[ZaForD]

Hi TC,

While testing out HFSLIP v2.0 I notced something strange.
The .CMD file I have in the HFSVCPACK folder didn't work.
After looking into it abit more, I found that the .CMD file was on the 'Root' of the partition I was using HFSILP v2.0 on [D:\].
It had no extension and was called 'SVCPACK'

I'm doing another test now, to see if it happens again.


---Edit---
Yep, same thing again.
This time I had a good look at what was going on.
It seems as though the error happens while copying the .CMD file.
Instead of being copied the the '\Sourcess\i386\svcpack' folder it gets copied to the '\' folder and renamed SVCPACK.

Its entry in the 'svcpack.inf' is there and it works great if I copy the .CMD to the '\Sourcess\i386\svcpack' folder by hand.

Maybe a 'Typo' in the script

Attached File(s)

•  HFSLIP.zip (2.76K)
  Number of downloads: 19

This post has been edited by ZaForD: 29 June 2008 - 08:40 PM

[Tomcat76]

Thanks. This should be fixed now.

[TechMonkey]

Me again! (Edited from earlier to clarify and with more testing results)

80630a, during gui-mode copy, can't find file RSOP.MOF

With only IE7 and required, like so:

Files in your HF folder:
IE7-WindowsXP-x86-enu.exe

Files in your HFCABS folder:
ieaccess.cab
wbemoc.cab

Files in your HFSVCPACK folder:

Files in your HFSVCPACK_SW1 folder:

Files in your HFTOOLS folder:
HFSLIP32_PRE_SWFlash9_v1.zip
modifyPE.exe

Files in your REPLACE folder:

Only one missing file: RSOP.MOF

Compressed version is, of course, in i386. (Verified it's not actually in the $NT.whatever.LS? by interrupting the install after it gave the error).
It is, however, listed in TXTSETUP:

rsopW.chm = 100,,,,,,,21,0,0,rsop.chm
rsopsnpW.chm = 1,,,,,,,21,0,0,rsopsnp.chm
rsop.mfl	 = 1,,,,,,,35,0,0	 
rsop.mof	 = 100,,,,,,,35,0,0	 
rsop.msc	 = 1,,,,,,,2,0,0
rsopprov.exe = 1,,,,,,,2,0,0

I will follow up with my original set of selected patches and missing files.

P.S. I've been using the low-compression "SPX" option, as that seems much faster than the "DRIVER.CAB" option. Any chance that could make a difference?

From your previous replies I just realized network-based installs aren't really supported, or aren't first priority, so double thanks.
(Hmm, I wonder if my boss would approve a donation to you guys?)

This post has been edited by TechMonkey: 03 July 2008 - 02:39 PM

[TechMonkey]

Followup:

Going back to my original batch of updates, it's the following that are missing, in the order they are asked for (just a couple seconds after "installing networking":

rsop.mof
wscenter.mof
rsop.mtl

As an aside - since my most pressing need for this is just to get a basic image built to be re-deployed, is there any reason I can't provide these files manually and get on with my life? (Or does problem of these missing files point to there being some other, hidden issues?)

				 This file is automatically generated by HFSLIP
						HFSLIP is for personal use only
						 Copyright(C) TommyP 2005-2008

============================HOW TO REPORT A PROBLEM============================

	   If running into problems, refer to http://hfslip.org/support.html

	  HFSLIP support forum: http://msfn.org/board/index.php?showforum=129

===============================================================================

Host OS		 - Windows XP

HFSLIP Version  - 2.0.0pre-alpha, build 80630a

HFSLIP Path	 - C:\temp\HFSLIP\

OS in SOURCESS  - Windows XP Professional SP3 English

MSIE Version	- IE7

Drivers		 - No updates

===============================================================================

Files in your HF folder:
IE7-WindowsXP-KB950759-x86-ENU.exe
IE7-WindowsXP-x86-enu.exe
rootsupd.exe
windows-kb890830-v1.42.exe
WindowsXP-KB905474-ENU-x86-standalone.exe
WindowsXP-KB950760-x86-ENU.exe
WindowsXP-KB950762-x86-ENU.exe
WindowsXP-KB951698-x86-ENU.exe

Files in your HFCABS folder:
ieaccess.cab
OGAControl.cab
opuc4.cab
wbemoc.cab

Files in your HFSVCPACK folder:

Files in your HFSVCPACK_SW1 folder:

Files in your HFTOOLS folder:
HFSLIP32_PRE_SWFlash9_v1.zip
modifyPE.exe

Files in your REPLACE folder:

===============================================================================

New binaries slipstreamed by HFSLIP:
HFSLIPOC.INF
HFSLP101.INF
HFSLP102.INF
HFSLP103.INF
HFSLP104.INF
ieproxy.dll
hmmapi.mui
iedw.mui
iexplore.mui
advpack.mui
ieframe2.mui
msfdsbs.dll
msfdsync.exe
wfxdocob.exe
FeedDisc.wav
InfoBar.wav
NavStart.wav
PopupBlk.wav
htmliec.mui
inetcpl.mui
msfdsbs.mui
wfxdocob.mui
admparse.mui
extmgr.mui
icardie.mui
ieakeng.mui
ieaksie.mui
ieakui.mui
iedkcs32.mui
ieframe.mui
iepeers.mui
iernonce.mui
iesetup.mui
ieui.mui
inseng.mui
licmgr10.mui
mshtml.mui
mshtmled.mui
mshtmler.mui
msrating.mui
occache.mui
urlmon.mui
webcheck.mui
wininet.mui
ie4uinit.mui
ieunatt.mui
mshta.mui
msfdsbs.mof
msfeeds.mof
webcheck.ini
occache.ini
inetcorp.iem
inetset.iem
HFSLP105.INF
HFSLIPSD.INF
sdesktop.scf
HFSLP106.INF
OGA.dll
icardie.dll
icrav03.rat
idndl.dll
IE7Eula.rtf
ieapfltr.dat
ieapfltr.dll
ieframe.dll
iertutil.dll
iesetup2.dll
ieudinit.exe
ieui.dll
imgutil2.dll
inetcpl2.cpl
inseng2.dll
mrt.exe
msfeeds.dll
mshtml2.dll
msratng2.dll
nlsdl.dll
normaliz.dll
normidna.nls
normnfc.nls
normnfd.nls
normnfkc.nls
normnfkd.nls
opuc.dll
pngfilt2.dll
spmsg.dll
ticrf.rat
webchck2.dll

===============================================================================
HFSLIP run time: 8m01s

This post has been edited by TechMonkey: 03 July 2008 - 02:51 PM

[TechMonkey]

TechMonkey, on Jul 3 2008, 01:50 PM, said:

Followup:

Going back to my original batch of updates, it's the following that are missing, in the order they are asked for (just a couple seconds after "installing networking":

rsop.mof
wscenter.mof
rsop.mtl

As an aside - since my most pressing need for this is just to get a basic image built to be re-deployed, is there any reason I can't provide these files manually and get on with my life? (Or does problem of these missing files point to there being some other, hidden issues?)

So, though I verfied that said files are there on the HD before the reboot from textmode, burning same files to a CD (well, technically an .iso, as this was a VM for the latest round of testing) and pointing the installer to those worked!?! I wonder if the files are getting deleted on the restart, or perhaps it's a wierd permissions/ownership issue?

[Tomalak]

Hello TC76,

The Windows Search 4.0 plugin is not working for me. After installation of Windows I can call the search window and the new GUI shows up, but it doesn't find files and instead only says that the "indexing is not working properly" (or something like that, and only have the German version). Indeed the indexing service is set to start mode "manual" and not running. But starting it manually, or setting the service to "automatic", or trying a re-boot inbetween, didn't bring any change.
If necessary I can post a screenshot. What other information would be useful for debugging this, which logfile do you want to see?

And am I the only one with this problem, was someone able to successfully slipstream Windows Search 4.0? Any help appreciated, thanks!

Kind regards,
Tomalak