[icecubes]

Hello,

I am making an unattended installation DVD for 8 different computers and total more then 100 computers. Everything is working fine except the driver installation. I integrated the drivers with the Vista Tool 1.0. When the setup is complete the New Hardware Found wizard pops up. This is not what I want, I want to install the drivers automatically.

When I click Browse my computer for software and choose my harddrive to search for driver software, the driver is found and install perfectly. This means that the driver is available. The drivers are not digital signed.

Does anyone know how to fix ?

[sp00f]

Thats not the tools fault, sounds like a bad driver

[icecubes]

sp00f, on Mar 24 2008, 06:31 PM, said:

Thats not the tools fault, sounds like a bad driver

No the drivers are ok. I can perfectly install them manually. But not automatically

[sp00f]

icecubes, on Mar 24 2008, 10:09 PM, said:

sp00f, on Mar 24 2008, 06:31 PM, said:

Thats not the tools fault, sounds like a bad driver

No the drivers are ok. I can perfectly install them manually. But not automatically

wich tool you used exactly?

[icecubes]

sp00f, on Mar 24 2008, 11:26 PM, said:

wich tool you used exactly?

This one:

http://vistapacks.si...VISTA-TOOLS.rar

I found this tool in another topic where you recommended this tool. It is itegrating the drivers because I can find them back on my harddrive. But the problem is that vista pops up the New Hardware Found wizard, that's not what I need. I want to install the drivers without a touch.

[sp00f]

Thats the same tool i use, and it works fine for me.
I use this driverpack http://www.ryanvm.ne...opic.php?t=5032

[icecubes]

sp00f, on Mar 25 2008, 03:13 PM, said:

Thats the same tool i use, and it works fine for me.
I use this driverpack http://www.ryanvm.ne...opic.php?t=5032

Hey Spoof/Muiz why is that driverpack offline , I already tried to download it before but it's still offline. Does it include drivers for fingerprint sensors etc?

[MAVERICKS CHOICE]

Does not appear to include drivers for fingerprint sensors. Just back up yours from Vista & re inject into the wim.

[icecubes]

MAVERICKS CHOICE, on Mar 25 2008, 08:29 PM, said:

Does not appear to include drivers for fingerprint sensors. Just back up yours from Vista & re inject into the wim.

Yeah that's exactly what I already did. I installed Vista on the machines, installed the drivers, extracted the drivers with Drivermax, and finally itegrated them with the Vista. I also tested with vLite. A couple minutes ago I extracted the drivers with Chilly Device Driver Backup and injected them with the Vista Tool 1.0. I am now installing on a machine. I hope that it 'll work because in couple months I have to roll out. I have everything completed except the drivers and the NetInstall part.

I keep you guys updated.

[MAVERICKS CHOICE]

icecubes, on Mar 26 2008, 06:20 AM, said:

MAVERICKS CHOICE, on Mar 25 2008, 08:29 PM, said:

Does not appear to include drivers for fingerprint sensors. Just back up yours from Vista & re inject into the wim.

Yeah that's exactly what I already did. I installed Vista on the machines, installed the drivers, extracted the drivers with Drivermax, and finally itegrated them with the Vista. I also tested with vLite. A couple minutes ago I extracted the drivers with Chilly Device Driver Backup and injected them with the Vista Tool 1.0. I am now installing on a machine. I hope that it 'll work because in couple months I have to roll out. I have everything completed except the drivers and the NetInstall part.

I keep you guys updated.

Man sounds like its all happening for ya, good to see.

This post has been edited by MAVERICKS CHOICE: 26 March 2008 - 03:07 AM

[icecubes]

Mmmm still the same do I miss a stepp in my XML. I really don't know but I keep searching.

[icecubes]

Ok I am few steps further now. I had to boot into audit mode and then I can install the drivers. Now I have a problem there, it pops up a box with the following message:

Windows can't verify the publisher of the driver software.

In other words, the drivers are not digital signed. Does anyone knows how I can do a silent install, I don't need these annoying messages.

Also like other people here, before going in audit mode, setup shutdown the computer.

Anyone a solution for these problems?

[sp00f]

icecubes, on Mar 26 2008, 08:37 PM, said:

Ok I am few steps further now. I had to boot into audit mode and then I can install the drivers. Now I have a problem there, it pops up a box with the following message:

Windows can't verify the publisher of the driver software.

In other words, the drivers are not digital signed. Does anyone knows how I can do a silent install, I don't need these annoying messages.

Also like other people here, before going in audit mode, setup shutdown the computer.

Anyone a solution for these problems?

Only use signed drivers

[icecubes]

sp00f, on Mar 26 2008, 08:51 PM, said:

Only use signed drivers

That would solve my problems, problem is where to find signed drivers ? I have 8 different HP machines , they include drivers like Fingerprint sensor, card readers, interfaces and so on ...

[MAVERICKS CHOICE]

icecubes, on Mar 27 2008, 06:59 AM, said:

sp00f, on Mar 26 2008, 08:51 PM, said:

Only use signed drivers

That would solve my problems, problem is where to find signed drivers ? I have 8 different HP machines , they include drivers like Fingerprint sensor, card readers, interfaces and so on ...

I generally use the factory or oem drivers only, you're right can be difficult to find the good signed ones. Vista is more pickier than previously.

[icecubes]

MAVERICKS CHOICE, on Mar 26 2008, 09:31 PM, said:

I generally use the factory or oem drivers only, you're right can be difficult to find the good signed ones. Vista is more pickier than previously.

I download the drivers from HP, I don't understand why they don't sign their drivers, especiaaly the business series.

[MAVERICKS CHOICE]

icecubes, on Mar 27 2008, 07:48 AM, said:

MAVERICKS CHOICE, on Mar 26 2008, 09:31 PM, said:

I generally use the factory or oem drivers only, you're right can be difficult to find the good signed ones. Vista is more pickier than previously.

I download the drivers from HP, I don't understand why they don't sign their drivers, especiaaly the business series.

So far done both Toshiba & Acer laptops with no dramas following extracting & saving the working drivers.

[icecubes]

I am going to sign these drivers myself. I really have to get everything automated as much as possible.

I'll let you guys now. I am going to start workting now.

[icecubes]

Everything worked fine, next step is to implement BitLocker.

Grtz

[h0dg3s]

icecubes, on Mar 31 2008, 01:40 PM, said:

Everything worked fine, next step is to implement BitLocker.

Grtz

How did you sign the drivers? I'm having a similar issue.