watheo

Member
  • Content count

    1
  • Joined

  • Last visited

Community Reputation

0 Neutral

About watheo

Profile Information

  • OS
    Windows 7 x64
  1. Hi Guys I have a bricked SEAGATE 7200.11 hdd. Model : ST31000340AS FW: SD04 I have followed this guide to recover the hdd but now the drive is able to detect in the bios but appears in windows as "ST3_INVALID PATA" All attempts at recovery with R-studio have failed with I/O errors. This is a copy of the hyperterminal screen below. Is there anyway to restore the drive or does the I/O errors mean its not a simple fw fix? Thanks in advance!! F3 T>/2 F3 2>Z Spin Down Complete Elapsed Time 0.149 msecs F3 2>U Error 1009 DETSEC 00006008 Spin Error Elapsed Time 31.675 secs R/W Status 2 R/W Error 84150180 F3 2>U Spin Up Complete Elapsed Time 2.171 secs F3 2>/1 F3 1>N1 F3 1>/ FlashLED - Failure Code:000000ee Failure Address:0022dca0 FlashLED - Failure Code:000000ee Failure Address:0022dca0 FlashLED - Failure Code:000000ee Failure Address:0022dca0 FlashLED - Failure Code:000000ee Failure Address:0022dca0 FlashLED - Failure Code:000000ee Failure Address:0022dca0 F3 T>m0,2,2,0,0,0,22 Invalid Diagnostic Command F3 T> F3 T>m0,2,2,0,0,0,0,22 Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewr ite Retries = 0000 User Partition Format 5% complete, Zone 00, Pass 00, LBA 00004339, ErrCode 000 User Partition Format 5% complete, Zone 00, Pass 00, LBA 00008DED, ErrCode 000 00080, Elapsed Time 0 mins 10 secs User Partition Format Successful - Elapsed Time 0 mins 10 secs F3 T>