MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically.
Hello ,sorry for my poor english , i have a new problem with this Hard disk st31000333as firmware sd3b, after complete the guide of lba0 and bsy , with this result : ASCII Diag mode F3 T>/2 F3 2>Z Spin Down Complete Elapsed Time 0.125 msecs F3 2>U Spin Up Complete Elapsed Time 8.634 secs F3 2>/1 F3 1>N1 F3 1>/T F3 T>i4,1,22 F3 T> Rst 0x20M ASCII Diag mode F3 T>m0,2,2,,,,,22 Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewrite Retries = 00C8 User Partition Format 3% complete, Zone 00, Pass 00, LBA 00004AA5, ErrCode 00000080, Elapsed Time 0 mins 30 secs User Partition Format Successful - Elapsed Time 0 mins 30 secs Zone re-format was skipped. F3 T>/2 F3 2>Z the hard disk is still in lba0 , can i write different command to resolve the problem ? my hard disk was a st31000333as sd35 firmware , the first time i've the problem i have resolvevd this the giude and i've udgrade firmware to the new sd3b that is the last . Can you help me?