Login to Account Create an Account
HFSLIP64 v1.1.5 released
Posted 14 November 2009 - 05:27 AM
I'm not sure why you had those copy errors though, the code seems to be there and the txtsetup.sif is created right for the IE8 hotfixes, the files are present in the sourcess. It's almost as if there is a bad image or something. Very weird. Report your findings with the beta B I posted earlier (remove the above hotfix too).
Posted 14 November 2009 - 10:27 AM
I'm going to install now (slipstreamed with beta 'b')
I'll rebuild the CD w/o that hotfix later.
Wish me luck!
BTW I only include critical hotfixes that MU wants, no extra stuff, except WM11+HF, IE8+HF, WUA3.0 and MRT.
Edit: I just remembered something, yesterday, while re-building with beta 'b' I noticed that in the "processing WMP11" stage, the wmp11 hotfixes are processed one after another without ANY messages saying "x files copied" between them (like it happens with other HFs). plus, after that a ton of "0 files copied" messages appeared.
I DO need that HF, 'cause I install tha spanish langpack after installing windows, but I'm sure I should install it AFTER the langpack and not include it in the slipstreaming. I'll rebuild in a bit. Nice catch, tommy!
I think I will install using the SP2 CD and then check my list of HFs against the one in MU (what MU wants after installing), just to be sure.
Edited by jvidal, 14 November 2009 - 10:46 AM.
Posted 14 November 2009 - 11:04 AM
During TXTMODE and GFXMODE, I still got the same errors about files not being copied. Maybe due that hotfix. I'll test right away without it and get back to you.
The good news is that MU now only wants 3 hotfixes, namely: 951376, 974112, 890830 (MRT, which I noticed you intentionally left out).
Nicely done, tommy!
I'm off to test w/o that hotfix, I'll get back to you as soon as I finish!
Posted 14 November 2009 - 11:29 AM
In the meantime, here are my logs and txtsetup.sif
Posted 14 November 2009 - 12:00 PM
Edit: installed from the SP2 CD, i will install IE8 and wmp11 amd see what updates MU wants and check them against what I have. Maybe I'll find something...
Ok, I found three seemingly unneeded updates. I'll rebuild and test again.
BTW, i found something weird: the updates wanted by automatic updates (thru the yellow shield in the system tray) have nothing to do with what MU wants when I visit microsoft update...
Edited by jvidal, 14 November 2009 - 03:16 PM.
Posted 14 November 2009 - 04:15 PM
Still got the same file copying errors during TXTMODE and GFXMODE.
After that, MU still wants 951376, 974112 & 890830.
Attached are my log and txtsetup.sif
Posted 14 November 2009 - 09:01 PM
* 951376 - In sourceSS, can you check your driver.cab file to see if bthport.sys is version 5.2.3790.4274? It probably isn't. If it isn't in the cab, please continue reading this bullet. Can you also check the source folder to see if bthport.sys located outside of a CAB file. If it is located outside a cab file, please advise whether or not it is compressed. Also, please advise whether or not you see bthport.sy* or bthport.sys or both. If you see two, you found the prob.
* 974112 - Do me a favor... Let's dissect this one a bit. The file that is a prob is wstrmdll.dll or strmdll.dll. The one inside the hotfix is wstrmdll.dll, but I think it may get renamed on a traditional hotfix installation. On a clean installation of your sourcess folder, please check your windows folder and all subfolders for file wstrmdll.dll or strmdll.dll. Make note of what exact filename you see and version. Next, manually install 974112. After installing the hotfix manually, recheck the files again. Whatever the case is, the version should be 22.214.171.12438. What I need to know is what filename (wstrmdll.dll or strmdll.dll) is listed with a version of 126.96.36.19938, and I need to know the location of the file too.
* 890830 - I found an error with processing of the 890830. This will be fixed in the next iteration.
Last Q for now. Is triedit.dll or triedit.dl_ in the sourcess folder? You mentioned there was a copy error for that, and I'm trying to see where that file came from. Maybe it came from a hotfix?
Boy, it's tough going through someone elses code. Tomcat wrote this and I'm trying to figure it all out. Thanks for bearing with me. My coding is quite a bit rusty.
Edited by tommyp, 14 November 2009 - 10:06 PM.
Posted 15 November 2009 - 02:13 AM
Alright, I'll try to follow your steps.
In the source, the file is located in AMD64\driver.cab, v5.2.3790.1830. In sourceSS it's located in AMD64\driver.cab and it IS v5.2.3790.4274.
There are no bthport.sy* files outside any cab in the source, but in sourceSS, it is located in AMD64 in compressed form (bthport.sy_) and it's v5.2.3790.4274 (after decompressing it).
So I guess there's a problem there, one of the two is unneeded. Maybe txtsetup.sif references bthport.sys, which doesn't exist outside driver.cab, whereas bthport.sy_ does.
I'll have to get back to you on that one (i have to re-install, i deleted the VM)
in the source There are wtriedit.dl_ (I386) and triedit.dl_ (AMD64).
But, in sourceSS, there's ONLY wtriedit.dl_ (I386).
wtriedit.dll in source\I386 is v188.8.131.5242
Triedit.dll in source\AMD64 is v.184.108.40.20640
wtriedit.dll in sourceSS\I386 is v.220.127.116.1146 (updated!)
I believe that the 32bit dlls get a 'w' placed in front of them.
Oh, BTW triedit.dll and wtriedit.dll get updated in 956844 (both come in the package, with wtriedit.dll inside the "wow" folder).
there are two folders in the update: SP2QFE and SP2GDR, both containing triedit.dll and wtriedit.dll (inside another subfolder called 'wow').
ALL are v. 18.104.22.16846.
Hope this helps you!
it's 5AM, I'm off to bed, I'll continue tomorrow.
Edited by jvidal, 15 November 2009 - 02:32 AM.
Posted 15 November 2009 - 08:37 AM
I released a new beta C, please use this version for testing. I seem to recollect that TC disappeared before IE8 went final, so the IE8 slipstream code was for the beta. So in other words, there was extra files. I commented those extras out, so most of the copy errors will be gone.
The triedit.dll is a bit confusing. Earlier you said that triedit was in sourcess then the post above you said it's not. Please confirm.
The bluetooth stack hotfix, aka the 951376 is a bit tricky. The right file is there, even though there is one too many sys files. See how far you get with the 3 different steps below.
Step 1 - Before visiting WU, see if this part of the registry exists. No need to create it, just see if it's there.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP3\KB951376\Filelist. Revisit and see if it's applied.
Step 2 - Visit WU and don't install any hotfixes. If WU reports that the 951376 update isn't applied, See if bthport.sys exists anywhere in the windows folder. It should be in the system32\drivers folder. if it's not there, then extract it off the soucess and place it there. Revisit WU and see if it's applied.
Step 3 - If it's still not applied, manually create the above key and then revisit WU to see if it still complains. Basically what we are doing here is this: http://www.microsoft...n/ms08-030.mspx security update deployment, Windows XP (all editions), and going through the last few things in that table.
974112 - If WU is still reporting this one as not being applied, manually apply the hotfix from the EXE file. Please post the KB974112.log file. It's probably in the windows folder.
We're coming down the homestretch.... I think/hope!
Edited by tommyp, 15 November 2009 - 11:18 AM.
Posted 15 November 2009 - 10:13 AM
Tommy, it's like I said about triedit.dll. I never said it wasn't there, I just said, that it can not be copied during TXTsetup.
It's exactly as I posted at 5AM, that's the ascenario.
There are other files that are absent, namely the ones that can't be copied during GFXSETUP.
Now, I'm off to test beta C.
Posted 15 November 2009 - 10:23 AM
It just closes, no error messages, nothing.
It seems I found the problem. just after the media player11 section and right before directx9 extras section, theres a line that only says "goto :EOF"...I believe that's the problem. It doesn't follow an IF statement, just says Goto EOF on a line by itself.
I'll remove it and see what happens.
Too bad it didn't work, now a window popped-up saying that it can not find directx__redist.exe and after closing it. the script clsoed again...
it seems there's a "GOTO :EOF" after every section...
Edited by jvidal, 15 November 2009 - 10:58 AM.
Posted 15 November 2009 - 11:18 AM
Edited by tommyp, 15 November 2009 - 11:57 AM.
Posted 15 November 2009 - 11:30 AM
nope, same result. It just closes after WMP11 and its hotfixes.
Edited by jvidal, 15 November 2009 - 11:33 AM.
Posted 15 November 2009 - 11:57 AM
Posted 15 November 2009 - 12:21 PM
****, doesn't work either!!!
What the hell happened?
Edited by jvidal, 15 November 2009 - 12:25 PM.
Posted 15 November 2009 - 12:57 PM
:: TP MOVE WORK\CDROOT\%FLD64%\strmdll.dll WORK\CDROOT\I386\wstrmdll.dll >NUL
remove the :: TP
Also, test out B again to see if you get the same error.
Posted 15 November 2009 - 01:05 PM
b or e? (there are both in the attached zip)
I got confused
nevermind, i did it already.will test in abit. it's line 1424, BTW.
But, I noticed that you're moving files from the 64-bit folder to the 32-bit (wow) folder...just like that?
Edited by jvidal, 15 November 2009 - 01:09 PM.
Posted 15 November 2009 - 01:07 PM
Posted 15 November 2009 - 01:13 PM
If it finishes correctly, I"ll install and report right away.
update: it worked, CDimage is created.
Off to install now.
Edited by jvidal, 15 November 2009 - 01:23 PM.
Posted 15 November 2009 - 01:24 PM
Posted 15 November 2009 - 01:25 PM
first report: only two file copying errors during txtsetup: ie8props.propdesc and triedit.dll. An improvement.
Second report: rest of the setup went fine, no errors during gfxsetup.
Now I'm gonna check files versions/locations and registry entries. Also what MU wants.
Edited by jvidal, 15 November 2009 - 01:48 PM.
Posted 15 November 2009 - 01:52 PM
bthport.sys NOT present in system32\drivers.
Alright, extracted it to system32\drivers and revisited MU. Now MU doesn't want it (only two updates offered: 974112 & MRT).
registry key still doesn't exist, though.
third step: installed 974112, MU is happy now (except for MRT).
attached is kb974112.log
I hope this helps, we're sooooo close now!
Edited by jvidal, 15 November 2009 - 02:04 PM.
Posted 15 November 2009 - 02:54 PM
On a fresh installation, is the bthport.sys file located anywhere on the harddrive?
Can you give me a copy of your hfslip.cmd file that is inside the svcpack folder?
Is there a triedit.dll file anywhere on the harddrive?
Posted 15 November 2009 - 03:13 PM
Triedit.dll is in c:\program files (x86)\common files\microsoft shared\triedit\
I don't know how this is possible, the file got copied anyway, despite the error message.
bthport.sys is nowhere to be found (except in c:\windows\driver cache\amd64\driver.cab).this was before I manually extracted it to c:\windows\system32\drivers\
strmdll.dll is located in c:\windows\syswow64
wstrmdll.dll is located in c:\windows\system32
The files are different, I compared their hashes. both are version 4.10.3938.
PD: Anyway, I wouldn't trust that registry entry, there were a LOT less entries than the amount of updates installed.
and, finally, here it is hfslip.cmd from sourcess\AMD64\SVCPACK
Edited by jvidal, 15 November 2009 - 03:27 PM.
Posted 15 November 2009 - 04:04 PM
If you see that the malware tool isn't installed, please post your svcpack/hfslip.cmd file.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users