[Kalabaza]

Yes nuhi, I clicked the apply button it taked several hours to integrate the languages packs, but, at the end of the process the option to make the cd was not available.

Today I try to install vista from this disk, but then a problem appears. At the end of the firts part, before the computers restarts a message is shown: "The selected language was not installed", why is this appening?

Thanks for your hard work and this is getting really good.

[sp00f]

nuhi, on Aug 10 2007, 01:44 PM, said:

datalife, I don't have that protection tab, attach your preset please.
About the other bold part which I hardly read without calling 911 can you explain without yelling. You want to integrate Italian which is already in, why, is it newer version or the Italian isn't even in before?
And later Control Panel - Features change fail, right?

Kalabaza, did you press Apply to actually integrate it, was the ISO page selected in the tasks before you did all that?

sp00f, on real or virtual machine? Which driver, how did you use them (e.g. extracted, selected inf)?

Real machine ofcourse, otherwise i dont have the hardware for the drivers.

[nuhi]

ZeDMaN, ok but attach the preset so that I may try.

Kalabaza, make sure that the ISO page was selected, there is no reason for it not to appear in that case after the Apply.
How many language packs did you integrate, try just ONE on the clean Vista (you can configure vLite as you want but start with the clean original Vista). Then if it fails with more than one at least I'll know where to start.

[sp00f]

Tried same drivers with this guide :

http://firegeier.unattended-sponsor.de/en/...into_image.html

Works like a charm.

[Kalabaza]

nuhi: I integrated 6 language packs: Japanese, Spanish, Italian, German, French and Russian.

And I do selected the option to make the bootable iso, I'm going to include the preset in the afternoon right now I'm not in my home.

I'm going to make one more test with one language pack only.

[dcyphure]

hey nuihi, with this version, when i apply and rebuild my image, after it finishes, my option buttons are finish and exit, when i click finish vlite dissapears, i've tried several times but it never lets me go to iso page, so i cant make an iso or burn it, nothing.

so for a workaround, how can i make the rebuilt files into a bootable disk?

[anonymous_user]

I had that happen too. I just reran vLite to make the ISO.

[dcyphure]

anonymous_user, on Aug 11 2007, 06:12 PM, said:

I had that happen too. I just reran vLite to make the ISO.

thanks, i did rerun it quite a few times and rebuilt it each time and still never let me to iso page, a reinstall might do it but i'm goin to try to just burn the rebuilt files myself, still trying to figure out how to make it bootable though, i dont see the option to do so with easy cd creator like i did when i had nero....which i dont have anymore


also i noticed the second time i rebuilt the files, under Accessories in removals, some of the files i had orignally checked for removal like wordpad were still there and it didnt remove the first time and i'm positive those were set for removal btw...it did the second time though

[nuhi]

Ok fixed that Finish thing for the next one.
In the meantime enable the option ISO page enabled before apply, even after apply it won't be Finish it will be Next.

[datalife]

datalife, on Aug 9 2007, 07:12 PM, said:

@Nuhi: somes serious issues in vLite 1.0 and 1.1

1° problem -> affected vLite 1.0 and 1.1 version's
After remove Internet Explorer component with vLite (v1.0/1.1) all the function in tab "protection" of ie7 internet options stop to work. Is not possible to add custom site's list in security categories. The system return popup error with red x circle. If Internet Explorer componente is not removed with vLite all work fine.

With IE component removed from vLite - > error show
img-001 - img-002 - img-003

Without IE component removed from vLite -> all work fine
img-000

2° problem -> affected only vLite 1.1 version -> MUI integration problem "seriuos problem" problen not exist in vLite 1.0 with same .ini configuration

Test to retail and genuine "localized" italian distribution of Vista (homepremium and ultimate) source VISTA-IT-DVD 32/64bit
Retail and Genuine "localized" italian distribution of vista has alredy built-in IT-MUI-LANGUAGE integrate.
vLite recognize from "integration" tab Italiam MUI language alredy installed (if this is or not enabled) img-011

- From vLited 1.1 image installation of Vista is not possible remove or add more installed default modules or functionality of SO like (differential compression, XPS support, HTTP print support, games and more...)
- Procedure stop and system return error popup with "red x circle"
- Event viewer return red error and the word MUI is present in all description's.
- The problem not exist with vLite 1.0 same .ini configuration
- Tested with and without add other "new pathes"

Vista image created with vLite 1.0
img-004 - img-005 - img-006 - img-007 - img-008

Vista image created with vLite 1.1
img-009 - img-010

Nuhi this is one very crucial problem please your attention!
P.S. Complete eventviewer .evtx archive (to load in local event viewer) and .ini presets files (to local load in vLite or notepad) are attached to this post.

Thanks

Yeah! All problem solved. Thanks to Jamieo and Nuhi

This post has been edited by datalife: 12 August 2007 - 02:10 PM

[Brando569]

looks like vlite is coming along well, i may mess around with this when i get my new 500gb HDD tomorrow since i use xp as my main os. the next thing i would like to see is tweaks and component removal keep up the good work buddy

[Alex]

Hi Nuhi,

Could You please answer to this: if I will select vista ultimate and select to build iso without adding/removing anything to get smaller clean instalation files with nothing removed or added, are there chances that in future versions You will update file selection for different vista versions?
Just do not want to copy 2.4 gb each time, so 1.1gb would be quicker. And I could put those files on flash usb. Can You confirm that file selection for each vista version is firm and final and no changes will be done in future versions.

Thank You,
Alex

[Dobby]

*Possible bug*

On Task Selection screen:
Check Components and Bootable ISO options (but uncheck Enable before apply)
Then Select components to remove and hit Apply.

When it's finished you don't get the option to Burn or create an ISO which I thought you would. You only get the options Finish or Exit which both quit the application.

[datalife]

umh! misconfigration of your vLite dot ini ? Or real bug ?
Install clean vLite to any separate directory and retest.

[Dobby]

It works fine if you check enable before apply then apply. You then get a Next button instead of the Finish button. I doubt a configuration issue would cause this.

[datalife]

I don't know... speeking with Nuhi.

Bye.

[nuhi]

Alex, just open it once in vlite and maybe do one tweak, disable all other pages, Apply - Rebuild. You'll have your isolated version untampered.

Dobby, yes it's a bug, already reported but thx anyway.

[Alex]

Hi,

Alex, just open it once in vlite and maybe do one tweak, disable all other pages, Apply - Rebuild. You'll have your isolated version untampered.

This does not work. Vista folder even get's bigger. Used apply and rebuild.

Any other suggestions?

BTW, after quiting vlite I see it in process tab and need to kill process to start vlite again.

Alex

[nuhi]

Alex, you used it wrong somehow, if you want to go step by step contact me on PM.

[ZonaNet]

nice

thank you very mach

I was find it