wiak Posted June 2, 2008 Share Posted June 2, 2008 Well i can get my service pack slipstreamed with out no prob.. BUT thats a but, i do get issues when im in a vmware , first im using the english version before svcpack my version is : 6.0.6000.16386 after service pack its : 6.0.6001.18000 and i got my file from ms.. i have 2 versions of the svcpack with different file sizes and tried them both.My issues are when vista is installing via vmware just before it gets to the desktop i get the following:-=> INSTALLING SERVICE PACK: 3 OF 3 100% COMPLETE.DO NOT TURN OFF THE COMPUTER.Then the computer just keeps rebooting and showing the same message over and over and rebooting.. i did see something flash on the screen for a half second about. System even failed to log ????? thats the part i missed..ScOOt3ri have the same stage 3 errorit keeps reboots itself and sounds like the manual Sp1 updateam using a vlited vista x64 retail used vLite 1.1.6 Final, the other versions worked finethe problems comes after running windows update Link to comment Share on other sites More sharing options...
G_DuB24 Posted July 17, 2008 Share Posted July 17, 2008 Well i can get my service pack slipstreamed with out no prob.. BUT thats a but, i do get issues when im in a vmware , first im using the english version before svcpack my version is : 6.0.6000.16386 after service pack its : 6.0.6001.18000 and i got my file from ms.. i have 2 versions of the svcpack with different file sizes and tried them both.My issues are when vista is installing via vmware just before it gets to the desktop i get the following:-=> INSTALLING SERVICE PACK: 3 OF 3 100% COMPLETE.DO NOT TURN OFF THE COMPUTER.Then the computer just keeps rebooting and showing the same message over and over and rebooting.. i did see something flash on the screen for a half second about. System even failed to log ????? thats the part i missed..ScOOt3ri have the same stage 3 errorit keeps reboots itself and sounds like the manual Sp1 updateam using a vlited vista x64 retail used vLite 1.1.6 Final, the other versions worked finethe problems comes after running windows updatei had the same error. tried it 3 times before i realized that i was trying to slipstream the 32bit sp1 into my 64bit sp1. make sure u have the right update. the tutorial is the for 32 bit (x86) vista sp1 slipstream. hope this helps i am using vista ultimate 64 bit Link to comment Share on other sites More sharing options...
malibu Posted July 17, 2008 Share Posted July 17, 2008 i have the same stage 3 errorit keeps reboots itself and sounds like the manual Sp1 updateam using a vlited vista x64 retail used vLite 1.1.6 Final, the other versions worked finethe problems comes after running windows updateI get this error, even when using v1.2 beta.I'm using a vLited Vista x32 with SP1 (pre-integrated from Microsoft) disk, and as described the problem only occurs after having run windows update for the first time. Link to comment Share on other sites More sharing options...
LaLinea Posted August 3, 2008 Share Posted August 3, 2008 I cannot get SP1 to slipstream.I get following message: "Failed. No changes were saved"I'm using latest version of Vlite.Any Ideas what it might be?I got the same error on several hardware. So I tried to use a new installation of my vista x86 ultimate (version 6.0.6000.16386) without sp1 and without any virus-scanner exept the vista defender. I installed the newest waik and the vlite 1.2 beta. i have about 20GB free on my working drive. the slipstream fails with the error "Failed. No changes were saved".i used a german vista x64. is there any idea, where the problem is?greetings LaLinea Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now