confused_ka

Member
  • Content count

    11
  • Joined

  • Last visited

Community Reputation

0 Neutral

About confused_ka

  1. Hello, I am using Windows PE 4.0 with built in powershell to deploy Windows Server 2008 R2. Basicly I am booting Windows PE 4.0 with all the neccessary drivers into the RAM Disk and from there on I get the unattended files and sources for Windows 2008 Server R2 and I will start the install process withhin the PE. With Windows PE 3.1 I had 0 problems but now with PE 4.0 after the end of the Installation during the PE Part I get the following Error message "Installation cannot continue because a required driver could not be installed". Ofc I browsed thru the panther logs and found out it was the areca mass storage driver. The logs are showing me this: 2013-01-11 15:15:49, Info [0x0a0024] UI progress task ProgressInfo\CBSServicing : EndProgress 2013-01-11 15:15:49, Info [0x0602a4] IBS CallBack_AddDriverPackageIntoDriverStore:Driver package path is [X:\windows\System32\DriverStore\FileRepository\oemsetup.inf_amd64_290ae086395dab44\oemsetup.inf] 2013-01-11 15:15:49, Info [0x0602b2] IBS CallBack_AddDriverPackageIntoDriverStore:Driver package is [critical] 2013-01-11 15:15:49, Info IBS AddDriverPackageIntoDriverStore:Driver package path is [X:\windows\System32\DriverStore\FileRepository\oemsetup.inf_amd64_290ae086395dab44\oemsetup.inf] 2013-01-11 15:15:49, Info IBS AddDriverPackageIntoDriverStore:Image architecture is [0x9] 2013-01-11 15:15:49, Info IBS AddDriverPackageIntoDriverStore:System root is [C:\Windows] 2013-01-11 15:15:49, Info IBS AddDriverPackageIntoDriverStore:System drive is [C:\] 2013-01-11 15:16:11, Warning [0x0602b1] IBS AddDriverPackageIntoDriverStore:Failed to add the driver package [X:\windows\System32\DriverStore\FileRepository\oemsetup.inf_amd64_290ae086395dab44\oemsetup.inf] into driver store. Error code is [0x80070032] 2013-01-11 15:16:11, Error [0x0602a9] IBS CallBack_AddDriverPackageIntoDriverStore:Failed to install the driver package [X:\windows\System32\DriverStore\FileRepository\oemsetup.inf_amd64_290ae086395dab44\oemsetup.inf]. Driver package is [Critical]. Error code is [0x32][gle=0x00000032] 2013-01-11 15:16:11, Error [0x0602ab] IBS CallBack_AddDriverPackageIntoDriverStore:An error occurred while installing the driver package [] offline GLE is [0x32][gle=0x00000032] 2013-01-11 15:16:11, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows installation cannot continue because a required driver could not be installed.] The driver itself works fine within the PE. Windows PE 4.0 can access the harddisks and the driver gets initialized properly. The same driver works with PE 3.1 and the unattended installation. I also tried to switch the driver with another version but still same error. Anybody know what those error codes are standing for? Error code is [0x80070032] or Error code is [0x32][gle=0x00000032]. Regards, Phil
  2. Thank you for the info. Looks good!
  3. Hi, is there a way that after the unattended setup, I can automaticly download and install unattended all missing updates? Like trigger it via a command line tool? At the moment I am slipstreaming them offline with dism. So they get applied during the offlince servicing phase. However when I applied the latest RDP hotfix, my unattended setup stopped during the offline servicing phase cause it couldnt apply a package (the hotfix I suppose, did not tell me any readable name in the panther logs).
  4. The multiple BCD is a cool thing, but did any of you guys managed to add LOCALBOOT as a default entry? I dont know how to set it to localboot so when there is no user interaction and the timeout is done, it should boot to local instead of booting a windows PE image....(like the first one in order...) anyone knows a solution?
  5. Hi, i am using BCD for my PXE Environment in order to have 2 multiboot windows pe 2.1 (32 and 64 bit). Everything works besides that I dont know how I add localboot as default boot to the BCD... When the timer runs down it boots the Windows PE... my Configuration looks like this bcdedit -store c:\BCD -enum all Windows Boot Manager -------------------- identifier {bootmgr} description W.H.A.T. BootManager default {default} displayorder {625f9b00-ec81-11dd-b5f9-0019b9464270} {77c871b0-ebc3-11dd-b5f9-0019b9464270} timeout 10 Windows Boot Loader ------------------- identifier {625f9b00-ec81-11dd-b5f9-0019b9464270} device ramdisk=[boot]\Boot\boot32.wim,{ramdiskoptions} description Windows PE 2.1 (x86) osdevice ramdisk=[boot]\Boot\boot32.wim,{ramdiskoptions} systemroot \Windows detecthal Yes winpe Yes Windows Boot Loader ------------------- identifier {77c871b0-ebc3-11dd-b5f9-0019b9464270} device ramdisk=[boot]\boot\boot.wim,{ramdiskoptions} description Windows PE 2.1 (x64) osdevice ramdisk=[boot]\boot\boot.wim,{ramdiskoptions} systemroot \Windows detecthal Yes winpe Yes Setup Ramdisk Options --------------------- identifier {ramdiskoptions} description 32 Bit PE 2.1 OBEN, 64 Bit PE 2.1 UNTEN ramdisksdidevice boot ramdisksdipath \boot\boot.sdi The question is how do I add an GENERIC localboot entry as default? I only have the choice to make a default vista/2008 boot or {ntdlr} for xp/2003 but we have all kinds of servers (2003 and 2008) so I need a generic localboot entry... Anyone an idea?
  6. Hi, I am looking for a guide to pxe boot 32 or 64 bit Windows pe 2.1. I am using pxelinux for multiboot but due to the hardcoded pxeboot.0 I dont get how to add another Windows PE 2.1 bootimage into it. Since it hardlinks to boot.wim etc... Is there a way to dual boot Windows 2.1 PE (32 or 64 Bit)? Regards, Philipp
  7. Hi, looking for a tool which erases the first megabyte (size variable) of a hardisk with zeros. Kinda what DD can do under Linux. Is there a free one for xp/vista x64? Regards, Phil
  8. or asking in another way, is it possible to slipstream dot.net 3.5 sp1 offline to my install.wim? I heard about the pkgmgr.exe and the /iu switch. But I did not figured out yet how to slipstream the .net 3.5 sp1 as an official package or feature. Any ideas are appreciated Regards, Phil
  9. Hi I am trieng to install dot.net 3.5 sp1 unattended in audituser pass with a sync command. For some reason it doesnt get applied however the audit passes are applied. I simply did it with a cmd /c c:\Install\dotfx35.exe /q sync command. Is there an error log where I can look what went wrong? Regards, Philipp
  10. Hi, thanks for you advise but I checked on the chipset of the Mainboard and its an Nvidia MCP78B. I have only found SATA Raid Drivers with this package, not standalone SATA drivers. I dont think the nforce drivers are that uptodate since the mainboard chipset drivers are from 3/2008. I get the error during the textmode setup when you can press f6 to add new SATA drivers. If I use teh same drivers via floppy i dont get the bluescreen at all. I have also put the drivers to the "OemPnPDriversPath" written in the unattend.ini, still no success. Seems kinda strange... Regards, Philipp
  11. Hello I am trieng to embedd a mass storage driver for a windows server 2003 (64 bit) unattend installation. I am using the txtsetup.oem method. I have embedded alot of mass storage drivers in this way and never had any problems, but this one seems strange. Here is my txtsetup.oem [Disks] d1 = "NVIDIA RAID DRIVER (SCSI) disk 1",\disk1,\ [Defaults] ;scsi = RAIDCLASS [scsi] RAIDCLASS = "NVIDIA RAID Driver (required)" BUSDRV = "NVIDIA nForce Storage Controller (required)" [Files.scsi.RAIDCLASS] driver = d1,nvrd64.sys,RAIDCLASS inf = d1,nvrd64.inf catalog = d1,nvraid.cat dll = d1,nvraidco.dll dll = d1,NvRCoENU.dll [Files.scsi.BUSDRV] driver = d1,nvgts64.sys,BUSDRV inf = d1, nvrd64.inf catalog = d1, nvraid.cat dll = d1,nvraidco.dll dll = d1,NvRCoENU.dll [Config.RAIDCLASS] [Config.BUSDRV] value = parameters\PnpInterface,5,REG_DWORD,1 [HardwareIds.scsi.RAIDCLASS] id = "SCSI\NVIDIA__Raid_Disk________","nvrd64" id = "SCSI\__NVIDIA_______Raid_Disk","nvrd64" id = "SCSI\NVIDIA__Raid_Disk_20_____","nvrd64" id = "SCSI\__NVIDIA____Raid_Disk_20","nvrd64" id = "*_NVRAIDBUS","nvrd64" id = "*NVRAIDBUS","nvrd64" id = "*NVRAID20","nvrd64" [HardwareIds.scsi.BUSDRV] id = "PCI\VEN_10DE&DEV_0036", "nvgts64" id = "PCI\VEN_10DE&DEV_003E", "nvgts64" id = "PCI\VEN_10DE&DEV_0054", "nvgts64" id = "PCI\VEN_10DE&DEV_0055", "nvgts64" id = "PCI\VEN_10DE&DEV_0266", "nvgts64" id = "PCI\VEN_10DE&DEV_0267", "nvgts64" id = "PCI\VEN_10DE&DEV_037E", "nvgts64" id = "PCI\VEN_10DE&DEV_037F", "nvgts64" id = "PCI\VEN_10DE&DEV_036F", "nvgts64" id = "PCI\VEN_10DE&DEV_03F6", "nvgts64" id = "PCI\VEN_10DE&DEV_03F7", "nvgts64" id = "PCI\VEN_10DE&DEV_03E7", "nvgts64" id = "PCI\VEN_10DE&DEV_044C", "nvgts64" id = "PCI\VEN_10DE&DEV_0558", "nvgts64" id = "PCI\VEN_10DE&DEV_0559", "nvgts64" id = "PCI\VEN_10DE&DEV_055A", "nvgts64" id = "PCI\VEN_10DE&DEV_07F8", "nvgts64" id = "PCI\VEN_10DE&DEV_07F9", "nvgts64" id = "PCI\VEN_10DE&DEV_07FA", "nvgts64" id = "PCI\VEN_10DE&DEV_07FB", "nvgts64" id = "PCI\VEN_10DE&DEV_0AD9", "nvgts64" id = "PCI\VEN_10DE&DEV_0AD8", "nvgts64" id = "PCI\VEN_10DE&DEV_0ABD", "nvgts64" id = "PCI\VEN_10DE&DEV_0ABC", "nvgts64" And the here is the unattend.txt (well the most relevant parts): ... OEMPreinstall=Yes ... [MassStorageDrivers] "NVIDIA RAID Driver (required)" = OEM "NVIDIA nForce Storage Controller (required)" = OEM [OEMBootFiles] nvgts64.sys disk1 nvide.nvu nvraid.cat nvraidco.dll NvRCoEnu.dll nvrd64.inf nvrd64.sys txtsetup.oem ... The problem that I am getting is that driver works when I enable the NVRAID in the Bios. If I use the NVraid just as a Storage Controller without raid Function (BUS DRV) I get a Bluescreen (Stop 0x07b). If I disable the raid and use the disk method with F6 during the setup with exact the same files like the one in my unattend installation I dont get a bluescreen. Do I get this right?: [scsi] RAIDCLASS = "NVIDIA RAID Driver (required)" --> the driver for the raid, when its enabled via bios BUSDRV = "NVIDIA nForce Storage Controller (required)" --> the driver for just a storage controller if I disable the raid function So my theory is that for some reason if i leave the raid disabled windows setup does not care and still takes the raid driver instead of the second one. Leaving the Raid enabled isnt a solution for me, well for my boss The mainboard is an FSC D2721h with on board NVRAID. Thank you for your help in advance. Regards, Philipp