makmag

Member
  • Content count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral

About makmag

Profile Information

  • OS
    Windows 7 x86
  1. Motherboard is Asrock 939 dual sata 2 disk Seagate Barracuda 7200.12 ST31000528AS 1TB HDD cc46 Welcome. My problem is that I can not run the drive. I do not care about saving the data to disk only. The BIOS can not see it, and the system (Windows XP SP3) show only: Type -unknown. No state -initiated Partition style -Not applicable Capacity -953 867 MB Not allocated -953 867 MB Reserved space -0 MB PartitionMagic 8.0 hangs. AFTER CONNECTING TO BOARD without short-circuited. Rst 0x20M Servo Processor Is Reset. RW: Disc Ctlr Initialization Completed. ExecuteSpinRequest (P) SATA Reset ASCII Diag mode F3 T>V4 Reassigned Sectors List Entries: 0006, Retrieved: 0006, Alts: 0000, Removed: 061B, Pending: 0006, GList: 0000, RList: 0000 Idx LBA PBA LLLCHS of LBA PLPCHS of PBA SFI Hours Msecs Status BBM Mask 0000 0000000009BF 0000000009BF 000001.0.000B 000001.0.000B 03DC29 ----- ------ 00000001 -------- 0001 0000000009C0 0000000009C0 000001.0.000C 000001.0.000C 03DE21 ----- ------ 00000001 -------- 0002 0000000009C1 0000000009C1 000001.0.000D 000001.0.000D 03E019 ----- ------ 00000001 -------- 0003 0000000009C2 0000000009C2 000001.0.000E 000001.0.000E 03E211 ----- ------ 00000001 -------- 0004 000074706DAE 000074722C5D 03D447.1.004C 03D447.1.0055 0147C1 ----- ------ 00100001 -------- 0005 000074706DAF 000074722C5E 03D447.1.004D 03D447.1.0056 0149B6 ----- ------ 00100001 -------- F3 T>/2 F3 2>Z Spin Down Complete Elapsed Time 10.503 secs F3 2>U HighPowerMode ExecuteSpinRequest Spin Up Complete Elapsed Time 5.887 secs F3 2>/ F3 T>m0,2,2,,,,,22 Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewrite Retries = not supported User Partition Format 0% complete, Zone 00, Pass 00, LBA 000000009A64, ErrCode 00000080, Elapsed Time 0 mins 30 secs User Partition Format Successful - Elapsed Time 0 mins 30 secs Zone re-format was skipped. <--------------1.20 seconds after F3 T>/1 F3 1>N1 Clear SMART is completed. F3 1> Disconnected the power. SUCCESS ! Drive visible in BIOS! :-) But unfortunately not in the system. Only in Device Manager: Type -unknown. No state -initiated Partition style -Not applicable Capacity -953 867 MB Not allocated -953 867 MB Reserved space -0 MB An attempt to update the firmware is not successful. Not know what it comes from? When updating the DiamondMax 22 also had a problem. But fortunately, this drive system have uploaded, and it was able to update the firmware. If you try to format the PartitionMagic 8.0 computer program crashed, and again after a reboot the drive is not visible in the BIOS.
  2. All of these posts read and rewritten. The system in which you can see the drive is XP sp3. ERROR SIM procedure does not work. On what would you start?
  3. Siema Piotrek.

    Udało Ci się uratować dysk Seagate 7200.12?

    Bo posiadam taki Seagate Barracuda 7200.12 ST31000528AS 1TB HDD cc46 i nie pokazuje w biosie ale w windzie tak :-)

    Znaczy się tylko w mededżerze urządzeń, Type -unknown.

    No state -initiated

    Partition style -Not applicable

    Capacity -953 867 MB

    Not allocated -953 867 MB...

  4. Welcome. Is there something new in the field of rescue Seagate 7200.12? I have this drive "Seagate Barracuda 7200.12 ST31000528AS 1TB HDD cc46" Drive is not detected by the BIOS, but as I plug in the operation of the system, it detects it as: Type -unknown. No state -initiated Partition style -Not applicable Capacity -953 867 MB Not allocated -953 867 MB Reserved space -0 MB Any suggestions? As to what, I have a terminal and once I was able to save disk maxtor Diamond Max 22
  5. Welcome. Very you please describe to me the full procedure how to save my hard Seagate Barracuda 7200.12 ST31000528AS 1TB.

    Sincerely poppy makmag