thx to microsoft that is the problem in detecting the encoding of text in txtsetup.sif....
till now we didnt succed to make it work right ...but we are working on it....
toto try us-english not british .......
Full Version: [RELEASE] Boooggy's WMP 11 direct integration solution
I've just tried the us-english setting trick.
It failed again...
I simply tried with nlite (1.3rc3) and ms wmp11 setup file.
It seems to integrate fine and the resulting txtsetup.sif file seems to be ok.
I have not yet tested the iso...
What is actually the main difference between integrating wmp11 with nlite (using the ms setup file, not any pre-made addon file) and using your slipstreamer ? Is there a genuine validation problem with nlite (eg. win xp should be validated before opening the first session...) ?
I will give it a try (nlite + ms wmp11 setup file), just for test purposes
*** a few minutes later ***
of course, it didn't work : many errors occured during the win xp setup process.
I now know that nLite can't simply slipstream ms wmp11 setup file
So, waiting for a better solution, I will use the SVCPACK method to install wmp11 (Thanks to AlBundy33)
It failed again...
I simply tried with nlite (1.3rc3) and ms wmp11 setup file.
It seems to integrate fine and the resulting txtsetup.sif file seems to be ok.
I have not yet tested the iso...
What is actually the main difference between integrating wmp11 with nlite (using the ms setup file, not any pre-made addon file) and using your slipstreamer ? Is there a genuine validation problem with nlite (eg. win xp should be validated before opening the first session...) ?
I will give it a try (nlite + ms wmp11 setup file), just for test purposes
*** a few minutes later ***
of course, it didn't work : many errors occured during the win xp setup process.
I now know that nLite can't simply slipstream ms wmp11 setup file
So, waiting for a better solution, I will use the SVCPACK method to install wmp11 (Thanks to AlBundy33)
CODE
"wmp11-windowsxp-x86-FR-FR.exe /Q:A /C:""setup_wm.exe /Q /R:N /NoMigrate /P:#e /DisallowSystemRestore"""
nlite doesnt integrate wmp setup....
and toto try the slipstreamer now...made some modifications and hope it will work now.
and toto try the slipstreamer now...made some modifications and hope it will work now.
i tested with xp french and its working fine.....
Well done !
I've just tested the new version and it seems to work like a charm.
No more "french" characters missing.
I'll try to make an iso in order to do a final test.
I'll keep you advised.
Thanks
glad to hear toto.....
hi boooggy! just wanted to share that using your wmp slipstreamer was a walk in the park ... & i didn't have any problem slipstreaming it in my SOURCE via HFSLIP 
... just 1 comment though, i opted for custom icon (the red one) but it didn't come out as like that on the created desktop shortcut ... i'd love to have a different icon though ... well, anyways what's important was being able to successfully slipstream wmp11 ... thanks!
... just 1 comment though, i opted for custom icon (the red one) but it didn't come out as like that on the created desktop shortcut ... i'd love to have a different icon though ... well, anyways what's important was being able to successfully slipstream wmp11 ... thanks!
updated both addons with
kb928788
kb929399
kb929773
kb931756
kiki
i dont know what red icon u are talking.....there are only 2 custom icon: vista wmp 11 icon and my icon .....none of them are red......
kb928788
kb929399
kb929773
kb931756
kiki
i dont know what red icon u are talking.....there are only 2 custom icon: vista wmp 11 icon and my icon .....none of them are red......
QUOTE (boooggy @ Mar 5 2007, 12:47 AM) 
updated both addons with
kb928788
kb929399
kb929773
kb931756
kiki
i dont know what red icon u are talking.....there are only 2 custom icon: vista wmp 11 icon and my icon .....none of them are red......
it's vista wmp 11 icon with red background on the white play button kb928788
kb929399
kb929773
kb931756
kiki
i dont know what red icon u are talking.....there are only 2 custom icon: vista wmp 11 icon and my icon .....none of them are red......
boooggy, would the updates you mentioned above be already included when using the slipstreamer? thanks!
btw, in relation to the post above, if i were to use slipstreamer (& i'd assume KBs aforementioned have not been integrated to it yet), do i need to download each hf (including non-public ones? have tried searching for it from xable's site but i couldn't find these or perhaps, i didn't search well enough) ... thanks!
or perhaps, i didn't search well enough) ... thanks!
kb931756 is the only one that is not included in the slipstreamer yet. as for other fixes for wmp 11 .....there are only this 4 that m$ released till today. also there are no unofficial ones yet.
thanks for the clarif boooggy! would the slipstreamer offer an option to integrate these HFs (or even newer win media related HFs? it would be a regular work for you to always create newer vers of slipstreamer if the above wouldn't be added as an option ... oh well, it's your call boooggy! i'll be happy to use a newer ver anyways ... thanks!
would the slipstreamer offer an option to integrate these HFs (or even newer win media related HFs? it would be a regular work for you to always create newer vers of slipstreamer if the above wouldn't be added as an option ... oh well, it's your call boooggy! i'll be happy to use a newer ver anyways ... thanks!
Hi Boooggy, firstly i want to thank you for your great works! I've used all of them, the Wmp11 addons and also the Wmp11 Slipstreamer and every time they worked very well! So great job!!!
Now the bad thing... For my new nLited Windows (english Windows 2003 Sp1 Standard Edition) i want to use your Wmp11 Slipstreamer. I've already used it (version 0.3) for my last test and it worked so good but now that i'm trying to close my project with your new 0.62 version, when i click on the "Integrate" button i get this error:
If i click on the "Details" button it shows me this:
The system that i'm using now is a nLited english Windows XP Professional Sp2, but i've tried to use your slipstreamer also with a normal italian Windows XP Professional Sp2 but it doesn't work... My Win2k3 source is clean and not modified at all. I've tried with safe mode but nothing. I've searched on google trying to understand if that problem is caused by my computer and i've tried to resolve it by myself but without success... I think that it's too hard for my skills...
So, could you help me please? And sorry for the long post...
Thanks, byezzz
---SOLVED---
The error was caused by my Win2K3 source, that was clean from nLite but corrupted by some reason that i cannot understand (maybe copying error...). Now the slipstreamer works like a charm!!! Byezzz
Now the bad thing... For my new nLited Windows (english Windows 2003 Sp1 Standard Edition) i want to use your Wmp11 Slipstreamer. I've already used it (version 0.3) for my last test and it worked so good but now that i'm trying to close my project with your new 0.62 version, when i click on the "Integrate" button i get this error:
If i click on the "Details" button it shows me this:
CODE
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: startIndex
at System.Globalization.CompareInfo.IndexOf(String source, String value, Int32 startIndex, Int32 count, CompareOptions options)
at System.Globalization.CompareInfo.IndexOf(String source, String value, Int32 startIndex)
at WMP11Slipstreamer.MainGUI.checkEssentialFiles(String sFolder)
at WMP11Slipstreamer.MainGUI.DoTheIntegration()
at WMP11Slipstreamer.MainGUI.buttonIntegrate_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///F:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
WMP11Slipstreamer
Assembly Version: 0.0.6.2
Win32 Version: 0.0.6.2
CodeBase: file:///F:/Program%20Files/WMP11%20Slipstreamer/WMP11Slipstreamer.exe
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: startIndex
at System.Globalization.CompareInfo.IndexOf(String source, String value, Int32 startIndex, Int32 count, CompareOptions options)
at System.Globalization.CompareInfo.IndexOf(String source, String value, Int32 startIndex)
at WMP11Slipstreamer.MainGUI.checkEssentialFiles(String sFolder)
at WMP11Slipstreamer.MainGUI.DoTheIntegration()
at WMP11Slipstreamer.MainGUI.buttonIntegrate_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///F:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
WMP11Slipstreamer
Assembly Version: 0.0.6.2
Win32 Version: 0.0.6.2
CodeBase: file:///F:/Program%20Files/WMP11%20Slipstreamer/WMP11Slipstreamer.exe
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
The system that i'm using now is a nLited english Windows XP Professional Sp2, but i've tried to use your slipstreamer also with a normal italian Windows XP Professional Sp2 but it doesn't work... My Win2k3 source is clean and not modified at all. I've tried with safe mode but nothing. I've searched on google trying to understand if that problem is caused by my computer and i've tried to resolve it by myself but without success... I think that it's too hard for my skills...
So, could you help me please? And sorry for the long post...
Thanks, byezzz
---SOLVED---
The error was caused by my Win2K3 source, that was clean from nLite but corrupted by some reason that i cannot understand (maybe copying error...). Now the slipstreamer works like a charm!!! Byezzz
I get the same error Carillo Gallardo gets
Hello, I would like to know where to find the WMP10 slipstreamer (to use it with nlite like I did with the WMP11). I know it's old, but I need it and the official site is not available.
The reason I need it is because my father use to watch racing horses and can't connect using WMP11 but yes with WMP10
The problem is the WM11 runtimes, because if I uninstall the player and install WMP10, do not connect, but if I uninstall the 11 runtimes, reboot and open WMP10 can connect
strange!!! but if it were for me, I would use WMP11.
thanks in advance
The reason I need it is because my father use to watch racing horses and can't connect using WMP11 but yes with WMP10
The problem is the WM11 runtimes, because if I uninstall the player and install WMP10, do not connect, but if I uninstall the 11 runtimes, reboot and open WMP10 can connect
strange!!! but if it were for me, I would use WMP11.
thanks in advance
go to ryanvm's forum and u will find a wmp 10 addon there.
REMOVED
hi boooggy! in relation to posts 60 & 62, would it still be alright to slipstream some newer HFs (via HFSLIP or nLiye) not currently supported by the slipstreamer? thanks!
QUOTE (boooggy @ Mar 6 2007, 06:05 PM)
go to ryanvm's forum and u will find a wmp 10 addon there.
Thank you, I downloaded it
But I was waiting for a slipstreamer program like the WMP11 version but for WMP10. is it posible to get it somewhere else?
I used Wmp11 Slipstreamer 0.62 (in Tweaked mode and Custom Icon: Vista WMP11 Icon) and WMP11 Spanish (downloaded from Microsoft) and everything worked perfect.
The problem is when I create a new user account without Admin privileges, just a limited user account, I get this problem during the first boot and this user does not have WMP11 icons on QuickLaunch or Start Menu.
Translation: Error on the INF installation. Cause: Denied access.
Any ideas of what to do to solve it????
Thnx,
Annita
The problem is when I create a new user account without Admin privileges, just a limited user account, I get this problem during the first boot and this user does not have WMP11 icons on QuickLaunch or Start Menu.
Translation: Error on the INF installation. Cause: Denied access.
Any ideas of what to do to solve it????
Thnx,
Annita
annita by any chance did u use nlite?
Yes, but after doing the slipstream with your app...
Annita
Annita
The thing is that it only happens on Limited Users accounts and with Admins work perfect. On those Limited Users accounts they don't get the icons of Windows Media Player but if you create another a new one, every time for every Limited Users accounts the player works fine.
I also tried to put an Icon on the Default User\Start Menu and All Users\Start Menu but it get's erased when a new limited user account is created and this message comes up...
The cause is WMP11 for sure. I got a full image like this when a new limited user account is created and logon for first time:
Any ideas?
Thnx,
Annita
I also tried to put an Icon on the Default User\Start Menu and All Users\Start Menu but it get's erased when a new limited user account is created and this message comes up...
The cause is WMP11 for sure. I got a full image like this when a new limited user account is created and logon for first time:
Any ideas?
Thnx,
Annita
Some strange going's on with the intergrater, when i slipstream WMP11 Into Windows Server 2003, application compatibility mode is affected!!, apps that needed to be ran in XP compatabilty mode now fail where's before they used to work, from what i can tell the modes have shifted down, ie XP mode is now 2000, 98 is now 95 etc, when using the Addons its ok, a quick app to test with is this http://www.stud.ntnu.no/~skara/files/UsbRate.rar i use it for clocking the USB bus, just run it with XP compatibility mode, it runs fine on both SP1/SP2 2845, when intergrating WMP11 with the slipstreamer, it fails even in compatibility mode, saying "XP 32bit Only" xp mode usually bypasses and lets it run, so intergrator is messing some settings up someplace. another app i use which no longer works is Logitech's Setpoint (also needs XP Compat Mode on the installer) hope i have explained it well enough
Lemonzest.
Edit:looks like an nLite 1.3 problem.
Lemonzest.
Edit:looks like an nLite 1.3 problem.
Thanks booogy for keeping your addons up to date and not just the Integrator...
Ive been having wmp11 integrator troubles and the addon might help aleave my problem
Ive been having wmp11 integrator troubles and the addon might help aleave my problem
Any ideas of what is the problem I have and how to solve it???
Thnx,
Annita
Thnx,
Annita
yes anita....i have an idea....dont use nlite unattend page and please report.
i had same error as u have for other addons with nlite when i try to create limited users.
i had same error as u have for other addons with nlite when i try to create limited users.
I already did that....
I copied all of a WXP SP2 CD on a folder, slipstream WMP11 with your app and nothing else (no Win Updates, no other progs, nothing) and I still get the same error on limited user accounts...
Annita
I copied all of a WXP SP2 CD on a folder, slipstream WMP11 with your app and nothing else (no Win Updates, no other progs, nothing) and I still get the same error on limited user accounts...
Annita
Hey,
Use boooggy's add-on and RyanVM's Integrator - no issues here.
laze.
Use boooggy's add-on and RyanVM's Integrator - no issues here.
laze.
anita thx for finding this ...i confirm there is an error on limited users... will be fixed as soon as we can.
till then please contact me on pm
till then please contact me on pm
prathapml to be sincere i didnt think to make it work for x64.........but it seems that people start asking me about this...so i might start working on it soon.
I just want to update WM Format, is it safe to select WMP11 in nLite if I have integrated it with WMP11 Slipstreamer?
I also would like to know if there will be support for x64 xp?
QUOTE (Drakx @ Mar 20 2007, 02:55 AM)
I also would like to know if there will be support for x64 xp?
dont know yet....maybe....there are only few requests......
Here is a WMP11 icon I extracted from Windows Vista (should support 256 x 256):
Vista WMP11 Icon (256 x 256)
Hope this helps!
Vista WMP11 Icon (256 x 256)
Hope this helps!
I received this error while using the WMP11 Slipstreamer in Windows Vista Enterprise:
WMP11Slipstreamer.ArchiveMethods+ArchiveProcessException: An error occurred while creating "wmp11.cab" ---> System.ApplicationException: AddFile failed with code None
at Mischel.CabDotNet.CmpRoutine.AddFile(String filename, String nameInCab, Boolean execOnDecompress, FciCompression compressType)
at System.IO.Compression.CabCompressor.recursiveCompress(String fileOrFolderPath, String stripPrefix)
at System.IO.Compression.CabCompressor.CompressFiles(String sFolder, Boolean recursive, CompressorProgressCallback callbackMethod)
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetCreate(String cabinetPath, String sourceFolder, Boolean recursive, Boolean log, CompressorProgressCallback callback)
--- End of inner exception stack trace ---
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetCreate(String cabinetPath, String sourceFolder, Boolean recursive, Boolean log, CompressorProgressCallback callback)
at WMP11Slipstreamer.Backend.CompressFiles()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)
Deleting "E:\extra\xp\i386\wmp11temp"... Done!
The source being modified has not been damaged.
All changes have been successfully reverted.
WMP11Slipstreamer.ArchiveMethods+ArchiveProcessException: An error occurred while creating "wmp11.cab" ---> System.ApplicationException: AddFile failed with code None
at Mischel.CabDotNet.CmpRoutine.AddFile(String filename, String nameInCab, Boolean execOnDecompress, FciCompression compressType)
at System.IO.Compression.CabCompressor.recursiveCompress(String fileOrFolderPath, String stripPrefix)
at System.IO.Compression.CabCompressor.CompressFiles(String sFolder, Boolean recursive, CompressorProgressCallback callbackMethod)
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetCreate(String cabinetPath, String sourceFolder, Boolean recursive, Boolean log, CompressorProgressCallback callback)
--- End of inner exception stack trace ---
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetCreate(String cabinetPath, String sourceFolder, Boolean recursive, Boolean log, CompressorProgressCallback callback)
at WMP11Slipstreamer.Backend.CompressFiles()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)
Deleting "E:\extra\xp\i386\wmp11temp"... Done!
The source being modified has not been damaged.
All changes have been successfully reverted.
ya pat i know about that. u have to take the cabinet.dll from xp and put it in the same folder with slipstreamer.
addons updated: added kb932390 and kb933547.
also if anybody can offer me some hosting will be greatlly appreciated.......
addons updated: added kb932390 and kb933547.
also if anybody can offer me some hosting will be greatlly appreciated.......
Add me to the list of those who wants to slipstream to Windows x64. Thanks.
hello boooggy, thank you for the addon....
but have little problem with wmp11 well is not error or crashes... Well you know when you load a file music etc.. wmp11 pop out and plays right, and than you click on different file again and than wmp11 play the file you just open.. Well once wmp11 is open and I try to open different file instead playing the file I request just adds to the playlist so I have manually double click on the playlist to play the file I open, I didn't have to do that before so what I did was I create new xp cd without using your wmp11 addon and once I windows finish install. I install wmp11 manually by using microsoft installer and wmp11 didn't do that anymore... I use nlite and wmp11 addon 1.45.. what could this be?
but have little problem with wmp11 well is not error or crashes... Well you know when you load a file music etc.. wmp11 pop out and plays right, and than you click on different file again and than wmp11 play the file you just open.. Well once wmp11 is open and I try to open different file instead playing the file I request just adds to the playlist so I have manually double click on the playlist to play the file I open, I didn't have to do that before so what I did was I create new xp cd without using your wmp11 addon and once I windows finish install. I install wmp11 manually by using microsoft installer and wmp11 didn't do that anymore... I use nlite and wmp11 addon 1.45.. what could this be?
QUOTE (kenlau @ Mar 23 2007, 06:46 PM)
Add me to the list of those who wants to slipstream to Windows x64. Thanks.
dito...pls add support for xp x64
I'll ask again!
I just want to update WM Format, is it safe to select WMP11 in nLite if I have integrated it with WMP11 Slipstreamer?
I just want to update WM Format, is it safe to select WMP11 in nLite if I have integrated it with WMP11 Slipstreamer?
Hey,
What do you mean by 'update'?
laze.
What do you mean by 'update'?
laze.
@boooggy:
are there enough ppl asking for x64 wmp11 integration now?
are there enough ppl asking for x64 wmp11 integration now?
i guess there are .....but i just dont have the time yet.......
laze, nevermind
Hi boooggy,
I used your slipstream application with nLite and now I can't rip CD tracks with MP3, there's no MP3 format on the Rip CD options (only WMA and WAV). I can send you a screenshot if you want.
It seems the WMP11 slipstream utility removed the following registry entries:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Settings\MP3Encoding]
"LowRate"=dword:0001f400
"MediumRate"=dword:0002ee00
"MediumHighRate"=dword:0003e800
"HighRate"=dword:0004e200
"PreferredCodecName"="mp3"
"PreferredCodecPath"="C:\\WINDOWS\\system32\\l3codecp.acm"
I copied the entries from an original WMP11 installation and now it works as expected.
Could you add this back on your app?
Is there a way to specify nLite which mode (vanilla or tweaked) should the splipstream work? Which one is used by default?
I can't change the mode from nLite
Also where is the WMP11 slipstream changelog? I'm trying to get the list of applied patches and fixes, searched the forums but couldn't find a complete list.
Thanks.
I used your slipstream application with nLite and now I can't rip CD tracks with MP3, there's no MP3 format on the Rip CD options (only WMA and WAV). I can send you a screenshot if you want.
It seems the WMP11 slipstream utility removed the following registry entries:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Settings\MP3Encoding]
"LowRate"=dword:0001f400
"MediumRate"=dword:0002ee00
"MediumHighRate"=dword:0003e800
"HighRate"=dword:0004e200
"PreferredCodecName"="mp3"
"PreferredCodecPath"="C:\\WINDOWS\\system32\\l3codecp.acm"
I copied the entries from an original WMP11 installation and now it works as expected.
Could you add this back on your app?
Is there a way to specify nLite which mode (vanilla or tweaked) should the splipstream work? Which one is used by default?
I can't change the mode from nLite
Also where is the WMP11 slipstream changelog? I'm trying to get the list of applied patches and fixes, searched the forums but couldn't find a complete list.
Thanks.
Hi booogy i encounter this error while trying to slipstream wmp11 to my xpsp2. Im running nlite under winxp 64bit right now.
WMP11Slipstreamer.ArchiveMethods+ArchiveProcessException: An error occurred while extracting "C:\Documents and Settings\user\Desktop\wxpsp2\i386\OEMBIOS.DA_". ---> System.ArgumentOutOfRangeException: Year, Month, and Day parameters describe an un-representable DateTime.
at System.DateTime.DateToTicks(Int32 year, Int32 month, Int32 day)
at System.DateTime..ctor(Int32 year, Int32 month, Int32 day, Int32 hour, Int32 minute, Int32 second)
at Mischel.CabDotNet.FCntl.DateTimeFromDosDateTime(Int16 date, Int16 time)
at System.IO.Compression.CabDecompressor.decompInstance_NotifyCloseFile(Object sender, NotifyEventArgs e)
at Mischel.CabDotNet.DcmpRoutine.NotifyCallback(FdiNotificationType fdint, FdiNotification fdin)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, Int32 flags, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, IntPtr userData)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, Object userData)
at Mischel.CabDotNet.DcmpRoutine.ExtractFiles(String cabinetFullPath)
at System.IO.Compression.CabDecompressor.ExtractFiles(String destFolder, DecompressorProgressCallback delegateMethod)
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetExtract(String cabFile, String destinationDirectory, Boolean log, DecompressorProgressCallback callback)
--- End of inner exception stack trace ---
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetExtract(String cabFile, String destinationDirectory, Boolean log, DecompressorProgressCallback callback)
at WMP11Slipstreamer.Backend.DetectSourceType()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)
Deleting "C:\Documents and Settings\user\Desktop\wxpsp2\i386\wmp11temp"... Done!
The source being modified has not been damaged.
All changes have been successfully reverted.
WMP11Slipstreamer.ArchiveMethods+ArchiveProcessException: An error occurred while extracting "C:\Documents and Settings\user\Desktop\wxpsp2\i386\OEMBIOS.DA_". ---> System.ArgumentOutOfRangeException: Year, Month, and Day parameters describe an un-representable DateTime.
at System.DateTime.DateToTicks(Int32 year, Int32 month, Int32 day)
at System.DateTime..ctor(Int32 year, Int32 month, Int32 day, Int32 hour, Int32 minute, Int32 second)
at Mischel.CabDotNet.FCntl.DateTimeFromDosDateTime(Int16 date, Int16 time)
at System.IO.Compression.CabDecompressor.decompInstance_NotifyCloseFile(Object sender, NotifyEventArgs e)
at Mischel.CabDotNet.DcmpRoutine.NotifyCallback(FdiNotificationType fdint, FdiNotification fdin)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, Int32 flags, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, IntPtr userData)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, Object userData)
at Mischel.CabDotNet.DcmpRoutine.ExtractFiles(String cabinetFullPath)
at System.IO.Compression.CabDecompressor.ExtractFiles(String destFolder, DecompressorProgressCallback delegateMethod)
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetExtract(String cabFile, String destinationDirectory, Boolean log, DecompressorProgressCallback callback)
--- End of inner exception stack trace ---
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetExtract(String cabFile, String destinationDirectory, Boolean log, DecompressorProgressCallback callback)
at WMP11Slipstreamer.Backend.DetectSourceType()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)
Deleting "C:\Documents and Settings\user\Desktop\wxpsp2\i386\wmp11temp"... Done!
The source being modified has not been damaged.
All changes have been successfully reverted.
Hi booogy i encounter this error while trying to slipstream wmp11 to my xpsp2. Im running nlite under winxp 64bit right now.
QUOTE
WMP11Slipstreamer.ArchiveMethods+ArchiveProcessException: An error occurred while extracting "C:\Documents and Settings\user\Desktop\wxpsp2\i386\OEMBIOS.DA_". ---> System.ArgumentOutOfRangeException: Year, Month, and Day parameters describe an un-representable DateTime.
at System.DateTime.DateToTicks(Int32 year, Int32 month, Int32 day)
at System.DateTime..ctor(Int32 year, Int32 month, Int32 day, Int32 hour, Int32 minute, Int32 second)
at Mischel.CabDotNet.FCntl.DateTimeFromDosDateTime(Int16 date, Int16 time)
at System.IO.Compression.CabDecompressor.decompInstance_NotifyCloseFile(Object sender, NotifyEventArgs e)
at Mischel.CabDotNet.DcmpRoutine.NotifyCallback(FdiNotificationType fdint, FdiNotification fdin)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, Int32 flags, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, IntPtr userData)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, Object userData)
at Mischel.CabDotNet.DcmpRoutine.ExtractFiles(String cabinetFullPath)
at System.IO.Compression.CabDecompressor.ExtractFiles(String destFolder, DecompressorProgressCallback delegateMethod)
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetExtract(String cabFile, String destinationDirectory, Boolean log, DecompressorProgressCallback callback)
--- End of inner exception stack trace ---
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetExtract(String cabFile, String destinationDirectory, Boolean log, DecompressorProgressCallback callback)
at WMP11Slipstreamer.Backend.DetectSourceType()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)
Deleting "C:\Documents and Settings\user\Desktop\wxpsp2\i386\wmp11temp"... Done!
The source being modified has not been damaged.
All changes have been successfully reverted.
at System.DateTime.DateToTicks(Int32 year, Int32 month, Int32 day)
at System.DateTime..ctor(Int32 year, Int32 month, Int32 day, Int32 hour, Int32 minute, Int32 second)
at Mischel.CabDotNet.FCntl.DateTimeFromDosDateTime(Int16 date, Int16 time)
at System.IO.Compression.CabDecompressor.decompInstance_NotifyCloseFile(Object sender, NotifyEventArgs e)
at Mischel.CabDotNet.DcmpRoutine.NotifyCallback(FdiNotificationType fdint, FdiNotification fdin)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, Int32 flags, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, IntPtr userData)
at Mischel.CabDotNet.CabSdk.FdiCopy(IntPtr hfdi, String cabinetName, String cabinetPath, FdiNotifyDelegate fnNotify, FdiDecryptDelegate fnDecrypt, Object userData)
at Mischel.CabDotNet.DcmpRoutine.ExtractFiles(String cabinetFullPath)
at System.IO.Compression.CabDecompressor.ExtractFiles(String destFolder, DecompressorProgressCallback delegateMethod)
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetExtract(String cabFile, String destinationDirectory, Boolean log, DecompressorProgressCallback callback)
--- End of inner exception stack trace ---
at WMP11Slipstreamer.ArchiveMethods.NativeCabinetExtract(String cabFile, String destinationDirectory, Boolean log, DecompressorProgressCallback callback)
at WMP11Slipstreamer.Backend.DetectSourceType()
at WMP11Slipstreamer.MainGUI.workerMethod(Object addonSettings)
Deleting "C:\Documents and Settings\user\Desktop\wxpsp2\i386\wmp11temp"... Done!
The source being modified has not been damaged.
All changes have been successfully reverted.
download links and site got back on
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.