Rousie

Member
  • Content count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Rousie

  1. No need to short the pins then? I thought the Card trick and shorting of the Read Channel Pins were different things? If not, then i'll start right away. Been preparing my desk for the past hour, couple of machines running and cables at the ready
  2. Hi Guys, Been a keen reader of this forum for some time, and finally joined up... Got a problem here with my 1TB 7200.11, and the response from the Terminal when connected is: RST 0x20m (P) SATA RESET LED 000000CC FADDR: 0024CDC9 From reading, and correct me if i'm wrong, but it seems as the terminal is locked? Now, i've looked at my PCB and it's different to both photo's which are posted here, illustrating the points which i need to connect to enable the terminal use. Could anyone kindly take a look and let me know which pins i need to be shorting out? (This is my PCB) Many thanks, Dean
  3. Hi Guys, Been a keen reader of this forum for some time, and finally joined up... Got the same problem here with my 1TB 7200.11, and the response from the Terminal when connected is: RST 0x20m (P) SATA RESET LED 000000CC FADDR: 0024CDC9 Now, i've looked at my PCB and it's different to both of which are posted here. Could anyone kindly take a look and let me know which pins i need to be shorting out? Many thanks, Dean