Are you the same Fernando who had moded driver packs for the nforce2 long time ago?
If so, long time no see XD (i know you from another forum tho, nforceHQ or somethign like that i think
On to more importan matters:
Intel Value SSD 2gb (which, to my knowledge, can't be connected to ANYTHING but this fraking netbook)
I had to wipe the ssd of this machine. It belongs to one of my mother's friends, it was used for her daughters school, it had BIOS and Windows administrator paswords, and the school refused to reveal them (or so they say, weird, if you ask me, cause it was bought by them and later handled to the school...)
I can't, for the life of me, install windows XP on it again.
If i integrate NO driver, i get the 0x0000007B BSOD early on the text mode part of the installation.
I then tried integrating several versions of the intelINF, and the text mode part went ok, i was able to select the valueSSD drive, format and copy files to it, but after the reboot, when the netbook loads the WINDOWS XP boot screen for the first time, before the graphical instalation begins, again the 0x0000007B BSOD.
I then found a guide telling me to only integrate the textmode driver for MY hardware, and i did so, with the one provided on that guide. (it was older than what is now posted here).
When i did it, i got an error that was posted here (and by googling it, i got here
***STOP: 0x00000019 (0x00000020, 0xF8471538, 0xF8471B50, 0xCCC35D5B)
*** acpi.sys - Address F8471538 base at F845B000, DateStamp 480252b1
*** acpi.sys - Address F8471B50 base at F845B000, DateStamp 480252b1
I then downloaded as many intel texmode drivers as i could find, and tired a few from this thread. So far, i either keep getting the 0x0000007B BSOD when windows tries to load the GUI part of the installation, or the BSOD i quoted.
I have tried so far (when i don't mention the BSOD, its the 0x0000007B one)
AHCI_v22.214.171.1240_for_ICH8 -> 0x00000019 BSOD
f6flpy96x86 (126.96.36.1994) -> 0x00000019 BSOD
32bit Intel RST AHCI & RAID driver v10.1.0.1008 WHQL
32bit Intel RST AHCI & RAID driver v10.1.0.1008 mod by Fernando
Each time starting with a fresh CD.
Im kinda lost by now, thinking about instaling lubuntu on it, and asking for forgiveness...
I also tried to install on a 16gb sd on mine, cause the netbook has a card reader, but then windows wont boot into the GUI part of the installation, complaining about a problem with hal.dll, and no boot.ini fidling fixed that either
I played with "fixboot" and "fixmbr" from the recovery console also.
Whatsmore, Exo is a local brand, and it offress NO support, no downloads, no nothing...
Edit: the netbook has NO cd reader, i use an external USB dvdrw
This post has been edited by Sesshoumaru: 08 April 2011 - 03:32 PM