MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically.
Hi For guys who don't have the Gradius pics, here is a french board where someone did a french traduction of the all process, and put some pics. See in the middle of the page : http://220.127.116.11/search?q=cache:-QxDa...lient=firefox-a
Hi Gradius2, THANKS x 1000 !!! I have a Maxtor DiamondMax 22 500 Gb SMT3500320AS wich had the BSY error. I have followed exactly your tutorial and all is ok now !!! I didn't need to connect ground on the PCB. I didn't need to do the G list optional. I was blocked after the commande : F3 T>m0,2,2,,,,,22 (non response for 30 minutes). So I power off the Sata, wait 10 seconds, power on, wait 30 seconds, ctrl Z, and F3 T>m0,2,2,,,,,22 again : after 2 minutes, the good answer on the terminal !!!! I must say that on the Maxtor rx goes to rx and tx to the tx. :thumbup :thumbup Thanks a lot for all this work, you(re the best ! Nicolas
Hi I have a Maxtor Diamondmax 22 STM3500320AS 500 Go wich seems to have the BSY error. I bought an RS232/TTL adapter that I wait for and also the other stuff. Since my english is not 100% sure, I don't want to miss something before I start to unblock the HDD. When Gradius2 says "connect the power supply to Hard drive circuit board", is it the sata power ? Thanks