[Pelekan]

stetrault, on Oct 22 2008, 02:43 PM, said:

Anyone had success to push LMI 4 by GPOs?

I did the fix for the Profile not existing, when i run the msiexec line it works fine with the /qr switch, when i double click on the msi it install fine and i dont run through any problem at all..

But i have a "Fatal error during installation" error in the eventlog when i try to push the msi through a GPO.

Anyone have ideas?

I'll try to check this next week. Now i'm working on other project and absolutely have no time to check this, sorry.

[jsnarcher]

Hi, I am trying to do a silent installation of LogMeIn. Does anyone know the how to pass the machine name parameter to the .msi file through command prompt installation?

[Cartman-SRK]

Does this fix make it so you can go back to the /Quiet switch? if so I have tried still no luck...Getting close though. gonna try the /passive switch in a few to see if that will work.

Will the progress bar even show if I am running the commands with psexec?

[HostFat]

Hello, do you know if there is a way/property to disable the mirror driver installation?
I mean, is there something that I can enter directly on the MSI installer?

I just know that this is possible on the logmein.exe on this way:
logmein.exe install -nomirrordrv
Is there something for the installer?

This post has been edited by HostFat: 12 November 2008 - 06:21 AM

[Parky84]

Quote

Guys

I have played around with this msi and got it to install completely silently. I edited the msi's properties table to include the parameters : "USERPASSWORD=pcpassword USERVERIFYPWD=pcpassword USEREMAIL=email@email.com USERWEBPASSWORD=password LicenseType=free ", instead of passing them via the coomand line as others have done before.....Just neater this way and less room for error.

Could you explain how you did that?

[origtopcat]

Parky84, on Nov 21 2008, 01:44 PM, said:

Quote

Guys

I have played around with this msi and got it to install completely silently. I edited the msi's properties table to include the parameters : "USERPASSWORD=pcpassword USERVERIFYPWD=pcpassword USEREMAIL=email@email.com USERWEBPASSWORD=password LicenseType=free ", instead of passing them via the coomand line as others have done before.....Just neater this way and less room for error.

Could you explain how you did that?

Has anyone found an answer to parky84's question?


Thanks

[GMFlash]

I'm trying to make a simple installer with the values already filled in. I did the following steps:

1. Downloaded the 4.0.784 LogMeIn.msi from https://secure.logmein.com/logmein.msi and opened it in Orca
2. In the Control table I filled my account info in the Text columns for USEREMAIL, USERWEBPASSWORD, USERPASSWORD, and USERVERIFYPWD
3. In the Property table I changed LicenseType to free
4. Saved the LogMeIn.msi (not Save As)

When I run the installer all of the fields are empty and it still asks me to fill them in. Does anyone know what the issue might be?

[GMFlash]

Parky84, on Nov 21 2008, 01:44 PM, said:

Quote

Guys

I have played around with this msi and got it to install completely silently. I edited the msi's properties table to include the parameters : "USERPASSWORD=pcpassword USERVERIFYPWD=pcpassword USEREMAIL=email@email.com USERWEBPASSWORD=password LicenseType=free ", instead of passing them via the coomand line as others have done before.....Just neater this way and less room for error.

Could you explain how you did that?

I figured it out! This also answers my above question.

• In Orca, highlight the Property table
  
• Press CTRL-R on your keyboard (or Tables -> Add Row in the menu bar)
  
• In the Property field put USEREMAIL and in the Value field put your account's email address
  
• Repeat steps 2-3 for USERWEBPASSWORD, USERPASSWORD, and USERVERIFYPWD

[bartosz31]

LANGUAGE POLNISH
witam.

mam problem
chcę żeby LGOMEIN instalowało się samo

a jak korzystam ze skryptu
logmein.msi /quiet USERPASSWORD=pcpassword USERVERIFYPWD=pcpassword USEREMAIL=email@email.com USERWEBPASSWORD=password LicenseType=free

to i tak po instalacji trzeba się rejestrować.

jak zrobić by kliknąć i mieć już gotowe zainstalowane ??

LANGUAGE ENGLISH
I greet.

I have problem I
want in order to LGOMEIN installed alone

and how I use from promissory note
logmein.it msi / quiet USERPASSWORD = pcpassword USERVERIFYPWD = pcpassword USEREMAIL = email@email.com USERWEBPASSWORD = password LicenseType = free

this and so it after installation was one should was register.

how would they make to click and to have already finished installed ??

[JimTech]

To all those seeking to install with a specified Computer Name:

Add this to the command line:

LMIDESCRIPTION=<Desired Name>

This works, as long as there are no spaces in the <Desired Name>

[bigred]

Has anyone had any luck with the lastest version of LogMeIn (4.0.784)? I've edited the msi file so that when the installer is run manually, all of the info is already present (e-mail, password, etc.) but the user still has to click on Next, Agree, then Next about 5 more times before it finishes. I'd like for the user to be able to just click once to start the installer, and once to finish, if that's possible.

This is a great thread, but I'm wondering if some of the methods previously discussed might have been rendered ineffective if this is a newer version of the LogMeIn installer?

Any help would be appreciated. Especially by some of you who were able to get things working previously in this thread.

Thanks

[illfame]

Great job guys and great info!!

Using ORCA and the info from this board, I got the logmein msi to install without the user having to click ANY buttons from start to finish, just the double-click to start the install. Also i've been able to get all the fields to automatically populate with account information and access code without any user intervention. HOWEVER, my problem is i want the MSI to register the username instead of registering the pc name. On the logmein account page, the pc's are registering as whatever their hostname is so it's impossible to figure out whose pc it is if the pc name is generic. Any ideas on how to do that?

Any help at all would be great...!!


Big REd: i got the msi to install without any buttons by simply taking the dialog boxes out of the equation. when my users double click the msi it starts installing right away. I used a program called adminstudio. Once you open the msi with the program, you will see a folder set. There is a folder set there for the user interface and dialog boxes. click on that, then click on the welcome dialog and expand it. Here it gives you the opportunity to change properties such as width, height, add/remove buttons, etc. - what your looking for is the modal property. If you change the modal property to false and save it, no dialog boxes will appear. In order for this to work though, you need to have the msi already configured to have the account info and access code because you wont be able to put in any of this. hope that helps

This post has been edited by illfame: 10 February 2009 - 01:31 PM

[bigred]

Thanks for the instructions illfame. I'll give that a try and let you know how it goes!

[bigred]

Working perfectly. Thanks for the info illfame, and for sharing!

[bartosz31]

Please indicate how you could script the whole operating

[Hexenkönig_92]

Hello,
Sorry for my English, I speak German.

So here's my solution with the latest LogMeIn:

1.)Steps from slimbyte, a bit changed:

1. on InstallExecuteSequence table, find GetDeployInfo action and change condition
from: UILevel=2 AND UPGRADEPRODUCT<>1 AND InstallMode<>"Remove"
into: UPGRADEPRODUCT<>1 AND InstallMode<>"Remove"

2. on InstallExecuteSequence table add following 3 actions:
action: GetLMIRegistrationCookie condition: NOT Installed sequence: 3710
action: LMIGetLicense condition: NOT Installed sequence: 3730
action: LMIGetLicenseForProfile condition: NOT Installed sequence: 3720

3. on Property table change following properties:
find LICENSETYPE property and change value from: IT into: free

3.i. on InstallExecuteSequence table, find CreateUserSetProperty action and change condition
from: CANCREATEUSER AND PASSWORDSOK="true" AND VersionNT AND REMOVE<>"ALL"
into: VersionNT AND REMOVE<>"ALL"

3.ii. on InstallExecuteSequence table, find CreateUser action and change condition
from: CANCREATEUSER AND PASSWORDSOK="true" AND VersionNT AND REMOVE<>"ALL"
into: VersionNT AND REMOVE<>"ALL"

2.)Creating a batch file with following source: (new empty text file-> open with editor->write in following text-> save as file.bat)

@echo off
logmein.msi /qr USERPASSWORD=pcpassword USERVERIFYPWD=pcpassword USEREMAIL=email@email.com USERWEBPASSWORD=password LicenseType=free
del logmein.msi
del setup.bat

Information:
@echo off: This hides the code during installation so that the installer can't see the passwords etc.
del logmein.msi/setup.bat: This deletes those two files so that the user can't find the inforations about the adresses etc.

3.)Puting all that into Inno Setup:

; Script generated by the Inno Setup Script Wizard.
; SEE THE DOCUMENTATION FOR DETAILS ON CREATING INNO SETUP SCRIPT FILES!

#define MyAppName "LogMeIn"
#define MyAppVerName "LogMeIn"
#define MyAppPublisher "LogMeIn"
#define MyAppURL "http://www.LogMeIn.com/"
#define MyAppExeName "LogMeIn.exe"

[Setup]
; NOTE: The value of AppId uniquely identifies this application.
; Do not use the same AppId value in installers for other applications.
; (To generate a new GUID, click Tools | Generate GUID inside the IDE.)
AppId={{CDA00B15-ADF5-4240-A14B-D436CF489D61}
AppName={#MyAppName}
AppVerName={#MyAppVerName}
AppPublisher={#MyAppPublisher}
AppPublisherURL={#MyAppURL}
AppSupportURL={#MyAppURL}
AppUpdatesURL={#MyAppURL}
DefaultDirName={pf}\Z-Tuning
DefaultGroupName={#MyAppName}
DisableProgramGroupPage=yes
OutputDir=C:\output\
OutputBaseFilename=setup
Compression=lzma
SolidCompression=yes

[Languages]
Name: english; MessagesFile: compiler:Default.isl
Name: german; MessagesFile: compiler:Languages\German.isl

[Files]
Source: C:\Dokumente und Einstellungen\EBI\Desktop\versuche\file.bat; DestDir: {app}; Flags: ignoreversion
Source: C:\Dokumente und Einstellungen\EBI\Desktop\versuche\LogMeIn.msi; DestDir: {app}; Flags: ignoreversion
; NOTE: Don't use "Flags: ignoreversion" on any shared system files

[Icons]
Name: {group}\{#MyAppName}; Filename: {app}\{#MyAppExeName}

[Run]
Filename: {app}\{#MyAppExeName}; Description: {cm:LaunchProgram,{#MyAppName}}


information:
innosetup copy's the files file.bat and LogMeIn.msi into a folder, and after installation, file.bat starts automaticly and installs the LogMeIn.msi

One little disadvantage is an error screen durning installation of LogMeIn.msi. But if you just klick on the ok button, Installation continues and it works perfect.

So Thank's to all,
Greetings from Switzerland:
Andreas

This post has been edited by Hexenkönig_92: 15 March 2009 - 05:51 AM

[gonhvvjvo]

Hexenkönig_92, on Mar 15 2009, 02:37 AM, said:

Hello,
Sorry for my English, I speak German.

So here's my solution with the latest LogMeIn:

1.)Steps from slimbyte, a bit changed:

1. on InstallExecuteSequence table, find GetDeployInfo action and change condition
from: UILevel=2 AND UPGRADEPRODUCT<>1 AND InstallMode<>"Remove"
into: UPGRADEPRODUCT<>1 AND InstallMode<>"Remove"

2. on InstallExecuteSequence table add following 3 actions:
action: GetLMIRegistrationCookie condition: NOT Installed sequence: 3710
action: LMIGetLicense condition: NOT Installed sequence: 3730
action: LMIGetLicenseForProfile condition: NOT Installed sequence: 3720

3. on Property table change following properties:
find LICENSETYPE property and change value from: IT into: free

3.i. on InstallExecuteSequence table, find CreateUserSetProperty action and change condition
from: CANCREATEUSER AND PASSWORDSOK="true" AND VersionNT AND REMOVE<>"ALL"
into: VersionNT AND REMOVE<>"ALL"

3.ii. on InstallExecuteSequence table, find CreateUser action and change condition
from: CANCREATEUSER AND PASSWORDSOK="true" AND VersionNT AND REMOVE<>"ALL"
into: VersionNT AND REMOVE<>"ALL"

2.)Creating a batch file with following source: (new empty text file-> open with editor->write in following text-> save as file.bat)

@echo off
logmein.msi /qr USERPASSWORD=pcpassword USERVERIFYPWD=pcpassword USEREMAIL=email@email.com USERWEBPASSWORD=password LicenseType=free
del logmein.msi
del setup.bat

Information:
@echo off: This hides the code during installation so that the installer can't see the passwords etc.
del logmein.msi/setup.bat: This deletes those two files so that the user can't find the inforations about the adresses etc.

3.)Puting all that into Inno Setup:

; Script generated by the Inno Setup Script Wizard.
; SEE THE DOCUMENTATION FOR DETAILS ON CREATING INNO SETUP SCRIPT FILES!

#define MyAppName "LogMeIn"
#define MyAppVerName "LogMeIn"
#define MyAppPublisher "LogMeIn"
#define MyAppURL "http://www.LogMeIn.com/"
#define MyAppExeName "LogMeIn.exe"

[Setup]
; NOTE: The value of AppId uniquely identifies this application.
; Do not use the same AppId value in installers for other applications.
; (To generate a new GUID, click Tools | Generate GUID inside the IDE.)
AppId={{CDA00B15-ADF5-4240-A14B-D436CF489D61}
AppName={#MyAppName}
AppVerName={#MyAppVerName}
AppPublisher={#MyAppPublisher}
AppPublisherURL={#MyAppURL}
AppSupportURL={#MyAppURL}
AppUpdatesURL={#MyAppURL}
DefaultDirName={pf}\Z-Tuning
DefaultGroupName={#MyAppName}
DisableProgramGroupPage=yes
OutputDir=C:\output\
OutputBaseFilename=setup
Compression=lzma
SolidCompression=yes

[Languages]
Name: english; MessagesFile: compiler:Default.isl
Name: german; MessagesFile: compiler:Languages\German.isl

[Files]
Source: C:\Dokumente und Einstellungen\EBI\Desktop\versuche\file.bat; DestDir: {app}; Flags: ignoreversion
Source: C:\Dokumente und Einstellungen\EBI\Desktop\versuche\LogMeIn.msi; DestDir: {app}; Flags: ignoreversion
; NOTE: Don't use "Flags: ignoreversion" on any shared system files

[Icons]
Name: {group}\{#MyAppName}; Filename: {app}\{#MyAppExeName}

[Run]
Filename: {app}\{#MyAppExeName}; Description: {cm:LaunchProgram,{#MyAppName}}


information:
innosetup copy's the files file.bat and LogMeIn.msi into a folder, and after installation, file.bat starts automaticly and installs the LogMeIn.msi

One little disadvantage is an error screen durning installation of LogMeIn.msi. But if you just klick on the ok button, Installation continues and it works perfect.

So Thank's to all,
Greetings from Switzerland:
Andreas

Sorry for my English, I speak Thai.

Thank you for Hexenkönig_92. It work great!.

[itkamaraj]

gonhvvjvo, on Mar 15 2009, 10:19 PM, said:

Hexenkönig_92, on Mar 15 2009, 02:37 AM, said:

Hello,
Sorry for my English, I speak German.

So here's my solution with the latest LogMeIn:

1.)Steps from slimbyte, a bit changed:

1. on InstallExecuteSequence table, find GetDeployInfo action and change condition
from: UILevel=2 AND UPGRADEPRODUCT<>1 AND InstallMode<>"Remove"
into: UPGRADEPRODUCT<>1 AND InstallMode<>"Remove"

2. on InstallExecuteSequence table add following 3 actions:
action: GetLMIRegistrationCookie condition: NOT Installed sequence: 3710
action: LMIGetLicense condition: NOT Installed sequence: 3730
action: LMIGetLicenseForProfile condition: NOT Installed sequence: 3720

3. on Property table change following properties:
find LICENSETYPE property and change value from: IT into: free

3.i. on InstallExecuteSequence table, find CreateUserSetProperty action and change condition
from: CANCREATEUSER AND PASSWORDSOK="true" AND VersionNT AND REMOVE<>"ALL"
into: VersionNT AND REMOVE<>"ALL"

3.ii. on InstallExecuteSequence table, find CreateUser action and change condition
from: CANCREATEUSER AND PASSWORDSOK="true" AND VersionNT AND REMOVE<>"ALL"
into: VersionNT AND REMOVE<>"ALL"

2.)Creating a batch file with following source: (new empty text file-> open with editor->write in following text-> save as file.bat)

@echo off
logmein.msi /qr USERPASSWORD=pcpassword USERVERIFYPWD=pcpassword USEREMAIL=email@email.com USERWEBPASSWORD=password LicenseType=free
del logmein.msi
del setup.bat

Information:
@echo off: This hides the code during installation so that the installer can't see the passwords etc.
del logmein.msi/setup.bat: This deletes those two files so that the user can't find the inforations about the adresses etc.

3.)Puting all that into Inno Setup:

; Script generated by the Inno Setup Script Wizard.
; SEE THE DOCUMENTATION FOR DETAILS ON CREATING INNO SETUP SCRIPT FILES!

#define MyAppName "LogMeIn"
#define MyAppVerName "LogMeIn"
#define MyAppPublisher "LogMeIn"
#define MyAppURL "http://www.LogMeIn.com/"
#define MyAppExeName "LogMeIn.exe"

[Setup]
; NOTE: The value of AppId uniquely identifies this application.
; Do not use the same AppId value in installers for other applications.
; (To generate a new GUID, click Tools | Generate GUID inside the IDE.)
AppId={{CDA00B15-ADF5-4240-A14B-D436CF489D61}
AppName={#MyAppName}
AppVerName={#MyAppVerName}
AppPublisher={#MyAppPublisher}
AppPublisherURL={#MyAppURL}
AppSupportURL={#MyAppURL}
AppUpdatesURL={#MyAppURL}
DefaultDirName={pf}\Z-Tuning
DefaultGroupName={#MyAppName}
DisableProgramGroupPage=yes
OutputDir=C:\output\
OutputBaseFilename=setup
Compression=lzma
SolidCompression=yes

[Languages]
Name: english; MessagesFile: compiler:Default.isl
Name: german; MessagesFile: compiler:Languages\German.isl

[Files]
Source: C:\Dokumente und Einstellungen\EBI\Desktop\versuche\file.bat; DestDir: {app}; Flags: ignoreversion
Source: C:\Dokumente und Einstellungen\EBI\Desktop\versuche\LogMeIn.msi; DestDir: {app}; Flags: ignoreversion
; NOTE: Don't use "Flags: ignoreversion" on any shared system files

[Icons]
Name: {group}\{#MyAppName}; Filename: {app}\{#MyAppExeName}

[Run]
Filename: {app}\{#MyAppExeName}; Description: {cm:LaunchProgram,{#MyAppName}}


information:
innosetup copy's the files file.bat and LogMeIn.msi into a folder, and after installation, file.bat starts automaticly and installs the LogMeIn.msi

One little disadvantage is an error screen durning installation of LogMeIn.msi. But if you just klick on the ok button, Installation continues and it works perfect.

So Thank's to all,
Greetings from Switzerland:
Andreas

Sorry for my English, I speak Thai.

Thank you for Hexenkönig_92. It work great!.

Thanks a lot for your explanantion.

Right now, i dont want silent installation. But i need to pre-poulate the values.

Right now, i did the following things
1. In Orca, highlight the Property table
2. Press CTRL-R on your keyboard (or Tables -> Add Row in the menu bar)
3. In the Property field put USEREMAIL and in the Value field put your account's email address
4. Repeat steps 2-3 for USERWEBPASSWORD, USERPASSWORD, and USERVERIFYPWD

Above are working perfectly

I need to still customize the installer by following actions :

1) "Software Options" screen - Just need to gray it out
2) "Description" - can i have a message saying, "Please enter your
subscription email address"
3) "Computer Access Code" - can i have it non-editable for
the user? ( pre-filled by using orca)
4) Can i eliminate the choice of LogMeIn products (Free should be default)
5) Can i eliminate the "Create New" account feature?

please answer for my above questions. i know it needs a small tweak in my msi.

thanks
kamaraj.s

[kakkola]

i followed the entire guid, but logmein doesnt get installed.

i tried to do the command LogMeIn.msi /quite from prompt after values change, but nothing happen..can't see anywhere LMI installed.


any clue?

[Camelot_One]

kakkola, on Mar 19 2009, 04:17 AM, said:

i followed the entire guid, but logmein doesnt get installed.

i tried to do the command LogMeIn.msi /quite from prompt after values change, but nothing happen..can't see anywhere LMI installed.


any clue?

I haven't taken the time to look at it lately, but I do know that they have made slight changes to the MSI since the original proceedure was posted. Some of the heading names have changed. There is also a unique appID now from what I remember (though that may not be the exact heading name). It is different between the different versions of the MSI. Thus, using the previously posted feature (with changes for the heading titles) on a downloaded IT copy of the MSI works, but not on the "Free" version download. I believe its just a matter of a key change within the MSI itself.

But like I said, I haven't taken the time to look into it lately. I will TRY to find time to do so over the weekend, but no promises.