Hey ppls this is the first time i try this so here it goes.
i need to put win2k, winxp, win2k3 and ERD Commander on one 700MB CD
so far i got win2k down to 189MB, XP is 324MB, Win2k3 is 407MB i need some way of makes Windows XP and Win2k3 use the same drivers.cab.
Thanks
Page 1 of 1
Win2k, WinXP, Win2k3 & ERD Commander
#2
Posted 17 November 2003 - 03:25 PM
I really think you are pushing it trying to do that. I just finished a CD-R that only had Windows 2000 and XP on the same disk and I still had to overburn by a few megs. Luckily, it worked and everything seems fine.
Here is a link to a guide/program I used to make part of the CD:
http://berns.cae.wis...es/wincdman.asp
Don't they have 900 meg CD-R's out?? You could try one of them, but I'm not sure.
My XP/2K CD-R was just about 705 megs in an ISO.
Good Luck...
Steve.
Here is a link to a guide/program I used to make part of the CD:
http://berns.cae.wis...es/wincdman.asp
Don't they have 900 meg CD-R's out?? You could try one of them, but I'm not sure.
My XP/2K CD-R was just about 705 megs in an ISO.
Good Luck...
Steve.
#3
Posted 18 November 2003 - 01:23 PM
Thanks but i will get all them on a CD, i will hack up the i386 until i can remove know more, i will take a look that the guide thanks mate
#4
Posted 18 November 2003 - 10:54 PM
thank cmsurfer. i'm going to give that a try and see what happens.
Share this topic:
Page 1 of 1



Help

Back to top








