jiminycricket

Member
  • Content count

    4
  • Joined

  • Last visited

Community Reputation

0 Neutral

About jiminycricket

  1. Hi guys, I may be a da, but when I list commands I seem to get a slightly different list from others. 1TB ST31000340as F3 T>/C F3 C>Q Online CR: Rev 0011.0000, Flash, Abort Online ESC: Rev 0011.0000, Flash, AbortLoopOrBatchFile Online ' ': Rev 0001.0000, Flash, PauseOutput Online '.': Rev 0011.0000, Flash, DisplayActiveStatus Online '?': Rev 0011.0000, Flash, DisplayDiagBufferInfo Online '!': Rev 0011.0000, Flash, DisplayRdChannelRegs Online '$': Rev 0011.0000, Flash, DisplayRwStatsByZone Online '`': Rev 0011.0000, Flash, DisplayRwStats Online '<': Rev 0011.0000, Flash, DecRwScopeSync Online '>': Rev 0011.0000, Flash, IncRwScopeSync Online '{': Rev 0011.0000, Flash, ToggleEibTracing Online '~': Rev 0011.0000, Flash, DisplayInterfaceCmdState Online ^A: Rev 0012.0000, Flash, DisplayFirmwareRev Online ^B: Rev 0012.0000, Flash, GetThermistorTemperature Online ^C: Rev 0011.0000, Flash, FirmwareReset Online ^D: Rev 0011.0000, Flash, ToggleRwTracing Online ^E: Rev 0011.0000, Flash, DisplayInterfaceConfig Online ^F: Rev 0011.0000, Flash, DisplayInterfaceRdCacheInfo Online ^I: Rev 0011.0000, Flash, DisplayControllerRegs Online ^K: Rev 0011.0000, Flash, DisplayDstStatus Online ^L: Rev 0013.0000, Flash, DisplaySignOnMsg Online ^N: Rev 0011.0000, Flash, ToggleRwTracing Online ^P: Rev 0011.0000, Flash, ToggleDiagIdleMode Online ^Q: Rev 0011.0000, Flash, ResumeInterfaceTask Online ^R: Rev 0011.0000, Flash, EnableAsciiOnlineSerialPortMode Online ^S: Rev 0011.0000, Flash, PauseInterfaceTask Online ^T: Rev 0011.0000, Flash, EnableEslipSerialPortMode Online ^U: Rev 0011.0000, Flash, DisplayCongen Online ^V: Rev 0011.0000, Flash, ToggleInterfaceCmdEcho Online ^W: Rev 0011.0000, Flash, RwStatsEnableAndInit Online ^X: Rev 0011.0000, Flash, DisplayInterfaceAndRwCmdHistory Online ^Y: Rev 0011.0000, Flash, DisplayDstStatus Online ^Z: Rev 0011.0000, Flash, EnableAsciiDiagSerialPortMode Online ^\: Rev 0011.0000, Flash, ToggleDebugDisplayEnable All Levels CR: Rev 0011.0000, Flash, Abort All Levels '/': Rev 0001.0000, Flash, ChangeDiagLevel, /[Level] All Levels '+': Rev 0011.0000, Flash, PeekMemoryByte, +[AddrHi],[AddrLo],[Opts ] All Levels '-': Rev 0011.0000, Flash, PeekMemoryWord, -[AddrHi],[AddrLo],[Opts ] All Levels '=': Rev 0011.0000, Flash, PokeMemoryByte, =[AddrHi],[AddrLo],[Data ],[Opts] All Levels '@': Rev 0001.0000, Overlay, BatchFileLabel, @[LabelNum] All Levels '|': Rev 0001.0000, Overlay, BatchFileTerminator, | All Levels '*': Rev 0011.0000, Overlay, SpecialBatchFileFunction, *[FuncId],[Fun cParm0],[FuncParm1] All Levels 'A': Rev 0011.0000, Overlay, SetTestSpace, A[OptsOrParmSelect],[ParmV alue],[AddrType],[HdForCylLimit] All Levels 'L': Rev 0001.0000, Overlay, EnableLooping, L[Opts],[CountOrStopOnErr Code] Level 1 'S': Rev 0011.0000, Flash, EditProcessorMemoryByte, S[AddrHi],[AddrLo] ,[MemValue],[NumBytes],[Opts] Level 1 'U': Rev 0011.0000, Flash, EditBufferMemoryByte, U[AddrHi],[AddrLo],[M emValue],[NumBytes] Level 1 'e': Rev 0011.0000, Flash, SpinDownAndResetDrive, e[MsecDelay],[Opts] Level 1 'm': Rev 0011.0000, Flash, EditProcessorMemoryWord, m[AddrHi],[AddrLo] ,[MemValue],[NumBytes],[Opts] Level 1 'B': Rev 0011.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumB lks],[Opts],[symBits] Level 1 'D': Rev 0011.0000, Overlay, DisplayMemoryBlock, D[AddrHi],[AddrLo],[Com pVal],[NumBytes],[Opts],[sizeInBytes] Level 1 'G': Rev 0011.0000, Overlay, GenericRwRequest, G[Parm0],[Parm1],[Parm2], ...[Parm9] Level 1 'N': Rev 0011.0001, Overlay, SmartControl, N[subCmd],[subCmdParm0],[subC mdParm1] Level 1 'c': Rev 0011.0000, Overlay, BufferCompare, c[srcBlk],[RefBlk],[NumBlks] ,[ContOnErr] Level 2 'U': Rev 0011.0000, Flash, SpinUpDrive, U[HoldState],[Hd],[Cyl] Level 2 'Z': Rev 0011.0000, Flash, SpinDownDrive, Z Level 2 'B': Rev 0011.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumB lks],[Opts],[symBits] Level 2 'C': Rev 0011.0000, Overlay, BufferCopy, C[srcBlk],[DestBlk],[NumBlks] Level 2 'E': Rev 0011.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecial FuncKey],[specialFunc] Level 2 'F': Rev 0011.0000, Overlay, ModTrkDfctLst, F[PSctr/LBA],[Action] Level 2 'H': Rev 0011.0000, Overlay, SelectHd, H[Hd],[skType],[Options] Level 2 'I': Rev 0011.0001, Overlay, DisplayModifyAdaptiveParm, I,[GroupId] Level 2 'K': Rev 0011.0000, Overlay, SetTrackingOffset, K[OffsetValue],[PersOrTe mpOpt],[unitsOpt],[ChanReload] Level 2 'M': Rev 0011.0000, Overlay, SetDiagIdleMode, M[ModeSelect],[ModeMask],[ ResetToPowerOn] Level 2 'N': Rev 0001.0000, Overlay, SetDirectWrite, N[EnableDirWrtModeOpt] Level 2 'O': Rev 0011.0000, Overlay, SeekFromCylToCyl, O[startPhyCyl0],[startPhy Cyl1],[NumSkPairs],[NumSeconds],[Hd] Level 2 'P': Rev 0011.0000, Overlay, BufferSetPattern, P[PatternSelOrPatternLow] ,[PatternHi],[PatternBits],[Opts],[blkNum],[NumBlks] Level 2 'Q': Rev 0011.0000, Overlay, WrRdRdChs, Q[sec],[NumSecs],,[PhyOpt],[Opts ] Level 2 'R': Rev 0011.0000, Overlay, RdChs, R[sec],[NumSecs],,[PhyOpt],[Opts] Level 2 'S': Rev 0011.0000, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUni tsOpt],[skType],[Options] Level 2 'T': Rev 0011.0000, Overlay, MeasureThroughput, T[Opts],[MinSkew],[MaxSk ew],[skewStep] Level 2 'V': Rev 0011.0000, Overlay, RdVerifyChs, V[sec],[NumSecs],[CompareBlk], [Opts] Level 2 'W': Rev 0011.0000, Overlay, WrChs, W[sec],[NumSecs],,[PhyOpt],[Opts] Level 2 'X': Rev 0011.0000, Overlay, DisplayTrkSectorInfo, X[LogCyl],[Hd],[sysAr eaOpt],[Opts],[RowsPerPage] Level 2 'Y': Rev 0011.0000, Overlay, SetDerpRetries, Y[Mode],[MaxRdRetries],[Max WrtRetries],[OtcTLevel],[Options] Level 2 'c': Rev 0011.0000, Overlay, BufferCompare, c[srcBlk],[RefBlk],[NumBlks] ,[ContOnErr] Level 2 'h': Rev 0011.0000, Overlay, XlatePhySec, h[sec],[NumSecs] Level 2 'j': Rev 0011.0000, Overlay, RdWedge, j[WedgeAddr],[NumWedges],[NumSkipe dWedges],[TranSize],[Opts],[RegAddr0],...,[RegAddr13] Level 2 'l': Rev 0011.0000, Overlay, XlateLogSec, l[sec],[NumSecs] Level 2 'o': Rev 0001.0000, Overlay, CorruptLba, o[Lba],[NumBlocks],[NumBytes],[ ByteOffset],[Flags] Level 2 'r': Rev 0011.0000, Overlay, RdLongOrSystemChs, r[LongSec],[LongSecsOrSy sSec],[sysSecs],[LongPhySecOpt],[LongOpts],[sysOpts] Level 2 's': Rev 0011.0000, Overlay, SkToPhyCyl, s[Cyl],[Hd],[ValidKey],[Offset] ,[OffsetUnitsOpt],[skType],[Options] Level 2 't': Rev 0011.0000, Overlay, XlateWedge, t[Wdg],[NumWdgs] Level 2 'u': Rev 0011.0000, Overlay, EnableDisableChannelPreampRegDisplay, u[Ena bleDisableOpt] Level 2 'v': Rev 0011.0000, Overlay, ConvertTrackPercentageToOffsetCount, v[Perc entage] Level 2 'w': Rev 0011.0000, Overlay, WrLongOrSystemChs, w[LongSec],[LongSecsOrSy sSec],[sysSecs],[LongPhySecOpt],,[sysOpts] Level 2 'x': Rev 0011.0000, Overlay, DisplayZoneInfo, x[Partition],[Hd],[Zone],[ DisplayWedgeOpSyms] Level 2 'y': Rev 0011.0000, Overlay, SetDerpRetryState, y[Type],[PathState],[Ret ryStateCnt],[LoopCnt1],[LoopCnt2] Level 2 'z': Rev 0011.0000, Overlay, WrWedge, z[WedgeAddr],[NumWedges],[NumSkipe dWedges],[TranSize],[Opt],[RegAddr0],...,[RegAddr13] Level 2 '7': Rev 0011.0000, Overlay, WrVerifyChs, 7[sec],[NumSecs],[WrBufBlk],[O pts] Level 3 'U': Rev 0011.0000, Flash, SpinUpDrive, U[HoldState],[Hd],[Cyl] Level 3 'V': Rev 0011.0000, Flash, RwPowerAsicReg, V[RegAddr],[RegValue],[WrOp t] Level 3 'Z': Rev 0011.0000, Flash, SpinDownDrive, Z Level 3 'D': Rev 0011.0000, Overlay, MeasureSkAccessTime, D[skLength],[skType],[ NumSks] Level 3 'E': Rev 0011.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecial FuncKey],[specialFunc] Level 3 'H': Rev 0011.0000, Overlay, SelectHd, H[Hd],[skType],[Options] Level 3 'O': Rev 0011.0000, Overlay, SeekFromCylToCyl, O[startPhyCyl0],[startPhy Cyl1],[NumSkPairs],[NumSeconds],[Hd] Level 3 'Q': Rev 0011.0000, Overlay, WrRdWrRdChs, Q[sec],[NumSecs],[Opts] Level 3 'R': Rev 0011.0000, Overlay, ReadCurrentServoDestination, R Level 3 'S': Rev 0011.0000, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUni tsOpt],[skType],[Options] Level 3 'c': Rev 0001.0000, Overlay, Measure Latch Force, c[NumberOfSamples] Level 3 'f': Rev 0011.0000, Overlay, RealTimeServoTrace, f[subCmd],[subCmdParm0] ,[subCmdParm1] Level 3 'p': Rev 0011.0000, Overlay, XlatePhySec, p[sec],[NumSecs] Level 3 'q': Rev 0011.0000, Overlay, XlateLogSec, q[sec],[NumSecs] Level 3 's': Rev 0011.0000, Overlay, SkToPhyCyl, s[Cyl],[Hd],[ValidKey],[Offset] ,[OffsetUnitsOpt],[skType],[Options] Level 4 'B': Rev 0011.0000, Overlay, EnableDisableRvff, B[NewRvffControlMode] Level 4 'D': Rev 0011.0000, Overlay, MeasureSkAccessTime, D[skLength],[skType],[ NumSks] Level 4 'E': Rev 0011.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecial FuncKey],[specialFunc] Level 4 'H': Rev 0011.0000, Overlay, SelectHd, H[Hd],[skType],[Options] Level 4 'K': Rev 0011.0000, Overlay, SetTrackingOffset, K[OffsetValue],[PersOrTe mpOpt],[unitsOpt],[ChanReload] Level 4 'O': Rev 0011.0000, Overlay, DisplayMicroJogForLogChs, O[LogCyl],[Hd],[O pts],[sysAreaOpt] Level 4 'S': Rev 0011.0000, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUni tsOpt],[skType],[Options] Level 4 'U': Rev 0011.0000, Overlay, ServoBatchTest, U[subCmd],[subCmdParm0],[su bCmdParm1],[subCmdParm2] Level 4 'e': Rev 0011.0000, Overlay, EnableDisablePesOutput, e[PesLeftShiftCnt], [DisablePesOut] Level 4 'l': Rev 0011.0000, Overlay, ScanTrackForServoDefectsAndZap, l[RdPositio nOpt] Level 4 't': Rev 0011.0000, Overlay, DisplayModifyZapTable, t[EntryNum],[EntryVa lue] Level 4 'u': Rev 0011.0000, Overlay, SetSkSpeed, u[Opts],[skSpeed] Level 4 'v': Rev 0011.0000, Overlay, ButterflySeekTest, v[startPhyCyl0],[startPh yCyl1],[NumSkPairs],[NumSeconds],[Hd] Level 5 'S': Rev 0011.0000, Flash, EnterServoMatlabShell, S Level 5 'B': Rev 0011.0000, Overlay, Servo Bode Plot, B[bodeType],[injAmp],[Fmin ],[Fmax],[NumFreq],[NumSamples],[EnableTracing] Level 5 'C': Rev 0011.0000, Overlay, GenericServoCmd, C[CmdNum],[Parm1],...[Parm 7] Level 5 'D': Rev 0011.0000, Overlay, ReadUnlockDdrBuffer, B[OperateCode] Level 5 'G': Rev 0011.0000, Overlay, SelectServoController, G[Head],[Controller] ,[inputShift] Level 5 'R': Rev 0011.0000, Overlay, RdServoRamAtAddr, R[Addr],[NumBytes] Level 5 'U': Rev 0011.0000, Overlay, EnableDisableServoUpdates, U[VcmDacUpdateOp t],[AToDUdateOpt] Level 5 'W': Rev 0011.0000, Overlay, WrServoRamAtAddr, W[Addr],[NumBytes],[Data] Level 5 'Z': Rev 0011.0000, Overlay, RdZapFromDiscToTable, Z Level 5 'd': Rev 0011.0000, Overlay, DisableEnableServoZap, d[ZapControlMode] Level 5 'i': Rev 0011.0000, Overlay, RdServoSymbolTableAtIndex, i[index] Level 5 'r': Rev 0011.0000, Overlay, RdServoRamAtIndex, r[index],[NumBytes],[byt eOffset] Level 5 'w': Rev 0011.0000, Overlay, WrServoRamAtIndex, w[index],[NumBytes],[Dat a],[byteOffset] Level 6 'B': Rev 0011.0000, Overlay, RunBatchFile, B[batchFileNum],[DisplayOpt] Level 6 'D': Rev 0011.0000, Overlay, DisplayBatchFile, D[batchFileNum] Level 6 'E': Rev 0011.0000, Overlay, EnterBatchFile, E[batchFileNum] Level 7 'Z': Rev 0011.0000, Flash, SpinDownDrive, Z Level 7 's': Rev 0011.0000, Flash, WrPeripheralReg, s[OpType],[RegAddr],[RegVa lue],[RegMask],[RegPagAddr] Level 7 't': Rev 0011.0000, Flash, RdPeripheralReg, t[OpType],[RegAddr],[NumRe gs],[RegMask],[RegPagAddr] Level 7 'B': Rev 0011.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumB lks],[Opts],[symBits] Level 7 'C': Rev 0011.0000, Overlay, BufferCopy, C[srcBlk],[DestBlk],[NumBlks] Level 7 'D': Rev 0012.0000, Overlay, DisplayTemperature, D,[DevSelect] Level 7 'E': Rev 0011.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecial FuncKey],[specialFunc] Level 7 'H': Rev 0011.0000, Overlay, SelectHd, H[Hd],[skType],[Options] Level 7 'I': Rev 0011.0001, Overlay, DisplayModifyAdaptiveParm, I,[GroupId] Level 7 'K': Rev 0011.0000, Overlay, SetTrackFormat, K[userAreaTrkFormatType],[s ysAreaTrkFormatType] Level 7 'P': Rev 0011.0000, Overlay, BufferSetPattern, P[PatternSelOrPatternLow] ,[PatternHi],[PatternBits],[Opts],[blkNum],[NumBlks] Level 7 'Q': Rev 0011.0000, Overlay, WrRdRdChs, Q[sec],[NumSecs],,[PhyOpt],[Opts ] Level 7 'R': Rev 0011.0000, Overlay, RdChs, R[sec],[NumSecs],,[PhyOpt],[Opts] Level 7 'S': Rev 0011.0000, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUni tsOpt],[skType],[Options] Level 7 'U': Rev 0011.0000, Overlay, ChannelTemperatureAdj, U[TweakTemperature], [Partition],[Hd],[Zone],[Opts] Level 7 'W': Rev 0011.0000, Overlay, WrChs, W[sec],[NumSecs],,[PhyOpt],[Opts] Level 7 'X': Rev 0011.0000, Overlay, DisplayPreampHdResistance, X Level 7 'Y': Rev 0011.0000, Overlay, SetDerpRetries, Y[Mode],[MaxRdRetries],[Max WrtRetries],[OtcTLevel],[Options] Level 7 'b': Rev 0011.0000, Overlay, EraseTrk, b[AdjacentTrkCnt],[EraseCntPerTrk ],[AcEraseOpt] Level 7 'c': Rev 0011.0000, Overlay, OffTrackCapability, c[sec],[NumSecs],[secIn crement],[Offset] Level 7 'h': Rev 0011.0001, Overlay, MarkMediaFlaw, h[PhyCyl],[Hd],[PhySec],[und isturbedRadius],[EraseBandTrks],[PtrLen],[WgSpec],[Od/Id] Level 7 'i': Rev 0011.0000, Overlay, GenericRwRequest, i[Parm0],[Parm1],[Parm2], ...[Parm9] Level 7 'm': Rev 0011.0000, Overlay, DOS, m[Flags],[startLba],[EndLba],[MinCount ] Level 7 'r': Rev 0011.0000, Overlay, RdNonVolatileAdaptiveParms, r[Opts] Level 7 'u': Rev 0011.0000, Overlay, EnableDisableWrFault, u[Op] Level 7 'w': Rev 0011.0000, Overlay, SaveAdaptivesToFlash, w[seg],,22 Level 7 'x': Rev 0011.0000, Overlay, DisplayZoneInfo, x[Partition],[Hd],[Zone],[ DisplayWedgeOpSyms] Level 7 'y': Rev 0011.0000, Overlay, SetDerpRetryState, y[Type],[PathState],[Ret ryStateCnt],[LoopCnt1],[LoopCnt2] Level 8 'U': Rev 0011.0000, Flash, SpinUpDrive, U[HoldState],[Hd],[Cyl] Level 8 'Z': Rev 0011.0000, Flash, SpinDownDrive, Z Level 8 'C': Rev 0011.0000, Overlay, ServoDiagSubCmds, C[subCmd],[Parm0],[Parm1] ,[Parm2] Level 8 'R': Rev 0011.0000, Overlay, ReadCurrentServoDestination, R Level 8 'S': Rev 0011.0000, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUni tsOpt],[skType],[Options] Level A 'C': Rev 0011.0000, Overlay, XlatePba, C[PbaHi],[PbaLow],[NumPbas] Level A 'D': Rev 0011.0000, Overlay, XlateSfi, D[PhyCyl],[Hd],[sfi],[NumSfis] Level A 'E': Rev 0011.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecial FuncKey],[specialFunc] Level A 'F': Rev 0011.0000, Overlay, XlateLba, F[LbaHi],[LbaLo],[sysAreaOpt],[Nu mLbas] Level A 'M': Rev 0011.0000, Overlay, SetControllerTestPort, M[Port],[Value] Level A 'P': Rev 0011.0000, Overlay, MergeAltListIntoSlipList, P Level A 'Q': Rev 0011.0000, Overlay, WrRdRdLba, Q[Lba],[NumLbas],[Opts] Level A 'R': Rev 0011.0000, Overlay, RdLba, R[Lba],[NumLbas],,[Opts] Level A 'S': Rev 0011.0000, Overlay, SkToLba, S[LbaHi],[LbaLo],[Offset],[OffsetU nitsOpt],[skType],[Options] Level A 'W': Rev 0011.0000, Overlay, WrLba, W[Lba],[NumLbas],,[Opts] Level A 'Y': Rev 0011.0000, Overlay, SetDerpRetries, Y[Mode],[MaxRdRetries],[Max WrtRetries],[OtcTLevel],[Options] Level A 'c': Rev 0011.0000, Overlay, XlateLllChs, c[Cyl],[Hd],[sec],[sysAreaOpt] ,[NumSecs] Level A 'd': Rev 0011.0000, Overlay, XlatePlpChs, d[Cyl],[Hd],[sec],[NumSecs] Level A 'e': Rev 0011.0000, Overlay, XlateNominalCyl, e[Cyl],[Hd],[sec],[sysArea Opt] Level A 'f': Rev 0011.0000, Overlay, XlatePlpChw, f[Cyl],[Hd],[Wdg],[NumWdgs] Level A 'l': Rev 0011.0000, Flash, DisplayTrkInfo, l[LogCyl],[Hd],[sysAreaOpt] ,[Opts],[RowsPerPage] Level A 'y': Rev 0011.0000, Overlay, SetDerpRetryState, y[Type],[PathState],[Ret ryStateCnt],[LoopCnt1],[LoopCnt2] Level C 'Q': Rev 0001.0000, Overlay, DisplayAsciiCmdInfo, Q[CmdLevel],[Cmd] Level C 'T': Rev 0011.0000, Overlay, GoopPlot, T[Hd],[startTrk],[EndTrk],[ECCLvl ],[NoFrcSync],[skipCnt] Level E 'B': Rev 0011.0000, Overlay, WrWedge, B[WedgeAddr],[NumWedges],[NumSkipe dWedges],[TranSize],[Opt],[RegAddr0],...,[RegAddr13] Level E 'C': Rev 0011.0000, Overlay, RdWedge, C[WedgeAddr],[NumWedges],[NumSkipe dWedges],[TranSize],[Opts],[RegAddr0],...,[RegAddr13] Level E 'G': Rev 0001.0000, Overlay, HeadDegradation, G[OperationControlOptions] ,[MeasurementControlOptions] Level E 'm': Rev 0011.0000, Overlay, FastMseserMeasurement, m[] Level E 'o': Rev 0011.0000, Overlay, FineRwOffset, o[NumAvgs],[TrkStepSize],[Num GuardTrks] Level E 'w': Rev 0011.0000, Overlay, SlowWrChs, w[sec],[NumSecs],[ConSec],[skip] ,[unitOfSkip] Level F 'U': Rev 0011.0000, Flash, SpinUpDrive, U[HoldState],[Hd],[Cyl] Level F 'Z': Rev 0011.0000, Flash, SpinDownDrive, Z Level F 'b': Rev 0011.0000, Flash, SetBaudRate, b[baudRate],[MsecDelay] Level F 't': Rev 0011.0000, Flash, WrPeripheralReg, t[OpType],[RegAddr],[RegVa lue],[RegMask],[RegPagAddr] Level F 'B': Rev 0011.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumB lks],[Opts],[symBits] Level F 'C': Rev 0011.0000, Overlay, BufferCopy, C[srcBlk],[DestBlk],[NumBlks] Level F 'D': Rev 0011.0000, Overlay, DisplayMemoryBlock, D[AddrHi],[AddrLo],[Com pVal],[NumBytes],[Opts],[sizeInBytes] Level F 'P': Rev 0011.0000, Overlay, BufferSetPattern, P[PatternSelOrPatternLow] ,[PatternHi],[PatternBits],[Opts],[blkNum],[NumBlks] Level F 'V': Rev 0011.0000, Overlay, BufferCompare, V[srcBlk],[RefBlk],[NumBlks] ,[ContOnErr] Level F 'Y': Rev 0011.0000, Overlay, SetDerpRetries, Y[Mode],[MaxRdRetries],[Max WrtRetries],[OtcTLevel],[Options] Level F 'r': Rev 0011.0000, Overlay, RdSystemChs, r[LogSec],[NumSecs],[Opts] Level F 's': Rev 0011.0000, Overlay, SkToPhyCyl, s[Cyl],[Hd],[ValidKey],[Offset] ,[OffsetUnitsOpt],[skType],[Options] Level F 'y': Rev 0011.0000, Overlay, SetDerpRetryState, y[Type],[PathState],[Ret ryStateCnt],[LoopCnt1],[LoopCnt2] Level F 'z': Rev 0011.0000, Overlay, SataDebug, z[subCmd],[Parm1],[Parm2],[Parm3 ] Level G 'B': Rev 0011.0000, Overlay, FillCorrectionBuffer, B[startAddr],[EndAddr ],[Pattern],[Opts] Level G 'C': Rev 0011.0000, Overlay, CopyCorrectionBuffer, C[srcAddr],[DestAddr] ,[NumSyms] Level G 'D': Rev 0011.0000, Overlay, DisplayCorrectionBuffer, D[startAddr],[EndA ddr],[CompareData] Level G 'F': Rev 0011.0000, Overlay, FillSuperParityRam, F[startAddr],[EndAddr], [Pattern] Level G 'G': Rev 0011.0000, Overlay, DisplaySuperParityRam, G[startAddr],[EndAdd r] Level H 'B': Rev 0011.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumB lks],[Opts],[symBits] Level H 'P': Rev 0011.0000, Overlay, BufferSetPattern, P[PatternSelOrPatternLow] ,[PatternHi],[PatternBits],[Opts],[blkNum],[NumBlks] Level H 'S': Rev 0011.0000, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUni tsOpt],[skType],[Options] Level L 'C': Rev 0011.0000, Overlay, CopyLogFile, C[srcLog],[DestLog],[AppendOpt ] Level L 'D': Rev 0011.0000, Overlay, DisplayLogFile, D[Log],[ErrCode] Level L 'E': Rev 0011.0000, Overlay, EnableDisableLogging, E[ErrLoggingOpt],[Asc iiLoggingOpt],[RwStatsLoggingOpt] Level L 'I': Rev 0011.0000, Overlay, DisplayLogFileInfo, I[Log] Level L 'c': Rev 0011.0000, Overlay, CreateLogFile, c[Log],[LogType],[bufferOrDi skOpt],[NumBytes] Level L 'd': Rev 0011.0000, Overlay, DeleteLogFile, d[Log] Level L 'i': Rev 0011.0000, Overlay, InitLogFile, i[Log] Level T 'B': Rev 0011.0000, Flash, SetBaudRate, B[baudRate],[MsecDelay] Level T 'm': Rev 0012.0000, Flash, FormatPartition, m[Partition],[FormatOpts], [DefectListOpts],[MaxWrRetryCnt],[MaxRdRetryCnt], [MaxEccTLevel],[MaxCertifyTrkRewrites],[ValidKey],[DataPattern] Level T 'E': Rev 0011.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecial FuncKey],[specialFunc] Level T 'F': Rev 0011.0000, Overlay, SetCongenParmCmdHelpMsg, F[ValueRef],[Data] ,[ResetEnable] Level T 'O': Rev 0001.0000, Overlay, SelectDataOutputMode, O[Mode],[VerboseOpts] Level T 'P': Rev 0011.0000, Overlay, DownloadGenericFile, P[FileBytes] Level T 'R': Rev 0011.0000, Overlay, RdNonVolatileAdaptiveParms, R[Opts] Level T 'T': Rev 0011.0000, Overlay, OddEvenEncroachmentTest, T[strt tk],[end tk ],[hd],[rtry thrshld][ECC thrshld Level T 'V': Rev 0011.0000, Overlay, DisplayDefectLists, V[DefectListSelect],[Hd ],[startCyl],[NumCyls],[DisplaySummaryOpt] Level T 'W': Rev 0011.0000, Overlay, SaveAdaptivesToFlash, W[seg],,22 Level T 'i': Rev 0011.0000, Overlay, InitDefectList, i[DefectListSelect],[saveLi stOpt],[ValidKey] Level T '[': Rev 0011.0000, Overlay, AsciiLogControl, [[LogFunction],[Log] F3 C> Is it possible to extract pcb info from bad pcb and flash to identical new pcb for pcb swap? There are mixed reports of success with pcb swap. Could someone translate this to give me command sequence? Would F,,22 be useful? Thanks all
  2. Thank you MrZilla, I also get the same response with new pcb on new drive (which is recognizable correctly). I see from reviewing Seagate diag commands that you are certainly correct; could my problem be Dell specific? I get same response with "W" command. I also tried once again "unrecognized in bios" paper card trick and get: Spin Down Complete Elapsed Time 0.145 msecs F3 2>U Spin Up Complete Elapsed Time 34.160 secs F3 2> Blks 000E24-000E24 (000001), BufAddr 001C4800-001C49FF, DBA 061C4800, BytesPerBl k 200 Online Cmd SDBP DFB Blks 000E25-000E25 (000001), BufAddr 001C4A00-001C4BFF, DBA 061C4A00, BytesPerBl k 200 Cmd Input Buf Blks 000E26-000E26 (000001), BufAddr 001C4C00-001C4DFF, DBA 061C4C00, BytesPerBl k 200 Diag Batch File Blks 000E27-000E27 (000001), BufAddr 001C4E00-001C4FFF, DBA 061C4E00, BytesPerBl k 200 Blks 000E28-000E28 (000001), BufAddr 001C5000-001C51FF, DBA 061C5000, BytesPerBl k 200 Blks 000E29-000E29 (000001), BufAddr 001C5200-001C53FF, DBA 061C5200, BytesPerBl k 200 Blks 000E2A-000E2A (000001), BufAddr 001C5400-001C55FF, DBA 061C5400, BytesPerBl k 200 Blks 000E2B-000E2B (000001), BufAddr 001C5600-001C57FF, DBA 061C5600, BytesPerBl k 200 Blks 000E2C-000E2F (000004), BufAddr 001C5800-001C5FFF, DBA 061C5800, BytesPerBl k 200 Blks 000E30-000E33 (000004), BufAddr 001C6000-001C67FF, DBA 061C6000, BytesPerBl k 200 Blks 000E34-000E37 (000004), BufAddr 001C6800-001C6FFF, DBA 061C6800, BytesPerBl k 200 Blks 000E38-000E3B (000004), BufAddr 001C7000-001C77FF, DBA 061C7000, BytesPerBl k 200 Blks 000E3C-000E5B (000020), BufAddr 001C7800-001CB7FF, DBA 061C7800, BytesPerBl k 200 Diag Mode Cmd SDBP DFB Blks 000E5C-000E7B (000020), BufAddr 001CB800-001CF7FF, DBA 061CB800, BytesPerBl k 200 Drive Geometry SDBP DSB Blks 000E7C-000E9B (000020), BufAddr 001CF800-001D37FF, DBA 061CF800, BytesPerBl k 200 Ext Test Service SDBP DSB Blks 000E9C-000EBB (000020), BufAddr 001D3800-001D77FF, DBA 061D3800, BytesPerBl k 200 Blks 000EBC-000F15 (00005A), BufAddr 001D7800-001E2BFF, DBA 061D7800, BytesPerBl k 200 Blks 000F16-000F6F (00005A), BufAddr 001E2C00-001EDFFF, DBA 061E2C00, BytesPerBl k 200 Blks 001708-001A99 (000392), BufAddr 002E1000-0035508F, DBA 062E1000, BytesPerBl k 208 Default Diag Rd Buf Blks 001AAB-001E3C (000392), BufAddr 00355600-003C968F, DBA 06355600, BytesPerBl k 208 Default Diag Wrt Buf Seagate "support" gives me the bum's rush. They won't even tell me how I could order a matching controller or at least a more forgiving one. Donor drive codes are exact match except donor date code is one day off. Backups? Yeah, I had backups across three of these 7200.11 Seabricks. Unfortunately the most important stuff is on the one I cannot resurrect. I am poor dumb american. It's so frustrating knowing the data is sitting there undisturbed but inaccessible. Seatools for dos doesn't let me reset maximum capacity. Somebody at Seagate needs to be pistol whipped. Looks like there ought to be a software approach to the service sector but what do I know? Thirty hours of reading and I am still scratching my head. I sincerely thank you, however, for your insight. jiminycricket
  3. Thank you for your insight MrZilla, however when I try the # command I receive: F3 T>/1 F3 1># Invalid Diag Cmd F3 1> I suppose it would be too easy if these numbers were visual on the chip and board lol. Anyway, thank you very much for your reply. You have given me food for thought.
  4. Hi everyone, I have precisely the same error message as OliKel. I successfully ressurected two seagates and perhaps from overconfidence became a little reckless with the third. Apparently I fried my controller with the process (no spinup). I found an identical hard drive (site code, fw, date code very close) thinking I could simply swap the controller and perhaps repeat the procedure. No luck, apparently there is drive specific info on the pcb rom. All is well until last step, instead of repartitioning I get error message "DiagError 0000500E Process Defect List Error R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, File Error 0000000 1". Drive spins up normally with very slight clicking that disappears after a few seconds. Could any of you learned gentlemen tell me what my options are now? Would it be feasible to take my boards somewhere and have the rom chip swapped? I am still optimistic that my very important data is sitting there undisturbed but inaccessible. I cant afford thousands of dollars in professional file recovery costs. Should I perhaps try again to find identical drive or am I barking up the wrong tree" Thanks all