yes yadzil i removed hotfixes that were superseeded.
xable keeps also the old fixes.....

OK, maybe I'm just dense, but can anyone point me to a How-To that shows or explains the step-by-step process?

I didn't see one anywhere on the downloads page for the slipstreamer...is it a help file thats installed with the app?

What do I download before running the slipstreamer? WMP11, Hotfixes, nLite? Does the slipstreamer only work with nLite? (no, I have not yet used nLite either, but there is good documentation for it)

I'm really at a loss of where to even start the process.

first u download slipstreamer
then download hotfixes that are on slipstreamer's page and wmp11 installer from microsoft.
after this u copy the os source to your hard drive.
start slipstreamer and u have to insert wmp 11 installer, os source and hotfixes. then press start and wait for the slipstreamer to finish.

also slipstreamer can work with nlite. u can find more info in this post: http://www.msfn.org/board/index.php?showto...st&p=682238

OK, that was simple enough, thanks.

bump, nevermind.

Does it work with HFSLIP'd source too?

i never tried it so i cant say...but basically it should. of course only for supported oses

version 0.94 out

changelog
- Fixed a potential bug that can lead to an error locating the file in hotfixes that have new files in nested subfolders
- Fixed a bug that lead to old catalogs being mistakenly added if a hotfix is superceded by another that has the updated file in a subfolder inside the hotfix archive

After installation application (0.94i) does not start.

System Error 0cx0000135
Application could not start
Press OK to close.

I get it both on my system and my Virtual PC.

Can someone explain ?

do u have .net framework 2 installed?

I had used 0.0.9.1 to slipstream WMP11 and the hotfixes on your page to perfection however i upgraded 0.0.9.4 and used it to slipstream wmp11 and the fixes into source and when windows booted up as it was customizing settings it came to wmp11 and it stated that a reboot was required for settings to take effect and it had me select yes or no. This is not a huge deal but this prompt is not what i want in my xp unattended.

using xp sp2 with hotfixes reintegrated with nlite.

please attach your nlite preset without editing it

I'm having the same issue only I just used nLite 1.4 final to integrate tweaked version.

(Edit) Not sure why, but this installation went off without the "must restart" issue.
The only thing I changed is I didn't include the DirectX Nov. Update addon.

well i think u just respond yourself.....
i dont have anything in the addons or in the slipstreamer that asks for restart....so i think one of your addons are asking for that.

Yea, I'm not sure what the November DirectX update had to do with customizing settings for wmp11, but that's when it stated that a reboot was required for wmp11 settings to take effect and it had me select yes or no to restart. Oh well, it's no longer a problem.

version 0.95 is out
changelog:
Fixed a minor issue in cabinet.dll interface, where upon decompressing a file, it was unnecessarily being opened in Read/Write mode.

where did the downloads go?

what downloads are u talking about???
as for wmp slipstreamer u find the dl link on its page.........

ooh ok.. u have hidden it ..

ok i have a few questions..
i am integrating k-lite codec pack, it is installing the wmp classic, however it cant play wmv(properly)
and i have removed wmp and wmp 6.4.
does this mean i need to keep wmp in the list?
why are u slipstreaming? and not using an addon?
i need this as addon so that i can keep the extensions to proper player?

search this forum is your "friend"........

Hello,

I tray to Slipstreamer Wmp11 in my WinXp Home Sp2 PT but the WMP11 Slipstreamer give me this error:

WMP11Slipstreamer v0.95

System.ComponentModel.Win32Exception: O sistema não conseguiu localizar o ficheiro especificado
em Epsilon.Win32.Resources.ResourceEditor.throwWin32Exception()
em Epsilon.Win32.Resources.ResourceEditor.loadResourceLibrary()
em WMP11Slipstreamer.CM.GetCabData(String pathToSfxCab)
em WMP11Slipstreamer.Backend.NativeExtractHotfix(String hotfixInstaller, String destinationPath)
em WMP11Slipstreamer.Backend.ExtractWMP11Installer()
em WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)

Deleting "L:\WinXp Junta\WinXp\i386\wmp11temp"... Done!

The source being modified has not been damaged.
All changes have been successfully reverted.

I tray to Slipstreamer holy the wmp11, no updetes... I tray using Slipstreamer 0,95 and nLite but it give me the same error... Can you help me, please???

PS: My englis is not very good, sorry...

Problem with WinNT32 installation

Hi Boooggy,

Thanks for all the good work integrating WMP11. I found something strange; maybe you can have a look.

I started from a clean WinXP Pro, integrate SP2 with the MS method, and also integrate RAID drivers with the MS method ($OEM$ etc)

After that I integrated WMP11 vanilla with your 0.95 integrator and all hotfixes applied.

I installed the integrated WinXP with the WinNT32.exe method (from one partition to another); when it comes to component registration I get a message that ICFGNT.dll cannot be registered (because it is not found).
After that the completed windows is largely disfunctional.

ICFGNT.dll is not normally present in a clean install. The only reference to ICFGNT.dll is in I386\WIN9XUPg\MIGDB.inf. A similar problem is also discussed here. It looks like some upgrade installation is attempted.

EDIT: After I integrate IE7 with nLite 1.4 the IFCGNT.dll problem is gone.

Well you might say you do not support WinNT32 installations, but I got it going for pretty complex installations, and also your previous add-ons. I found that the WinNT32.exe method is generally a little more picky than CD installations. Maybe it gives a clue for some problem.


Thanks for looking,

is KB931756 a valid hotfix for wmp11 and the slipstreamer??

this hotfix is already superseeded by kb942264. please check slipstreamer site.

thanks, just double checking because some post whore elsewhere was making a big deal about it.

u can integrate all wmp fixes ....if u have nothing else to do.....slipstreamer will do it and superseed the files if its needed.

Unhandled exception, problems with WinXP x64 SP2

If have done this one or two times but now for the first time an UEE:

WMP11Slipstreamer v0.95

System.ComponentModel.Win32Exception: The system cannot find the file specified
at Epsilon.Win32.Resources.ResourceEditor.throwWin32Exception()
at Epsilon.Win32.Resources.ResourceEditor.loadResourceLibrary()
at WMP11Slipstreamer.CM.GetCabData(String pathToSfxCab)
at WMP11Slipstreamer.Backend.NativeExtractHotfix(String hotfixInstaller, String destinationPath)
at WMP11Slipstreamer.Backend.ExtractWMP11Installer()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)

In a previous installation I had problems that:
-"Play All" from an Explorer window did not start with the first file
-Skip forward and backward did not work

I use a WinNT32 installation, just wanted to try a CD install but cannot get past the UEE

BikinDutchman,
what is the folder name containing the wmp installer? please write the full path....
and please try to move the wmp installer to other folder...and see if this help.

Boooggy,

Sorry I just picked the wrong installer file (WindowsServer2003.WindowsXP-KB930627-x64-ENU.exe) file .

I would certainly help if the integrator would detect such stupid moves, but for that you would need some positive identification of the real installers.

Thanks for help anyway, I will keep looking into the other problem.

Problem with "Play All" feature in WinXPx64

I did a CD installation for WinXP x64, integrated withg v0.95 and all hotfixes.

I observed a problem that I also had with the x64 add-on (now pulled):

For a music folder it is possible to select "Play All" in the left panel of an explorer window. This starts WMP11 that plays all files sequentially (you can skip forward and backward).
However this does not work in the above integrated install. WMP11 opens just one file from the list (looks like the oldest file).

This problem is gone after I overinstall with the official installer (no mistakes this time ).
I do not see this problem in x86 installations.

This looks like some registration error to me but actually have no clue.

Boooggy, I hope you can figure it out; I will test immediately.

oki will try to reproduce
and i supposed u chosed tweaked version.....

No it was vanilla!

I did not try the tweaked yet.

new version out

changelog in 0.96
1. Added more checks to block slipstream if selected installer doesn't match the source (by parsing control.xml). This was the reason of some "File not found" errors when extracting the installer.
2. Fixed an issue where .NET GC wasn't executing SafeHandles' destructors fast enough leading to a temporary file handle leak causing "File in use" errors.
3. Added a check for hotfix existence

in the past, windowsmedia11-kb941282-x86-intl.exe is included in the wmp11 hotfix list, why is it not there now???

Boooggy:

It looks on your web site in the "Requirements:" section,

you have recently added 2 hotfixes:

windowsmedia11-kb942264-x86-intl.exe

and

windowsmedia11-kb944110-x86-intl.exe,


and that you recently removed one hotfix:

windowsmedia11-kb941282-x86-intl.exe


Is that right? Is the windowsmedia11-kb941282-x86-intl.exe still supposed to be part of the integration now or not?

Your program has been working very well for me! Thank you for it!

941282 was superseeded by 942264. so 941282 its not needed.

i keep the hotfix list as clean as possible, everytime when a hotfix is superseeded that specific hotfix is removed and the new one is added.
for people that want to use all fixes please go to xables's share and download all from there and then slipstream. wmp11 slipstreamer will work with all of them no matter what, choosing the right files to add on the cd.

@boooggy

thank you for the explanation... and more thanks to your slipstreamer, great software!!!

Doesn't Work For Me...

Old Version 0.94i Show the Error SafeHandles During the Slipstream Process...

New 0.96 Slipstream Fine But in My 8 Atteptions I Have a Several Bugs... Some Times WMP11 Works Perfectly But SO Has a Several Bugs Like Don't Maxime Windows of All Programs (close when try maximize), I Try Make Some Modifications in NLITE And Then Error Occours in First Boot (error says: can't register wmplayer...), and Internet Explorer 7 Doesn't Work...

I Try a Lot of Diferent Configs, Try Install With And Without WMP Hotfixes And Always See Above Problems..

Can You Help?

Anyway Thanks For This Great Program And Sorry For My Poor English...

Sydnelson
can u please attach (dont copy/paste) your nlite preset?
also please attach sysoc.inf, wmp11.inf, wmp11ext.inf.
thx

Boooggy,

I tried version 0.96i on a clean WinXP x64 installation but the problem with "Play All" is still there.

Not sure if you had time to look at it but I just wanted to let you know.

Thanks For Fast Reply...

I ZIP the Files You Need...

syd
tried the files u sent with few little modifications (i used english xp, ryans update pack and ie7 pack)
no errors.
i didnt integrate all that drivers tho.........

anyway....please try one step in a row.
slipstream wmp and hotfixes in one row ...then try in vmware.
if everything ok go further
nlite with only fixes
and so on......

Hi

I tried this on fresh xp pro oem. Selected vanilla and all the wmp hotfixes. Everything went fine. Then used nlite and xables nov update pack. No error messages. After installing, the only problem is, in wmp, the "recently played files" is always empty.

After that tried slipstream without any hotfixes.
Then used nlite to integrate wmp hotfixes.
Still the "recently played files" in wmp is empty.

Any solutions?

Thanks

I got the following error when I tried to slipstream WMP11 (Vanilla) into a Italian Windows XP pro SP1 (which was updated to SP2 and latest hotfixes by nlite.)

ddead
what fixes do u use?

for WMP
everything that Windows Update Downloader program listed + those listed in your website.

windowsmedia11-kb928788-x86-intl.exe
WindowsMedia11-KB929399-v2-x86-INTL.exe
windowsmedia11-kb929773-x86-intl.exe
windowsmedia11-kb932390-x86-intl.exe
windowsmedia11-kb933547-x86-intl.exe
windowsmedia11-kb935551-x86-intl.exe
windowsmedia11-kb935552-x86-intl.exe
WindowsMedia11-KB936782-x86-ITA.exe
windowsmedia11-kb939209-x86-intl.exe
WindowsMedia11-KB939683-x86-ITA.exe
windowsmedia11-kb942264-x86-intl.exe
windowsmedia11-kb944110-x86-intl.exe
WindowsMedia6-KB925398-v2-x86-ITA.exe


...the rest of the critical hotfixes and IE7



thanks

Question about Wmp.inf line

Hi Boogy,

I looked into the Wmp.inf as modified by your slipstreamer. It has the following two lines:


I removed the first one (with Software\Classes\Software) and that had no effect on the results.
-I think it can be removed, not urgent, but maybe for the next revision .

ok dutchmate i will look into it....

ddead
what source do u use? cause i see xp sp1....also please tell me exactly what u do and also attach your nlite preset (dont copy/paste).

the folder name says SP1 because it's the label of the CD that it was copied from, but the content of the folder were updated to SP2...

here is what I remember I did:

-copied Italian xp sp1 cd to hard disk
-slipstreamed SP2 and hotfixes listed above (using nlite 1.4.1)
-tried to slipstream WMP11 to the updated xp folder and got the error message.

unfortunately I don't have any more info because I made a new nlited CD without WMP11 and formatted the computer
but I can try to reproduce the error if necessary

1st time using your integrator and I ran into a problem. In the past just used your wmp11 addon within nLite. I have winxp pro sp2 with updates. Ran nLite 1.4.1.0 1st (been using 2+yrs.) and then I started WMP11Slipstreamer v0.96. If this is successfull then I was planning on integrating driverpacks.net MassStorage or others if room to fit on a CD-RW.
Here is the bug report:

---------------------
WMP11Slipstreamer v0.96

Epsilon.IO.Archival+ArchiveProcessException: An error occurred while extracting files from "System.Byte[]" ---> System.IO.IOException: The process cannot access the file 'D:\xp_Pro-from T31_For driverpack Integration_T21_12-29-07\i386\wmp11temp\hotfixExtractTemp1797078541\LegitLibM.dll' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)
at System.IO.File.OpenFile(String path, FileAccess access, SafeFileHandle& handle)
at System.IO.File.SetLastWriteTimeUtc(String path, DateTime lastWriteTimeUtc)
at System.IO.File.SetLastWriteTime(String path, DateTime lastWriteTime)
at Epsilon.IO.Compression.CabDecompressor.decompInstance_NotifyCloseFile(Object sender, NotifyEventArgs e)
at Mischel.CabDotNet.DcmpRoutine.OnNotifyCloseFile(NotifyEventArgs e)
at Mischel.CabDotNet.DcmpRoutine.NotifyCallback(FdiNotificationType fdint, FdiNotification fdin)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, Int32 flags, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, IntPtr userData)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, Object userData)
at Mischel.CabDotNet.DcmpRoutine.ExtractFiles(String cabinetFullPath)
at Epsilon.IO.Compression.CabDecompressor.ExtractFiles(String destFolder)
at Epsilon.IO.Archival.NativeCabinetExtract(Byte[] data, String destinationFolder)
--- End of inner exception stack trace ---
at Epsilon.IO.Archival.throwArchiveException(String archiveName, ArchiveProcessOperation opType, Exception innerException)
at Epsilon.IO.Archival.NativeCabinetExtract(Byte[] data, String destinationFolder)
at WMP11Slipstreamer.Backend.NativeExtractHotfix(String hotfixInstaller, String destinationPath)
at WMP11Slipstreamer.Backend.ExtractWMP11Installer()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)

Deleting "D:\xp_Pro-from T31_For driverpack Integration_T21_12-29-07\i386\wmp11temp"... Done!

The source being modified has not been damaged.
All changes have been successfully reverted.
--------------
Hope this helps
By the way anyone else know anything about this error? Thanks