[Eri]

6. Use the other options of nLite, if you want. It is a good idea to additionally integrate the Intel INF files drivers named Intel® Chipset Device Software as normal device (=PnP) driver. You can download these INF drivers here.

Please explain the step 6. The Intel INF drivers is a archive .EXE. How can integrate this Intel INF drivers?
Thank.

[Fernando 1]

Eri, on Nov 29 2007, 07:05 AM, said:

Quote

6. Use the other options of nLite, if you want. It is a good idea to additionally integrate the Intel INF files drivers named Intel® Chipset Device Software as normal device (=PnP) driver. You can download these INF drivers here.

Please explain the step 6. The Intel INF drivers is a archive .EXE. How can integrate this Intel INF drivers?

You have to extract it twice by using a tool like WinRar or 7-zip.

Here is what you should do:
1. Extract the whole EXE archive.
2. Extract the EXE archive again you will find after having done step 1.
3. Pick any INF file you find within the folder named "All".

I will add this into my guide or pre-extract the package and link to it.

This post has been edited by Fernando 1: 29 November 2007 - 03:54 AM

[Eri]

I will add this into my guide or pre-extract the package and link to it.

Both is better. I think.
Thanks for your help, again.

[sittingduck]

Fernando, just a couple of questions:

1. Nlite recommends removing the SCSI/RAID drivers from XP when integrating other drivers. Shouldn't this be added to the guide, or isn't it really necessary?

2. Likewise with the Intel chipset drivers: Should the original XP drivers be removed after integrating these? In case of yes, what should be removed? Because it doesn't seem there's an easy way to remove chipset drivers with Nlite like there is with the SCSI/RAID drivers.

And a suggestion: Instead of extracting the Chipset drivers twice from Intels exe file, just get the zip file instead. Much easier to add the drivers from that one, I think.

Thank you for your guide. And thanks to nuhi for a great app.

[Fernando 1]

sittingduck, on Nov 29 2007, 11:11 PM, said:

Fernando, just a couple of questions:
1. Nlite recommends removing the SCSI/RAID drivers from XP when integrating other drivers. Shouldn't this be added to the guide, or isn't it really necessary?
2. Likewise with the Intel chipset drivers: Should the original XP drivers be removed after integrating these? In case of yes, what should be removed? Because it doesn't seem there's an easy way to remove chipset drivers with Nlite like there is with the SCSI/RAID drivers.
And a suggestion: Instead of extracting the Chipset drivers twice from Intels exe file, just get the zip file instead. Much easier to add the drivers from that one, I think.

Here are my answers:
1. You can let nLite remove the SCSI/RAID drivers (to save some space on your hdd and time during the textmode part of the Windows Setup), but this is not really necessary.
2. You should not remove the original MS IDE drivers, because you may need them for your native IDE devices (CD-ROM/DVD).

Thanks for your suggestion regarding the Intel INF chipset driver package. I have modified my guide regarding this point.

CU
Fernando

This post has been edited by Fernando 1: 30 November 2007 - 06:36 AM

[D_TOX]

Hey Fernando,

First of all, fantastic guide! I've been looking for a specific AHCI Intel Slipstream guide for ages. However, as always, there is a problem - with my procedure.

The Facts:
HDD: New Western Digital 500GB SATA2 HDD.
Motherboard: Gigabyte 965P DS3 - (G965 Express Chipset) Motherboard Specs/Manual/Drivers etc.

My Procedure:

• Hard-Drive is plugged into the Intel Controller ports (Orange).
  
• Downloaded the 'Intel Matrix Storage Manager' (File: iata78_enu.exe). Run the '-a -a -p' command to extract the required files.
  
• Booted up Nlite and hit 'Integrate > Drivers'.
  
• Navigated to the folder with the extracted 'drivers' inside, and selected this one for my 'ICH8' board:
  
   Drivers.JPG (118.26K)
  Number of downloads: 142  Driver2.JPG (52.59K)
  Number of downloads: 81
  
  
• Hit next and slipstreamed my Windows XP Professional Service Pack 2 CD with what those drivers.
  
• Set Bios settings 'AHCI MODE - Enabled' and 'Onboard SATA/IDE Ctrl Mode - AHCI'.
  
• First boot device 'CD Rom'
  
• Get to XP setup ''No hard disk detected''.

The Problem:
Did i slipstream the right drivers?
My board is ICH8, however, i have found on Google people stating that Intel themselves said these are AHCI compatible and run under the ICH8R controller? Can someone confirm this?
What am i doing wrong?

Fernando, you seem like the only guy who can get me through this. I've been working on this SATA hard-drive for TWO weeks straight and i just want it to work! *Cry*

Please help.

This post has been edited by D_TOX: 05 December 2007 - 01:57 PM

[Fernando 1]

D_TOX, on Dec 5 2007, 08:56 PM, said:

My Procedure:

• Downloaded the 'Intel Matrix Storage Manager' (File: iata78_enu.exe). Run the '-a -a -p' command to extract the required files.

Why have you done this?
It would have been easier just to take the small driver package I have linked to within my guide.

Quote

The Problem:
Did i slipstream the right drivers?

No, you slipstreamed the wrong SATA RAID and not the needed SATA AHCI Controller (just 1 position above the one you enabled).

Quote

My board is ICH8, however, i have found on Google people stating that Intel themselves said these are AHCI compatible and run under the ICH8R controller? Can someone confirm this?

The ICH8 Controller will be detected by Windows Setup, if you integrate the needed Intel textmode driver for the ICH8 SATA AHCI Controller.

Quote

What am i doing wrong?

You didn't enable the needed AHCI Controller, because you don't have a RAID array.

[D_TOX]

Fernando 1, on Dec 5 2007, 08:11 PM, said:

D_TOX, on Dec 5 2007, 08:56 PM, said:

My Procedure:

• Downloaded the 'Intel Matrix Storage Manager' (File: iata78_enu.exe). Run the '-a -a -p' command to extract the required files.

Why have you done this?
It would have been easier just to take the small driver package I have linked to within my guide.

Quote

The Problem:
Did i slipstream the right drivers?

No, you slipstreamed the wrong SATA RAID and not the needed SATA AHCI Controller (just 1 position above the one you enabled).

Quote

My board is ICH8, however, i have found on Google people stating that Intel themselves said these are AHCI compatible and run under the ICH8R controller? Can someone confirm this?

The ICH8 Controller will be detected by Windows Setup, if you integrate the needed Intel textmode driver for the ICH8 SATA AHCI Controller.

Quote

What am i doing wrong?

You didn't enable the needed AHCI Controller, because you don't have a RAID array.

Your driver package is on Rapidshare! Which means i would have to wait 128 minutes from the time i encountered this guide. The Intel drivers i extracted before i encountered your guide, i googled your guide after my initial attempt failed!

Right!! Oki doki, so, all i need to do is click the HH/HO AHCI controller above the one i had originally selected and slipstream this into the XP installation instead?

It was just a matter of me selecting the wrong driver? Furthermore, are those drivers in my picture the correct drivers to work with my ICH8 controller, did i extract and use the right ones under 'Mode - TXT'?

Thankyou very much Fernando.



So, let me know?

[Fernando 1]

D_TOX, on Dec 5 2007, 09:22 PM, said:

Your driver package is on Rapidshare! Which means i would have to wait 128 minutes from the time i encountered this guide. The Intel drivers i extracted before i encountered your guide, i googled your guide after my initial attempt failed!

You only have to wait a few seconds unless you have used Rapidshare for a big download just before.

Quote

Right!! Oki doki, so, all i need to do is click the HH/HO AHCI controller above the one i had originally selected and slipstream this into the XP installation instead?
It was just a matter of me selecting the wrong driver?

Yes! The correct one for you is the one above the one you have enabled.
By the way: I have written within my guide, that you should enable all listed Intel SATA Controllers, if you are not sure, which one of the listed Controller is the correct one.

Quote

Furthermore, are those drivers in my picture the correct drivers to work with my ICH8 controller, did i extract and use the right ones under 'Mode - TXT'?

Yes!

[D_TOX]

Fernando 1, on Dec 5 2007, 08:38 PM, said:

D_TOX, on Dec 5 2007, 09:22 PM, said:

Your driver package is on Rapidshare! Which means i would have to wait 128 minutes from the time i encountered this guide. The Intel drivers i extracted before i encountered your guide, i googled your guide after my initial attempt failed!

You only have to wait a few seconds unless you have used Rapidshare for a big download just before.

Quote

Right!! Oki doki, so, all i need to do is click the HH/HO AHCI controller above the one i had originally selected and slipstream this into the XP installation instead?
It was just a matter of me selecting the wrong driver?

Yes! The correct one for you is the one above the one you have enabled.
By the way: I have written within my guide, that you should enable all listed Intel SATA Controllers, if you are not sure, which one of the listed Controller is the correct one.

Quote

Furthermore, are those drivers in my picture the correct drivers to work with my ICH8 controller, did i extract and use the right ones under 'Mode - TXT'?

Yes!

Thankyou fernando! I will try this out as soon as possible. I'll let you know how i get on!

Put it this way: If i don't come back within a few hours, it worked. On other hand, it may have failed. So! Just sit tight, and ill get back to you sometime in the future.

P.S Why the hell isn't this guid STICKY'd!? It is godlike! Thanks again buddy, wish me luck.

[D_TOX]

Argggggggggggh!

I slipstreamed ALL those available drivers onto the CD like you suggested Fernando. Plugged HDD into the Orange SATA Intel ports, set AHCI Mode to 'Enabled' and set 'Onboard SATA/IDE Ctrl Mode' to 'AHCI'. Started up the Windows installation, 'Setup is Copying files' then pressed Enter when it gets to the 'Install Windows XP on Hard Drive'. Then it takes me to that screen, AGAIN! ''No hard drive detected, Press F3 to quit setup''.

Argh!

So i quit setup, set AHCI Mode to 'Disabled' but left the Onboard SATA/IDE Ctrl Mode to AHCI. Went through the process, this time it found the HDD. I formatted, went through the 'Copying Files' process etc, then reset PC. Before entering the actual Windows installation, i went back into bios and enabled AHCI Mode. Reset. Got to the Windows logo 'loading' screen to carry on the installlation and i get a bSod!?!?

For f*** sake what am i doing wrong?

If i start all over again but with Slipstreamed Gigabyte druvers and plug it into the GSATA ports (Gigabyte SATA) and leave 'AHCI Mode' to 'Enabled', but Onboard SATA/IDE Ctrl Mode to 'AHCI' i get the 'Intel AHCI Bios' during post telling me 'AHCI Bios Not Installed'. However, using the GSATA ports and the Gigabyte drivers, i can install Windows, but obviously not with AHCI enabled, and no extra features, or am i mistaken?

I just don't know what to do. I want to install INTEL AHCI with AHCI MODE ENABLED in my Bios, the Gigabyte 'process' just seems sucky and i can't have 'AHCI Mode' enabled.

So whats the deal?
What do i need to do?
Am i doing the setup wrong?
Should i leave AHCI Mode disabled until Windows XP is fully installed to get it to work?

Please help!

EDIT: Do you know what? I just don't think my Motherboard supports INTEL AHCI. My HDD needs to be in the GSATA ports, and i need to slipstream the Gigabyte 'Jmicron' controller drivers. But even then, when that is done, enabling 'AHCI Mode' in Bios causes the bSod. Which makes me wonder if this board supports AHCI at all, and if it doesn't, why the hell is it in the Bios? Does the 'AHCI Mode' only relate to Intel, while the 'Onboard SATA/IDE Ctrl Mode - AHCI' relates to the Jmicron controller? What do you think?

This post has been edited by D_TOX: 06 December 2007 - 06:29 AM

[Fernando 1]

D_TOX, on Dec 6 2007, 12:44 PM, said:

EDIT: Do you know what? I just don't think my Motherboard supports INTEL AHCI. My HDD needs to be in the GSATA ports, and i need to slipstream the Gigabyte 'Jmicron' controller drivers.

That's right. Windows Setup is not able to recognise a JMicron S-ATA AHCI Controller connected hdd, if you load the Intel drivers.
Your motherboard obviously has an Intel ICH8 southbridge (and needs the Intel INF chipset drivers), but has not Intel S-ATA Controllers at all. If you want to use the AHCI features (which is recommended), you have to enable "AHCI Mode" within your BIOS and slipstream the Gigabyte (=JMicron) S-ATA textmode drivers.

Quote

But even then, when that is done, enabling 'AHCI Mode' in Bios causes the bSod.

You have to enable the "AHCI Mode" before you are going to install a Windows OS.

Quote

Which makes me wonder if this board supports AHCI at all, and if it doesn't, why the hell is it in the Bios? Does the 'AHCI Mode' only relate to Intel, while the 'Onboard SATA/IDE Ctrl Mode - AHCI' relates to the Jmicron controller?

Your motherboard supports AHCI, but the SATA AHCI Controller is the JMicron one. The S-ATA feature "Advanced Host Controller Interface" (=AHCI) was created by Intel first, but other chipset manufacturers are doing the same now (even NVIDIA recently have put the AHCI feature into their newest S-ATA Controllers).

[D_TOX]

Fernando 1, on Dec 6 2007, 12:58 PM, said:

D_TOX, on Dec 6 2007, 12:44 PM, said:

EDIT: Do you know what? I just don't think my Motherboard supports INTEL AHCI. My HDD needs to be in the GSATA ports, and i need to slipstream the Gigabyte 'Jmicron' controller drivers.

That's right. Windows Setup is not able to recognise a JMicron S-ATA AHCI Controller connected hdd, if you load the Intel drivers.
Your motherboard obviously has an Intel ICH8 southbridge (and needs the Intel INF chipset drivers), but has not Intel S-ATA Controllers at all. If you want to use the AHCI features (which is recommended), you have to enable "AHCI Mode" within your BIOS and slipstream the Gigabyte (=JMicron) S-ATA textmode drivers.

Quote

But even then, when that is done, enabling 'AHCI Mode' in Bios causes the bSod.

You have to enable the "AHCI Mode" before you are going to install a Windows OS.

Quote

Which makes me wonder if this board supports AHCI at all, and if it doesn't, why the hell is it in the Bios? Does the 'AHCI Mode' only relate to Intel, while the 'Onboard SATA/IDE Ctrl Mode - AHCI' relates to the Jmicron controller?

Your motherboard supports AHCI, but the SATA AHCI Controller is the JMicron one. The S-ATA feature "Advanced Host Controller Interface" (=AHCI) was created by Intel first, but other chipset manufacturers are doing the same now (even NVIDIA recently have put the AHCI feature into their newest S-ATA Controllers).

Right, okay.

So, i need to plug SATA cable into the Purple (GSATA) ports, Slipstream the Jmicron SATA drivers AND the Intel AHCI drivers into the XP disc, but not one or the other, BOTH must be on the disc?

Or do you mean, i should slipstream just the Jmicron drivers, with the SATA cable in the GSATA ports, and follow the XP process this way. All the while with AHCI Mode enabled?

EDIT: Basically, jsut to get this process confirmed. I'm going to get the Gigabyte SATA_SATA2_RAID driver from the Gigabyte website and im going to get the extracted Intel Matrix Storage Manager drivers from Intel. I'm going to integrate BOTH these drivers into an XP installation. Set Bios to AHCI Mode, with HDD plugged into GSATA ports (Or Intels?) and run the installation. With the SATA2 Gigabyte drivers (Jmicron) on the installation, it should enable my motherboard/chipset to SEE the Intel AHCI driver too?

EDIT2: Also, if you mean to just Slipstream and install the Jmicron SATA drivers with my HDD in the GSATA slots, then like i said before, with AHCI mode enabled in Bios, i get a quick screen during POST telling me 'Intel AHCI Bios Not Installed'. Which makes me think its not running in AHCI mode at all, meaning i do need Intel drivers installed?

This is truely the most aggrevating, confusing, tedious and most time consuming project i have ever undertaken with my PC. So i appreciate this help Fernando.

Cheers Fernando!

This post has been edited by D_TOX: 06 December 2007 - 07:14 AM

[Fernando 1]

D_TOX, on Dec 6 2007, 02:04 PM, said:

So, i need to plug SATA cable into the Purple (GSATA) ports, Slipstream the Jmicron SATA drivers AND the Intel AHCI drivers into the XP disc, but not one or the other, BOTH must be on the disc?

No, as far as I understand Gigabyte's homepage your mainboard doesn't have any Intel S-ATA Controller. So you only need to integrate the Gigabyte (=JMicron) SataRaid driver package as TEXTMODE driver.

Quote

Or do you mean, i should slipstream just the Jmicron drivers, with the SATA cable in the GSATA ports, and follow the XP process this way. All the while with AHCI Mode enabled?

Yes, that is what you should do.

Quote

EDIT: Basically, jsut to get this process confirmed. I'm going to get the Gigabyte SATA_SATA2_RAID driver from the Gigabyte website and im going to get the extracted Intel Matrix Storage Manager drivers from Intel. I'm going to integrate BOTH these drivers into an XP installation.

No, as I already wrote, you should not integrate both Intel and JMicron drivers.

Quote

Set Bios to AHCI Mode, with HDD plugged into GSATA ports (Or Intels?) and run the installation. With the SATA2 Gigabyte drivers (Jmicron) on the installation, it should enable my motherboard/chipset to SEE the Intel AHCI driver too?

I don't understand, what you mean. AFAIK your motherboard doesn't have any Intel S-ATA Controller. If I am right, you have no choice!

Quote

EDIT2: Also, if you mean to just Slipstream and install the Jmicron SATA drivers with my HDD in the GSATA slots, then like i said before, with AHCI mode enabled in Bios, i get a quick screen during POST telling me 'Intel AHCI Bios Not Installed'. Which makes me think its not running in AHCI mode at all, meaning i do need Intel drivers installed?

When your motherboard doesn't have any Intel S-ATA Controllers, the post message is correct and just means, that only Gigabyte AHCI Bios is installed.

Quote

This is truely the most aggrevating, confusing, tedious and most time consuming project i have ever undertaken with my PC. So i appreciate this help Fernando.

You are obviously confused now, but there is nothing to warry about.
Do the following:
At first check your mainboard manual, if you have any Intel S-ATA Controllers on board (obviously you don't, because Gigabyte doesn't offer any Intel S-ATA or Raid drivers for your motherboard).
When you are sure, that all S-ATA Controllers of your mainboard are Gigabyte (=JMicron) ones, do the following:
1. Create a bootable XP CD with slipstreamed 32bit Gigabyte (JMicron) S-ATA drivers (integrated as textmode). You can additionally integrate the Intel INF chipset drivers as PnP drivers (these INF drivers are not needed at all during the installation and have nothing to do with S-ATA or RAID connected hdd!).
2. Then prepare your mainboard BIOS for the Gigabyte S-ATA AHCI mode. The S-ATA Connector, where your hdd is connected, should be enabled and set to "AHCI mode".
3. Then boot off the nLited XP CD with the integrated Gigabyte SATA AHCI drivers.

[D_TOX]

Thankyou so much Fernando, i will carry this out, i know it will work this time. I'll let you know how i get on mate. Thanks so much for the help and guide.

EDIT: I think also, the two settings in the Bios are confusing. There is an 'AHCI Mode' Disable/Enable, and then there's the Onboard SATA/IDE Ctrl Mode - AHCI/RAID-IDE/IDE. Enabling the 'AHCI Mode' brings up the Intel 'POST' screen i described above. Enabling the 'AHCI' toggle next to Onboard SATA/IDE Ctrl Mode brings up a Gigabyte SATA2/IDE Bios during POST as well. Which makes me believe i should disable the 'AHCI Mode' setting (For Intel) and just leave the 'Onboard SATA/IDE Ctrl Mode' set to AHCI (To show the Gigabyte SATA2/IDE Bios during POST) What do you think? Should i just leave both enabled and ignore the Intel POST Screen?

 untitled.JPG (39.65K)
Number of downloads: 46

Thats what i get when i select the 'X32' drivers after navigating to the GSATA folder. It's either those, the X64, the Jmide, or the Floppy32/Floppy64 drivers. Are they the right ones, and why are they only PNP mode?

Also, should i run the GSATA installer after i have re-installed OS as well?

D_TOX.

This post has been edited by D_TOX: 06 December 2007 - 09:06 AM

[Fernando 1]

D_TOX, on Dec 6 2007, 02:53 PM, said:

EDIT: I think also, the two settings in the Bios are confusing. There is an 'AHCI Mode' Disable/Enable, and then there's the Onboard SATA/IDE Ctrl Mode - AHCI/RAID-IDE/IDE. Enabling the 'AHCI Mode' brings up the Intel 'POST' screen i described above. Enabling the 'AHCI' toggle next to Onboard SATA/IDE Ctrl Mode brings up a Gigabyte SATA2/IDE Bios during POST as well. Which makes me believe i should disable the 'AHCI Mode' setting (For Intel) and just leave the 'Onboard SATA/IDE Ctrl Mode' set to AHCI (To show the Gigabyte SATA2/IDE Bios during POST) What do you think? Should i just leave both enabled and ignore the Intel POST Screen?

I just have downloaded and read the manual of your mainboard.
Result:
There are 4 Intel ICH8 S-ATA ports (close to the border of the board) and 2 Gigayte (JMicron) S-ATA ports (near to the Intel ones, but closer to the center of the board).
So you can decide which of the S-ATA ports (Intel or JMicron) you want to use.
I recommend to take one of the Intel ports (0,1,2 or 3).
If you want to connect your S-ATA hdd to an Intel port, you should enable AHCI for this port.
As I could get only the description of the mainboard and not the BIOS details, I cannot give you any advice how to set the correct BIOS settings.

Quote

Thats what i get when i select the 'X32' drivers after navigating to the GSATA folder. It's either those, the X64, the Jmide, or the Floppy32/Floppy64 drivers. Are they the right ones, and why are they only PNP mode?

If you are using the Gigabyte (JMicron) drivers for Windows XP, you have to download the Floppy32 drivers, but you have to enable TEXTMODE while integrating with nLite.

Quote

Also, should i run the GSATA installer after i have re-installed OS as well?

I don't think, that you need to run the installer, if the drivers are already installed (by slipstreaming them).

[D_TOX]

Fernando 1, on Dec 6 2007, 03:30 PM, said:

There are 4 Intel ICH8 S-ATA ports (close to the border of the board) and 2 Gigayte (JMicron) S-ATA ports (near to the Intel ones, but closer to the center of the board).[/b]
So you can decide which of the S-ATA ports (Intel or JMicron) you want to use.
I recommend to take one of the Intel ports (0,1,2 or 3).
If you want to connect your S-ATA hdd to an Intel port, you should enable AHCI for this port.
As I could get only the description of the mainboard and not the BIOS details, I cannot give you any advice how to set the correct BIOS settings.

Indeed, which this is the problem ive been trying to describe. If i continue this slipstream in the Intel ports, i must install the Intel drivers, which, as you know, are not installing during the Slipstreamed setup!

PlayStation, on Nov 17 2007, 02:52 PM, said:

and another notice about ICH hubs - Intel offers ICHx and ICHxR versions. only R-labeled hubs support AHCI and RAID capabilities. I've spent a whole day trying to install AHCI on motherboard with ICH9 befor I looked at mb specification.

As this guy said, i don't think my ICH8 chipset has an AHCI controller or something yet on Google people are saying it does, just Intel hasn't officially acknowledged it. Also, everyone says to go with the Intel ports for better performance! You can see the dilemma i am in. Argh!

Why would you recommend the Intel ports over the GSATA ones anyway?

This post has been edited by D_TOX: 06 December 2007 - 10:08 AM

[Fernando 1]

D_TOX, on Dec 6 2007, 04:55 PM, said:

If i continue this slipstream in the Intel ports, i must install the Intel drivers, which, as you know, are not installing during the Slipstreamed setup!

Are you sure, that
a ) your S-ATA hdd was connected to an Intel S-ATA Connector while installing XP and
b ) you had enabled TEXTMODE while integrating the Intel S-ATA driver?

Quote

Why would you recommend the Intel ports by the way?

Because they are better and have better support (more frequently driver updates).

[D_TOX]

Fernando 1, on Dec 6 2007, 04:03 PM, said:

D_TOX, on Dec 6 2007, 04:55 PM, said:

If i continue this slipstream in the Intel ports, i must install the Intel drivers, which, as you know, are not installing during the Slipstreamed setup!

Are you sure, that
a ) your S-ATA hdd was connected to an Intel S-ATA Connector while installing XP and
b ) you had enabled TEXTMODE while integrating the Intel S-ATA driver?

Quote

Why would you recommend the Intel ports by the way?

Because they are better and have better support (more frequently driver updates).

I'm definitely selecting them in text mode.
 untitled.JPG (81.84K)
Number of downloads: 43

There, i have them all selected, then i'd hit OK, and follow the guide through. Then create an ISO from it, mount that image, then copy the image onto a CD. Right? Do you think i should put the INF Intel Chipset drivers into the slipstream, maybe that will help it recognize the AHCI drive?

I'm pretty sure i have all the BIOS settings setup correctly, but then again, maybe not. I've tried loads of different combinations. What i dont understand is why there are two 'AHCI' settings. The Onboard Sata/ide Ctrl Mode and just the 'AHCI Mode'. 'AHCI Mode' referring to the Inte i think and the Onboard mode refers to the Jmicron.

Also, Onboard SATA 0-3 Mode: Native/Legacy mode? Which mode should that be set at for Intel?

Onboard Sata/IDE Device: Enabled/Disabled?

So **** confusing, i feel like a complete noob.

This post has been edited by D_TOX: 06 December 2007 - 10:46 AM

[Fernando 1]

D_TOX, on Dec 6 2007, 05:37 PM, said:

There, i have them all selected, then i'd hit OK, and follow the guide through. Then create an ISO from it, mount that image, then copy the image onto a CD. Right? Do you think i should put the INF Intel Chipset drivers into the slipstream, maybe that will help it recognize the AHCI drive?

It is a good idea to additionally integrate the INF Intel Chipset drivers.

You didn't answer to my question, if your S-ATA hdd was connected to one of the Intel S-ATA port while installing XP. That is the most important point!
Please check, where the S-ATA data cable from your hdd is connected. If you want to use the Intel S-ATA Controller features, you have to make sure, that the cable is connected to one of the Intel ports.

Quote

I'm pretty sure i have all the BIOS settings setup correctly, but then again, maybe not. I've tried loads of different combinations. What i dont understand is why there are two 'AHCI' settings. The Onboard Sata/ide Ctrl Mode and just the 'AHCI Mode'. 'AHCI Mode' referring to the Inte i think and the Onboard mode refers to the Jmicron.

If you are really unsure, you should enable the AHCI option for all S-ATA ports (Intel and JMicron) while installing Windows XP. After the successful install you can disable the not needed ports and AHCI settings.

Quote

Also, Onboard SATA 0-3 Mode: Native/Legacy mode? Which mode should that be set at for Intel?

Set it as "native".

Quote

Onboard Sata/IDE Device: Enabled/Disabled?

You should enable it.

Good luck!
Fernando