[Maximus-Decim Native USB Drivers]

I need some technical help on the usb driver.

I have installed the driver in my Windows 98 and most of the devices were detected correctly.

I have a 865G chip board and therefore the board should have USB 2.0 ready.

I have also download and installed the USB 2.0 driver from Intel and the device manager contained the following USB controller:

"Intel® 82801EB USB2 Enhanced Host Controller - 24DD"

However, when I attached the external hdd and start transferring a folder with around 260MB content, it required more than 5 minutes to finish. So it should end up using USB 1.1 for transfer.

So, my question is:

1. Do the driver support USB 2.0 with high speed?

2. How can I prove or determine if the device is running at USB 2.0 speed? (except from the transfer speed)

3. Any other suggestion to speed up the transfer?

4. A sidetracked question. How could I make 2 identical USB-IDE devices co-exist?

Thanks alot

[Maximus-Decim Native USB Drivers]

Great Problem here.

I am happy with the Maximum-Decim Native USB driver for a period of time. However, when I decide to add one more external USB disk (I already have an identical one), the system just cannot recognize the new disk. Only if I eject the existing drive, the new drive probe up.

Are there any methods that can make them co-exist?

thanks