Tostis

Member
  • Content count

    9
  • Joined

  • Last visited

Community Reputation

2 Neutral

About Tostis

Contact Methods

  • Website URL
    http://
  1. Is there a way to force windows to store swap file on usb external hdd?
  2. doh! I didn't know there was already a tutorial non the web thanks for the solution
  3. i followed this guide http://ngine.de/article/id/8/ 1) install Windows 7 into VMWare Workstation 2) make an image of the partition with program like Paragon Partition Manager 3) with Paragon cd (found in Paragon Program files) restore that image on external usb hd 4) start pc with external usb hd but it will not work 5) start pc with Windows 7 dvd and try all recovery possibilities to add a line in bcd and fix mbr 6) start pc with external usb hd but it will crash with BSOD 7) start pc with Ultimate Boot CD for Windows then launch Regedit(remote), select Windows 7 root folder 8) modify windows registry setting Group = System Reserved and Start = 0. Registry should be like this HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","DisplayName",0x00000000,"USB Mass Storage Driver" HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","ErrorControl",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","Group",0x00000000,"System Reserved" HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","ImagePath",0x00020000,"system32\DRIVERS\USBSTOR.SYS" HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","Start",0x00010001,0 HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","Type",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","DisplayName",0x00000000,"USB 2.0 Enhanced Host Controller Miniport Driver" HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","ErrorControl",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","Group",0x00000000,"System Reserved" HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","ImagePath",0x00020000,"system32\DRIVERS\usbehci.sys" HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","Start",0x00010001,0 HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","Type",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","DisplayName",0x00000000,"USB2 Enabled Hub" HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","ErrorControl",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","Group",0x00000000,"System Reserved" HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","ImagePath",0x00020000,"system32\DRIVERS\usbhub.sys" HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","Start",0x00010001,0 HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","Type",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","DisplayName",0x00000000,"Microsoft USB Universal Host Controller Miniport Driver" HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","ErrorControl",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","Group",0x00000000,"System Reserved" HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","ImagePath",0x00020000,"system32\DRIVERS\usbuhci.sys" HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","Start",0x00010001,0 HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","Type",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","DisplayName",0x00000000,"Microsoft USB Open Host Controller Miniport Driver" HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","ErrorControl",0x00010001,1 HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","Group",0x00000000,"System Reserved" HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","ImagePath",0x00020000,"system32\DRIVERS\usbohci.sys" HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","Start",0x00010001,0 HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","Type",0x00010001,1 9) restart pc and it will work 9bis) If you restart because of hardware changes, it will not work so you have to repeat steps 7-8-9. Maybe you should (i have not tested it) redo steps 7-8 before restart Note: you can use similar programs like Partition Magic, VirtualBox, any WinPE ecc EDIT: i have just found PWBoot Project This post has been promoted to an article
  4. i made your same steps for w2k + slipstreamed sp2 but it stuks at "setup is verifying your hardware..." can you attach your cracked setupldr.bin? UPDATE: solved putting boot folder at the beginning of dvd
  5. i applied the crack tor setupldr.bin of windows 2003 sp2 but it doesn't work. does anyone managed to work? UPDATE: solved putting boot folder at the beginning of dvd
  6. i solved porting my cdshell menu to a new isolinux one i rather explode the iso and make apps visible than place the whole iso and call it via diskemu
  7. ubcd 4.11 now uses isolinux instead of cdshell. you should call "isolinux" from cdshell.ini. i just tryed but the ubcd menu cannot be browsed
  8. see here
  9. i uploaded here the outdated pdf and the mht of every page found in archive.org B)