Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble

MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically. 

Orfeo85

Member
  • Content count

    3
  • Donations

    $0.00 
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Orfeo85

  • Rank
    Banned
  1. Hi, I had followed the guide to fix the -busy error... seems to be all OK. The drive now was recognized by the bios but my raid0 configuration doesn't work... It's normal, or i can recover it?? A strange thing that apen when i do the m command... F3 T>/2 F3 2>Z Spin Down Complete Elapsed Time 0.140 msecs F3 2>U Spin Up Complete Elapsed Time 6.883 secs F3 2>/1 F3 1>N1 F3 1> F3 T>m0,2,2,,,,,22 Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewr ite Retries = 00C8 User Partition Format Successful - Elapsed Time 0 mins 00 secs The partition format takes under 5 seconds... is too fast, or is the raid that makes this?? Tnx _FLAVIO_
  2. In the italian translation there are already explained with this tricks... but i don't have read it before... CIAO!
  3. Hi to all... My HD on a raid0 array is affected by the busy issues, and for a week I tried to contact seagate to have helpful information on restoring e data backup my HD with no response... until i read the gradius post!!! Now i have ordered all the cable and converter to restore the drive, but i want to simplify the operation of removing and reistalling the pcb on the hd. The only connection between the PCB and the HD is within the 3 pin?? To semplify the operation of reinstalling the PCB and be careful to don't make any cort-circuit, i suggest to unscrew until a doublepiece of insulanting-tape can be placed to isolate the pins. then re-screw to make the pcb more stable and follow the guide. When yuo need to establish the connection between the pcb and the hd simple pull the tape out. I think this way is riskless than the original!! I hope that my English is understandable, however i'll make some pics to explain what i'm doing!!! Bye!!!
×