BDA (Tv tuner support) on Server 2008/R2

7 Pages
←
1
2
3
4
5
→
Last »

You cannot start a new topic
You cannot reply to this topic

BDA (Tv tuner support) on Server 2008/R2 DISCONTINUED FROM MSFN (New Link for help and support available)

#41 valorisa

Group: Members
Posts: 5
Joined: 28-July 03

Posted 30 May 2008 - 12:05 PM

Hello shahed26,

I have the same error than terrorix with kstvtune.ax and ksxbar.ax by using your manual method. I'm using Win2k8 datacenter X86 on a Dell Latitude C510/C610. What do you advice to me ? Your recently modified automatic method ?

An idea please. My hardware TV tuner : PCTV DVB-T stick solo and PCTV Dual DVB-t Diversity Stick.

Other question : a pack codec like K-Lite codec is really necessary or optional ?

Thanks for your patience.

valorisa

This post has been edited by valorisa: 30 May 2008 - 12:11 PM

#42 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 30 May 2008 - 12:15 PM

valorisa, on May 30 2008, 07:05 PM, said:

try my new recently modified installers. the errors that you and terrorix had with kstvtune.ax and ksxbar.ax are fixed. these errors were caused by a few "mui" files missing that must be present in the source folder.
just try the new installer and it should work this time.
btw make sure your read the instructions before installing found inside the "bdaforserver"

edit: codec pack is optional. but remember server has no mpeg2 codecs or anything, so viewing live tv picture will require you to install one later. anyways thats a optional so its fine without a codec pack

This post has been edited by shahed26: 30 May 2008 - 12:18 PM

#43 valorisa

Group: Members
Posts: 5
Joined: 28-July 03

Posted 30 May 2008 - 12:32 PM

Again thanks shahed26. I try this as soon as possible and I will let you know the result.

valorisa

This post has been edited by valorisa: 30 May 2008 - 12:33 PM

#44 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 02 June 2008 - 05:32 PM

Updated:

Recent Changes:

Quote

03/06/08
-Fixed x64 Directory source file copy error (BDA was not working on x64 systems due to source files not being copied in the right directory)
-Now installer uses x64 version of "regsvr32.exe" to register x64 source files, and x86 version of "regsvr32.exe" to register x86 source files
29/05/08
-Added x64 support
-Made corrections to x86 installer
-Added more filters that were missing from previous installer pack
-Fixed "kxsbar.ax, kstvtune.ax invalid errors

#45 Dr.Sun

Group: Members
Posts: 2
Joined: 04-June 08

Posted 04 June 2008 - 06:39 AM

hello
i'm on win2k8 ent 64bit
downloaded last version.
still getting ksxbar.ax errors
and still can't see tv

please help

#46 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 04 June 2008 - 08:33 AM

Dr.Sun, on Jun 4 2008, 01:39 PM, said:

hello
i'm on win2k8 ent 64bit
downloaded last version.
still getting ksxbar.ax errors
and still can't see tv

please help

Did you follow the instructions properly?
what language version of server your using? (it must be en-US)
Did you grab all the files from vista by running "get bda files.bat"?

#47 Dr.Sun

Group: Members
Posts: 2
Joined: 04-June 08

Posted 04 June 2008 - 09:06 AM

shahed26, on Jun 4 2008, 06:33 PM, said:

Dr.Sun, on Jun 4 2008, 01:39 PM, said:

hello
i'm on win2k8 ent 64bit
downloaded last version.
still getting ksxbar.ax errors
and still can't see tv

please help

Did you follow the instructions properly?
what language version of server your using? (it must be en-US)
Did you grab all the files from vista by running "get bda files.bat"?

yes
yes
yes

all went good, but the "regsvr32 ksxbar.ax"
can't do this even manually

can you tell me exactly names of files needed to register ksxbar.ax and kswdmcap.ax? (excluding theirselves of course and ksxbar.ax.mui and kswdmcap.ax.mui)

#48 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 04 June 2008 - 05:29 PM

Dr.Sun, on Jun 4 2008, 04:06 PM, said:

shahed26, on Jun 4 2008, 06:33 PM, said:

Dr.Sun, on Jun 4 2008, 01:39 PM, said:

hello
i'm on win2k8 ent 64bit
downloaded last version.
still getting ksxbar.ax errors
and still can't see tv

please help

Did you follow the instructions properly?
what language version of server your using? (it must be en-US)
Did you grab all the files from vista by running "get bda files.bat"?

Hi, after doing a clean install of server 2008 ent x64, i realized that "kstvtune.ax and ksxbar.ax" are not required to register, and it cant be registered as well. The whole point is that them 2 ax files needs to be present in syswow64 and system32 directory, so when you launch any tv applications it uses these 2 files for its purpose. They cant be registered even on vista, i tried registering, but it will not register as the whole point is your tv application to access these 2 files only for your tv app to work.
Just run the "BDA.inf" from bda folder the directX 9 version, and restart to see if your tv card works, if it don't then the only solution i would recommend is do a clean install and run my setup pack.
Hope this helps

#49 Mercury_22

Advanced Member

Group: Members
Posts: 477
Joined: 26-November 04

Posted 07 June 2008 - 06:23 AM

Hi!
Just a little tweack for your bat files If you want them to run no matter the location of bdaforserver folder !
-> So NO NEED FOR

Quote

and it will extract as "bdaforserver" to your windows
installation drive,thats were the setup MUST be runned from, otherwise it wont work
IMPORTANT:IN ORDER FOR EVERYTHING TO WORK, RUN THE SETUP FROM WERE YOUR WINDOWS
IS INSTALLED (C:) OTHERWISE IT WONT WORK (THATS WERE IT EXTRACTED)

add

Quote

cd /d %0\..

after

Quote

@echo off

and replace

Quote

%systemdrive%\bdaforserver\

with

Quote

"../

(also add quotes " at the end of the line)

For example

Quote

@echo off

cd /d %0\..

copy %systemroot%\system32\bdaplgin.ax "../source\x64\System32"
copy %systemroot%\system32\kstvtune.ax "../source\x64\System32"
copy %systemroot%\system32\ksxbar.ax "../source\x64\System32"
copy %systemroot%\system32\Mpeg2Data.ax "../source\x64\System32"
copy %systemroot%\system32\mpg2splt.ax "../source\x64\System32"
copy %systemroot%\system32\MSDvbNP.ax "../source\x64\System32"
copy %systemroot%\system32\MSNP.ax "../source\x64\System32"
copy %systemroot%\system32\MSVidCtl.dll "../source\x64\System32"
copy %systemroot%\system32\en-US\MSVidCtl.dll.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\kstvtune.ax.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\kswdmcap.ax.mui "../source\x64\System32"
copy %systemroot%\system32\en-US\ksxbar.ax.mui "../source\x64\System32"
copy %systemroot%\system32\psisdecd.dll "../source\x64\System32"
copy %systemroot%\system32\psisrndr.ax "../source\x64\System32"
copy %systemroot%\system32\VBICodec.ax "../source\x64\System32"
copy %systemroot%\system32\vbisurf.ax "../source\x64\System32"
copy %systemroot%\system32\WSTPager.ax "../source\x64\System32"

copy %systemroot%\SysWOW64\bdaplgin.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\kstvtune.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\ksxbar.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\Mpeg2Data.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\mpg2splt.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\MSDvbNP.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\MSNP.ax "../source\x64\SysWOW64'
copy %systemroot%\SysWOW64\MSVidCtl.dll "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\MSVidCtl.dll.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\kstvtune.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\kswdmcap.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\en-US\ksxbar.ax.mui "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\psisdecd.dll "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\psisrndr.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\VBICodec.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\vbisurf.ax "../source\x64\SysWOW64"
copy %systemroot%\SysWOW64\WSTPager.ax "../source\x64\SysWOW64"

exit

Good luck with your work !

#50 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 07 June 2008 - 06:42 AM

Mercury_22, on Jun 7 2008, 01:23 PM, said:

Hi!
Just a little tweack for your bat files If you want them to run no matter the location of bdaforserver folder !
-> So NO NEED FOR

Quote

add

Quote

cd /d %0\..

after

Quote

@echo off

and replace

Quote

%systemdrive%\bdaforserver\

with

Quote

"../

(also add quotes " at the end of the line)

For example

Quote

Good luck with your work !

Mercury_22, Thank you very much for this tweak. I will update my installer pack, and will have a quick test.

Thank you for this tip

#51 doobyub

Group: Members
Posts: 2
Joined: 20-June 08

Posted 20 June 2008 - 03:42 PM

helo shahed,

where is the installer pack? i download badforserver.exe when i double click it. it creates a folder called bda in c:\, it does not have a setup in there?
am i dong it right.

thanks bro.

#52 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 21 June 2008 - 11:06 AM

doobyub, on Jun 20 2008, 10:42 PM, said:

Instructions on how to install are inside the "bdaforserver" folder

#53 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 22 June 2008 - 06:56 AM

Updated installer pack. Fixed a major bug

#54 don786

Group: Members
Posts: 1
Joined: 22-June 08

Posted 22 June 2008 - 07:22 AM

It worked like a charm. Thank you shahed26. :thumbup

This post has been edited by don786: 22 June 2008 - 07:22 AM

#55 haja0011

Group: Members
Posts: 3
Joined: 13-July 08

Posted 13 July 2008 - 08:53 AM

Hi,

I have an analog WinTV-PVR USB2 Model 24019.

I used your Setup, got the files from Vista UlimateSP1, and copied the sources on Windows Server 2008.
Then I ran the setup. The setup said that is all ok, restarts, then after starting there was the massege with the new drivers, I canceled it all and restarts my PC.

Than I tried Wintv V.6 and Winamp with TV Plugin but no one works. The driver of my Wintv are installed.
The message in WinTV V6 is the same how before I installed the files: "Cannot access TV Tuner, please check the unit is connected and the drivers are correctly instakked.(0)"
I checked the drivers in device manager there is all ok.

I use Windows Server 2008 X64 Englisch with German location and German keyboard. The same with Vista. Desktop enhancement were installed.

Does this only works with DVB?
Have somebody the same WinTV and get it to work?

Do you have any idea were the problem and how I can get it to work?
Is the problem the German location Or/And keyboard??

Thanks for any help.

Greetings
Jan

This post has been edited by haja0011: 13 July 2008 - 08:56 AM

#56 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 13 July 2008 - 09:06 AM

haja0011, on Jul 13 2008, 03:53 PM, said:

Unfortunately it does not work with analogue tv, (as far as i know). Many people who have tried this setup pack had analogue and reported not working. It only works with digital DVB.

Btw there are some know problems with apps like wintv and winamp tv plugins, my advice is to use a better 3rd party tv software.
The best one is dvbviewer (not free) http://www.dvbviewer.com/en/index.php
or you can try dvbdream (the best free tv app) http://www.dvbdream.org/
alternative progdvb http://www.progdvb.com/

These are the ones that works best with tv cards under server x86/x64

analogue might work these tv app mentioned above, but never tested before

This post has been edited by shahed26: 13 July 2008 - 09:07 AM

#57 haja0011

Group: Members
Posts: 3
Joined: 13-July 08

Posted 13 July 2008 - 09:32 AM

Hi,

thanks for your answer. I tried DVB Dream with BDA but it hasn't worked.

Then I must hope that Microsoft support it in future, but the chances are not so good

.
TV Tuner on a server OS arent rampant

Greetings
Jan

#58 haja0011

Group: Members
Posts: 3
Joined: 13-July 08

Posted 13 July 2008 - 09:42 AM

Hi shahed26,

do you know any DVB-T card/stick which will work with Windows Server 2008 X64? in our town we can reveive DVB-T with indoor aerial.

Thank for your help.

Greetings
Jan

#59 shahed26

Advanced Member

Group: Members
Posts: 462
Joined: 07-July 07

Posted 13 July 2008 - 09:56 AM

haja0011, on Jul 13 2008, 04:42 PM, said:

Hi shahed26,

do you know any DVB-T card/stick which will work with Windows Server 2008 X64? in our town we can reveive DVB-T with indoor aerial.

Thank for your help.

Greetings
Jan

Quote

QUOTE (grsc3p0 @ May 3 2008, 08:53 PM) *
I would like to say a big thanks to shahed26 for the BDA guide. thumbup.gif

My Terratec DT USB XS Diversity Digital Tuner is now working fine in Windows 2008 server!
Dual tuners working OK, everything looks stable and normal, no errors in the OS logs.

Software : TerraTec Home Cinema 5.73.00 beta
Driver : Cinergy DT USB XS Diversity - BDA Driver 3.12.0.0 (for XP and Vista)
Filters : Vista Codec Package 4.6.4
Hardware (PC) : Lenovo T60 Laptop !

Windows 2008 is now FULLY configured to look and behave like Vista. I'm impressed.

OR YOU CAN VISIT THIS SITE, FOR MORE INFO ON WHICH CARDS WORKED
http://www.hauppauge.co.uk/board/showthrea...4850&page=5

Am currently using hauppauge hvr4000 dvb-s2 card, and i have no problems

This post has been edited by shahed26: 13 July 2008 - 09:57 AM

#60 Serge3leo

Group: Members
Posts: 1
Joined: 13-July 08

Posted 13 July 2008 - 10:02 AM

Hi shahed26,

shahed26, on Jun 5 2008, 03:29 AM, said:

Hi, after doing a clean install of server 2008 ent x64, i realized that "kstvtune.ax and ksxbar.ax" are not required to register, and it cant be registered as well.

Lines of "\Setup For x64\Get BDA Vista Files.bat":
move %systemdrive%\bdaforserver\source\x64\System32\kstvtune.ax %systemroot%\system32
move %systemdrive%\bdaforserver\source\x64\System32\ksxbar.ax %systemroot%\system32
move %systemdrive%\bdaforserver\source\x64\SysWOW64\kstvtune.ax %systemroot%\SysWOW64
move %systemdrive%\bdaforserver\source\x64\SysWOW64\ksxbar.ax %systemroot%\SysWOW64

Needed and right?

But Lines:
%systemroot%\SysWOW64\regsvr32 /s %systemroot%\SysWOW64\kstvtune.ax
%systemroot%\SysWOW64\regsvr32 /s %systemroot%\SysWOW64\ksxbar.ax
%systemroot%\system32\regsvr32 /s %systemroot%\system32\kstvtune.ax
%systemroot%\system32\regsvr32 /s %systemroot%\system32\ksxbar.ax

Not needed and bugged. Because this DLL don't have DllRegisterServer() entry.

Any register error of kstvtune.ax&ksxbar.ax must ignored. That right?
--
Sorry for my best English