do you know it burned my disc with 2 second gaps even though I had just told it 0..
Is it just me or anybody else verify this?? Supposed I could go install the retail Nero 8 and see if its there too..
QUOTE (slavestate @ Dec 12 2007, 07:27 PM)
Im running into a wierd possible bug making an audio cd with Nero Lite 8.1.1.4.
Just installed it this morning, and am trying to make a cd of some of my bands tracks for someone at work.
I have the tracks all in Nero, I right click them, select properties, set the gap between tracks to 0, hit ok looks good.
If I open up the Compilation properties window again, it resets the gaps to 2 seconds on its own.
Just went, set them back to 0 seconds, burned my disc..
Upon burning, the Nero window shows the gaps at 2 seconds again and what do you know it burned my disc with 2 second gaps even though I had just told it 0..
Is it just me or anybody else verify this?? Supposed I could go install the retail Nero 8 and see if its there too..
Have you tried to put gap to 2 ONLY for the first track and leave all others to 0, is it OK?
Just installed it this morning, and am trying to make a cd of some of my bands tracks for someone at work.
I have the tracks all in Nero, I right click them, select properties, set the gap between tracks to 0, hit ok looks good.
If I open up the Compilation properties window again, it resets the gaps to 2 seconds on its own.
Just went, set them back to 0 seconds, burned my disc..
Upon burning, the Nero window shows the gaps at 2 seconds again and what do you know it burned my disc with 2 second gaps even though I had just told it 0..
Is it just me or anybody else verify this?? Supposed I could go install the retail Nero 8 and see if its there too..
Well the Redbook standard requires the 2 second gap at the beginning so yeah it has to be there..
Just reinstalled 8.1.1.3 guess it does it there as well.
What I usually do is, throw all my tracks in, get the names cleared up.
Then I select everything from track 2 to the end, right click, select Properties, set the gap to 0 and hit apply.
Usually works a charm. But apparently Nero wants to reset it even if you dont open the Comp Properties window again, since my burns came out with the gaps.
I did just figure out if I go into the Compilation Properties, check the box for No Pause Between Tracks, then set track 1 back to 2 seconds, it looks like its sticking..
Only got two blanks left now so lets hope this works!!
Just reinstalled 8.1.1.3 guess it does it there as well.
What I usually do is, throw all my tracks in, get the names cleared up.
Then I select everything from track 2 to the end, right click, select Properties, set the gap to 0 and hit apply.
Usually works a charm. But apparently Nero wants to reset it even if you dont open the Comp Properties window again, since my burns came out with the gaps.
I did just figure out if I go into the Compilation Properties, check the box for No Pause Between Tracks, then set track 1 back to 2 seconds, it looks like its sticking..
Only got two blanks left now so lets hope this works!!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.