[dencorso]

Fredledingue, on Jun 21 2008, 06:46 PM, said:

Before gathering all the files from theirs Windows locations you must have applied all these patches (already mentioned above):
Q311561
BHDD30
48BitLBA
SCANFRAG
[...]
Any comment?

Hi, Fredledingue!
Great news! Maximus-Decim has released BHDD31e, inside the latest MDCU.
Find it standalone here: BHDD31.ZIP
It contains the appropriate SCANDISK for DOS, so SCANFRAG is no longer needed.
It also contains ESDI_506.PDR v. 4.10.0.2230, which IS LLXX's patched ESDI_506.PDR v. 4.10.0.2225, with the version changed to 2230 so as to avoid any doubt that it IS the patched for 48-LBA version. [BTW, this renumbering is a legacy from the time when LLXX developed the patch, as there was a group that defended renumbering and another group favoring not renumbering, and it indicates that MD sides with the former group... No consensus has been arrived at, and probably never will. But it's OK, what matters really is that the patched file works beautifully. ]
Hence, your procedure now can be done using just two files: BHDD31e and Q311561!
Would you, please, update your post #26 accordingly?

This post has been edited by dencorso: 01 December 2008 - 08:13 PM

[sp193]

Someone please correct me if I am wrong, but does the unpatched Win98 FDISK does not only have a cosmetic defect, but that incorrect figure it displays also limits your operations? For example, I tried to FDISK a 80GB drive, but it showed my drive @ 100% to only have much less than the correct 76317MB capacity (Which is displayed in the patched FDISK), and does not allow me to partition my disk beyond that.

I DO know that the cosmetic defect in format.com does not affect it's function...

[dencorso]

sp193, on Nov 29 2008, 04:22 AM, said:

Someone please correct me if I am wrong, but does the unpatched Win98 FDISK does not only have a cosmetic defect, but that incorrect figure it displays also limits your operations? For example, I tried to FDISK a 80GB drive, but it showed my drive @ 100% to only have much less than the correct 76317MB capacity (Which is displayed in the patched FDISK), and does not allow me to partition my disk beyond that.

I DO know that the cosmetic defect in format.com does not affect it's function...

Short answer: Yes!

Long answer: read Q263044, Petr's thread on Format and Fdisk, and Q280737, in this order.

My opinion: Best to use GDISK (not for free) or the Ranish Partition Manager (wonderful, free, does not like SATA).

This post has been edited by dencorso: 23 February 2010 - 09:12 AM

[affter333]

I installed BHDD31.ZIP on my win98se

Scandisk now works on >137G partitions

but when trying to fix crosslinks, it hangs,
had to reset the machine, tried a few times
,the same result.

[aqcww]

hello
ummm,does bighdd patch support win me? i decide to change a new hdd.
thanks

[dencorso]

Most of the files inside BHDD31.ZIP are from ME. For ME, all you need is this fix: ME48BLBA.EXE. Now, the pointer I've given you is for the English version of the file, which probably works also with the chinese versions. Check the properties of your present C:\WINDOWS\SYSTEM\IOSUBSYS\ESDI_506.PDR: I suspect it already is an English language file. And even if it's not, the English file should work. Do back up first. Then try to apply this patch. If the patcher fails for any reason, restore your back-up and I'll help you install the patched ESDI_506.PDR from true DOS. But be sure to do it now, before you add a BIG HDD. Good luck!

[aqcww]

dencorso, on Jul 7 2009, 10:30 AM, said:

Most of the files inside bighdd are from ME. For ME, all you need is this fix: ME48BLBA.EXE. Now, the pointer I've given you is for the English version of the file, which probably works also with the chinese versions. Check the properties of your present C:\WINDOWS\SYSTEM\IOSUBSYS\ESDI_506.PDR: I suspect it already is an English language file. And even if it's not, the English file should work. Do back up first. Then try to apply this patch. If the patcher fails for any reason, restore your back-up and I'll help you install the patched ESDI_506.PDR from true DOS. But be sure to do it now, before you add a BIG HDD. Good luck!

Thanks for replying.do you mean that i don't need bhh patch for winme,just need the lba patch?

[dencorso]

aqcww, on Jul 8 2009, 02:17 AM, said:

Thanks for replying.do you mean that i don't need bhh patch for winme,just need the lba patch?

Yes! Moreover BHDD31.ZIP is intended for Win 98SE, not for ME.