everything went well until i tried to install it. i changed boot priority to the usb in bios. Pressed Esc on boot, selected my usb drive to boot from. selected the 1st TXT option. it loads XP installation (the normal blue screen that says windows setup at the top). then all of a sudden it crashes and i get BSOD that says the following:
A problem has been detected and windows has been shut down to prevent damage
to your computer.
If this is the first time you've seen this Stop error screen,
restart your computer. If this screen appears again, follow
Check to make sure any new hardware or software is properly installed.
If this is a nw installation, ask your hardware or software manufacturer
for any windwos updates you might need.
If probelms contuine, disable or remove any newly installed hardware
or sfotware. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then select
*** STOP: 0x0000006F (0xC00000034, 0X00000000, 0X00000000, 0X00000000)
i dont no where the problem occured, maybe something i did in nLite or while creating the usb boot.
ive tried using 2 different usb thumb drivers - Verbatim Store n' Go 512mb and PNY Attaché 2gb both with the same error.
ive searched this forums for answers without finding any, so sorry if theres already a post about this.
any ideas on how to fix this?
if no one finds a way im thinking of 2 other ways to try to install xp, either use a full install of XP instead of a nLited version or use a USB-HDD (which is an external drive right?)
Edited by Jerry_03, 20 April 2008 - 12:41 AM.