caspanis

Member
  • Content count

    6
  • Joined

  • Last visited

Community Reputation

0 Neutral

About caspanis

  1. Hi All , I am having this error message with nLite 1.0 RC3 : "D-The object is in use elsewhere." . This occurs during the driver integration stage. I am trying to integrate drivers version 6.70 (Nforce) from nvidia for my motherboard. The curious bit is this : Whenever I integrate the Sata Raid drivers only there is no problem, However , whenever I include drivers for other components such as the ethernet card , the SMbus drivers etc. The error manifests itself and then nLite appears to hang indefinitely Please assist if you or anyone else can . Best Regards, Caspanis
  2. Hi All, INstallation Failed After installer said "Starting Windows ..." I got the BLUE SCREEN OF DEATH with the message : "SESSION3_INITIALIZATION_FAILED" Don't know what to make of this. Once again , please help. Best Regards, Caspanis
  3. Hi All, Just tried to make CD again with the new nLite and it worked without a hitch ! I tried just the SATA RAID drivers with SP2 slipstream. I will now try to integrate other drivers ! P.S. I haven't actually tried an install yet but I am hopeful. Thanks for all the help ! Cheers, Caspanis
  4. As long as I try to integrate the nForce SataRaid drivers I have never seen such a message.Within German nLite Forum some users had posted the same thing and the answer was, that it was an issue in earlier nLite versions and should have been gone with RC1. After having googled I found this discussion about the message you got: http://www.webdeveloper.com/forum/archive/...hp/t-24691.html Have you done any changes within TXTSETUP.OEM, TXTSETUP.SIF or WINNT.SIF? Did you integrate just the content of the LEGACY subfolder as textmode driver or did you something else? Fernando 1, I also found that at a German nLite forum , possibly itsthe same post. I have made no changes within TXTSETUP.OEM, TXTSETUP.SIF or WINNT.SIF. All activity is detailed in the paragraph below. It is curious that you should say this because this occurs when I integrate just the legacy folder as textmode driver only , but after completion , when I try to do install the error of not finding a hard disk comes up then the only option now is to exit with F3 key. Noticing this I tried integrating the contents of the "sataraid" folder as well as the legacy folder in the hope that the install would be successfull. In all cases the same error occurs during the integration process. As a additional question do I need to integrate any other folder in the IDE directory other than the "legacy" folder ? Also after completion , there is a summary screen that details the size of various components at the bottom. In this area I see : Drivers 0.0 MB . I suspect it means that no drivers have been successfully integrated , am I correct ? Looking forward to your continued help. Cheers, Caspanis
  5. Which nLite version did you use? Hi , Firstly, thanks for the quick reply. When I tried this operation , I was using Nlite version 1.0 RC2 Cheers, Caspanis
  6. Hi All, I'm new to nLite and have been trying to install Windows XP on an ASUS A8N-SLI premium system with a RAID0 ( 2 X Seagate SATA drives 80GB) array. This array was set up in the motherboard BOIS and the Nvidia RAID bios. After these actions the two disks are seen as one disk by the motherboard bios. I have tried using nLite according to the first post in this thread with the following results : Note: The options selected are : 1) Service pack integration , 2) Driver integration , 3) Make ISO image Also , I am using WHQL version 6.70 of the nvidia nforce drivers. During the driver integration stage , I get the following message: "D-Object reference not set to an instance of an object" Nevertheless, the operation completes successfully but when attempting the install Windows complains about not being able to complete the install because no disks have been found . I am then only given the option to exit with the F3 key. What causes these attempts to fail in the way they have ? P.S. The disks are connected to port 1 and 2 of the Nvidia SATA controllers Please help. Thanks in advance. Best Regards, Caspanis