• Announcements

    • xper

      MSFN Sponsorship and AdBlockers!   07/10/2016

      Dear members, MSFN is made available via subscriptions, donations and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, become a site sponsor and ads will be disabled automatically and by subscribing you get other sponsor benefits.
nuhi

nLite 1.4.9.1 - Honey Turbo 9.1

425 posts in this topic

Excellent nuhi, this is my favourite nLite version yet. Have created 2 seperate isos (one for main machine, one for laptop) without a single issue. Flawless Victory! :D

0

Share this post


Link to post
Share on other sites

g-force gn, please redownload beta 2 from nLite site, maybe you downloaded it before this fix or the site from where you got it was fast on the trigger:

http://www.msfn.org/board/minimum-space-re...659#entry746659

Tell them to update.

scorpi.dragon, be sure to add hotfixes after the apps themselves. For example IE7 and WMP11 on the top and below them hotfixes sorted by build date.

0

Share this post


Link to post
Share on other sites

WinXP Pro SP3 Build 5508-works perfectly!

0

Share this post


Link to post
Share on other sites
g-force gn, please redownload beta 2 from nLite site, maybe you downloaded it before this fix or the site from where you got it was fast on the trigger:

http://www.msfn.org/board/minimum-space-re...659#entry746659

Tell them to update.

scorpi.dragon, be sure to add hotfixes after the apps themselves. For example IE7 and WMP11 on the top and below them hotfixes sorted by build date.

What I did first was to create a new WinXP x64 SP2 DVD (with IE7 + WMP11 + WMP11 updates) and at the same time i turned it into an unattended boot disk as well. :thumbup That one worked a treat. :D

After that, I rebooted my PC and used nLite to copy my new updated DVD to my HDD, i then added WinXP x64 hotfixes plus some other addons and then modded WinXP. Burned it to DVD and now all is ok. :thumbup

0

Share this post


Link to post
Share on other sites

nuhi, after update to last version (silent-update) all problems solved, i think.

maybe some of the tweaks don`t work proper, but i don`t mind `cause i do so much regtweaks...

thanks also from whole crew and users of german-nlite! :wub:

g-force

Edited by g-force gn
0

Share this post


Link to post
Share on other sites

I have discovered the WMP11 slipstreamer only installed the 32-bit version of WMP11 and not the 64-bit version. :thumbdown Both 32-bit and 64-bit versions have to be installed and that explains why there were no hotfixes for WMP11 x64. I had to install them both (WMP11 x64 & hotfixes) manually in-order to fix an error with WinXP x64. Otherwise nLite 1.4.5 Beta 2 worked a treat! :thumbup

0

Share this post


Link to post
Share on other sites
I have discovered the WMP11 slipstreamer only installed the 32-bit version of WMP11 and not the 64-bit version. :thumbdown Both 32-bit and 64-bit versions have to be installed and that explains why there were no hotfixes for WMP11 x64. I had to install them both (WMP11 x64 & hotfixes) manually in-order to fix an error with WinXP x64. Otherwise nLite 1.4.5 Beta 2 worked a treat! :thumbup

first of all wmp slipstreamer doesnt install anything...it slipstream wmp 11 into windows cd.

wmp slipstreamer works both with x32 and x64 versions of wmp11. also hotfix listed on the site have both version for x32 and x64 wmp 11.

final u are not coherent at all....... :blink:

Edited by boooggy
0

Share this post


Link to post
Share on other sites

Using 4.5 beta 2 (downloaded today).

Slipstreamed SP3 b5508 EN into SP2 source. No further updates/hotfixes.

1.

Beta 2 has an issue when adding extra WinXP themes

Some kinda problem here, too. When loading an .INI created by nLite v1.4.1, the themes were displayed as being added, but I was unable to choose a default theme in nLite. Removing them caused an error message. After the themes were "re-added" and Windows was installed, no theme in the list that came after the one I chose as default in nLite was available in the dropdown list within Windows (although they were copied).

1a.

A file called $$!!$$!!.~~~ is present in %WinDir%\Resources\Themes (it's actually the My Theme(nL).theme file). I must include the remark that I'm trying to overwrite the file My Theme (nL).theme with one in $OEM%\$$\Resources\Themes.

2.

After installation, the workgroup was set to 'WORKGROUP', where it should've been 'GUILLAUME' as specified in nLite.

[edit] That's odd, it doesn't work in nLite 1.4.1 with a SP2 source either. Is it not allowed to have the same ('Guillaume') for username, organization and/or workgroup?

3.

Uniterruptable Power Supply tab is shown in Energy properties, even though the component is removed.

Edited by Guillaume
0

Share this post


Link to post
Share on other sites
[Edit] I've discovered WMP11 slipstreamer only installs 32-bit version of WMP11 and not 64-bit version. :thumbdown Only 64-bit version has to be installed and that explains why there were no WMP11 x64 hotfixes either. I had to install them both (WMP11 x64 & hotfixes) manually in-order to fix an error with WinXP x64. Otherwise nLite 1.4.5 Beta 2 worked a treat! :thumbup

Nuhi's Beta 2 patch worked a charm :thumbup and it would have been better to use WMP11 slipstreamer before nLite so that WMP11 x64 (inc. hotfixes) are fully integrated into my WinXPx64 disk and now all is ok! :rolleyes: Not one single error with my WinXPx64 installation disk either! :thumbup :thumbup

Edited by scorpi.dragon
0

Share this post


Link to post
Share on other sites

nlite beta 2 worked good :D

tested with sp3 5508 + wmp 11 + IE7 + other addon. all addons installed without error :)

npm26p.jpg

0

Share this post


Link to post
Share on other sites
nlite beta 2 worked good :D

tested with sp3 5508 + wmp 11 + IE7 + other addon. all addons installed without error :)

npm26p.jpg

I can confirm all that also, along with Xable's updates 1.7, OGE_OUE, some of Mrs. Peel's and Kel's addons.

no errors, no updates listed on MS upd.

0

Share this post


Link to post
Share on other sites
Hi!

Thank you for the new release!

I try to integrate IE8 in XP SP3, but i've an error at the end of the process...

I don't know why, all what I've done is Slipstream SP3 (on SP2 source), add IE8 executable in the hotfix lists!

yeah I cant integerate IE7 or IE8, I also slipstreamed SP3(3302) on SP2 source. I did manage to integrate WMP11 though.

Thanks for the Great app though

Edited by ManBearPig
0

Share this post


Link to post
Share on other sites

I have a question, is IE7 already in SP3 or not? :unsure:

Edited by scorpi.dragon
0

Share this post


Link to post
Share on other sites

The 1.4.5b2 seems to be fix the post-install standard usb devices problem ... in fact I have always "Found new hardware" and I must confirm install even with reg tweak (as my first post http://www.msfn.org/board/Suppressing-Hard...268#entry444268 ) .. I have retried with this beta with just integrated sata drivers and it's to be okay.

Nuhi, can we know what was the cause/problem ? (just curious ;-) , great job again

0

Share this post


Link to post
Share on other sites

Sorry my english... :rolleyes: Please add configuration for enable quick launch for default. Great. It is a idea. ;) Nlite The Best!! :thumbup

0

Share this post


Link to post
Share on other sites

Nuhi, can you add this for your next version when using Prompt Repair in Unattended page of nLite:

[Unattended]
OemSkipEula="Yes"

Cheers ;)

0

Share this post


Link to post
Share on other sites

I assum the old bug with percentages for System recovery isn't fixed yet?

0

Share this post


Link to post
Share on other sites

nuhi could you plz add an option for adding the sos command in the boot.ini it removes thé bootscreen would be nice to have integrated :thumbup

*EDIT* oh thinks its named loading screen sry xD

Edited by jqnson
0

Share this post


Link to post
Share on other sites
nuhi could you plz add an option for adding the sos command in the boot.ini it removes thé bootscreen would be nice to have integrated :thumbup

Not sure what you mean but I also am getting the message to choose which Windows to boot... Which makes no sense, obviously.

0

Share this post


Link to post
Share on other sites

Could we get the possibility to set the state of more services in future? I have to manually tweak some of them after installation. And no, I really mean Windows services, not those that kick in after install drivers and other stuff.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.