gallyfa

Member
  • Content count

    8
  • Joined

  • Last visited

Community Reputation

0 Neutral

About gallyfa

  • Birthday
  1. Have you tryed to upgrade the firmware? In my case, after recovery with BSY metod, the hard drive was fully working... Download appropriate firmware and upgrade it. http://seagate.custkb.com/seagate/crm/self...&NewLang=en I don't know if you can upgrade via USB... Try to connect HD direct to motherboard. Good luck
  2. Yes, it work, I used a compatible cable. No battery, only molex (hd power connector) and nokia usb cable.
  3. a) Trunk the CA-42 nokia near (not at the) the end of the pop port B) For connecting the nokia cable you must check wich wire is connected with pop-port pin 1,2 and 3 (with a tester) In your cable the colours of wire can be another.... then you must connect the correspondent coloured wire (from wire with the usb) at the hard disk pin: pin 1 wire to gnd pin 2 wire to TX pin 3 wire to RX Report from site http://www.overclock.net/hard-drives-stora...e-fix-pics.html It's all.
  4. I have fix the drive! I have a Maxtor STM3500320AS 500Gb Firmware MX15 not recognized by BIOS, so I think BSY problem. Use this Guide for BSY I have used Nokia cable CA-42, and hyperterminal. If your motherboard support only sataI 150Mbps remember to set the bringe between the tho pin after you have fixed the drive. Tomorow I will post how use CA-42 with photo. I think that the use of nokia cable CA-42 is the most cheap solution for all, it's simply and fast. Thank you at all people for the support
  5. Please help me, I have read all the post but I have not find the solution: I have a Maxtor STM3500320AS 500Gb Firmware MX15 not recognized by BIOS, so I think BSY problem... I have used Nokia cable CA-42, all ok hyperterminal and the disk do all command... After all command... all like the guide When i tried m0,2,2,0,0,0,0,22 The drive is not recognized... I have tried all solution, Glist command, ect... Can I send firmware via hyperterminal o do another check? Thank you very much!!!
  6. If I Fixing BSY,do I lose my data? I have one maxtor drive from raid mirroring not recognizable....
  7. Hello, If I Fixing BSY,do I lose my data? I have one maxtor drive from raid mirroring not recognizable.... With nokia cable: nokia cable use BSY solution: BSY fix Thank you very much for all your work!