har02052 Posted July 11, 2008 Share Posted July 11, 2008 Like many of you on this forum I reformat/reinstall regularly and often and so we have come here in an effort to make this process quicker. My questions is this: is there a program or a way that I can create an image of a complete system that I can then make a bootable dvd that would put that image back onto the hard drive? I want to install XP and all of my programs and tweak it just the way that I like and then essentially make an image of all the files on that drive and compress them into a package that can be written onto a clean drive and the system would be in the exact state as when I made the image. For my setup I have one raptor drive for my OS and programs, all of my documents and media files are saved on other drives. I just want to put an image onto a DVD that I can boot from and then reformat the raptor drive and put the image back onto the drive when I want to start over fresh. Is there a way to do this? Link to comment Share on other sites More sharing options...
ozone_pilot Posted July 11, 2008 Share Posted July 11, 2008 Like many of you on this forum I reformat/reinstall regularly and often and so we have come here in an effort to make this process quicker. My questions is this: is there a program or a way that I can create an image of a complete system that I can then make a bootable dvd that would put that image back onto the hard drive? I want to install XP and all of my programs and tweak it just the way that I like and then essentially make an image of all the files on that drive and compress them into a package that can be written onto a clean drive and the system would be in the exact state as when I made the image. For my setup I have one raptor drive for my OS and programs, all of my documents and media files are saved on other drives. I just want to put an image onto a DVD that I can boot from and then reformat the raptor drive and put the image back onto the drive when I want to start over fresh. Is there a way to do this?Acronis True Image comes to mind Link to comment Share on other sites More sharing options...
Silvereyes Posted July 13, 2008 Share Posted July 13, 2008 There are several tools which can do this but Acronis True Image iscertainly the best of them at present.http://www.acronis.com/ Link to comment Share on other sites More sharing options...
Oleg_II Posted July 13, 2008 Share Posted July 13, 2008 (edited) Ghost and DriveImage Pro/DeployCenter (both DOS versions) can be scriptable to make automatic system image install.Not sure (and very doubt) Acronis can automatically restore images I personally prefer to use Grub4DOS for booting with virtual DOS diskette image with DeployCenter that automatically restores my backup system image from another partition on hard disk (much-much quicker than using CD).PS Use search, some instructions about this were published here before Edited July 13, 2008 by Oleg_II Link to comment Share on other sites More sharing options...
Silvereyes Posted July 13, 2008 Share Posted July 13, 2008 Hmm...Pop in a CD and have it overwrite your system partition without any furtherintervention.That's a really, really clever idea Seriously, he didn't mention have the tool do it automagically, just the abilityto do what most of us have been doing for many years, system image backup andrestore.I suggested True Image as I feel it's the best choice for a novice who has neverhad any experience in drive/partition imaging before.The documentation for True Image Home is fairly clear. Creating the rescue CDfor backing up and restoring a system image is simply a matter of running themedia creation tool and selecting the options required. Burn it, pop it in thedrive, reboot and you're ready to go.It supports the full range of imaging options - disk/partition to and from imagefile, disk and partition. It supports writing and reading image files fromCD/DVD burners, USB hard disks and flash drives, network shares etc. It'scheaper than both of those you mention and a lot simpler than grope4dros Seriously, what's not to like for a novice? Link to comment Share on other sites More sharing options...
Oleg_II Posted July 14, 2008 Share Posted July 14, 2008 (edited) Hmm... Pop in a CD and it shows you warning that it is going to overwrite system partion with backup: YES or NO. And if no decision made just load system from HDD.I think it's really, really clever idea Seriously, he didn't mention have the tool do it automagically, just the abilityto do what most of us have been doing for many years, system image backup andrestore.Seriously, have you read the subject of this topic? I suggested True Image as I feel it's the best choice for a novice who has neverhad any experience in drive/partition imaging before.The documentation for True Image Home is fairly clear. Creating the rescue CDfor backing up and restoring a system image is simply a matter of running themedia creation tool and selecting the options required. Burn it, pop it in thedrive, reboot and you're ready to go.If we speaking of NON-AUTOMATIC way, Ghost and DeployCenter (and much more appz you can find here) are the same - burn it, pop it in the drive, reboot and you'are ready to go It supports the full range of imaging options - disk/partition to and from imagefile, disk and partition. It supports writing and reading image files fromCD/DVD burners, USB hard disks and flash drives, network shares etc.So Ghost and DeployCenter can do ALL the same.It's cheaper than both of those you mention and a lot simpler than grope4drosDo you ever have a look at the price of Ghost? It's about 19 dollars if I'm not mistaken (I was wrong, but how much for Acronis then? Yes, DeployCenter will be more expensive, I agree.And about Grub4DOS. It's free. Well, it may be difficult for a novice but didn't you just suggested reading Acronis manual? Why not to read manual for Grub4DOS or just ask here? PS And you can obtain one more quality app that has the same features as Acronis with Universal Restore (how much does it cost?) for less money. And with really good other features too - for example, it's made with PE and it's much easier to add mass storage drivers to it then to Acronis products. It's ShadowProtect:ShadowProtect Desktop Edition 3 provides the following benefits: * Supports Windows 2000, XP and Vista. * Bare metal recovery of Windows desktops and laptops in minutes. * Restore or migrate backup images to and from physical systems and virtual environments (P2V, V2P and V2V). * Hardware independent restore of backup images to different systems (P2P). * Schedule automatic full and incremental backups. * Bootable recovery CD provides automatic hardware detection and network support. * Simple view to quickly recover files and folders or update backup images. * Compress and encrypt backup images for efficiency and security. * Save backup images to USB, Firewire, NAS, SAN or any network location. Edited July 14, 2008 by Oleg_II Link to comment Share on other sites More sharing options...
Oleg_II Posted July 14, 2008 Share Posted July 14, 2008 (edited) Symantec Ghost Solution Suite 2.5 for 5-24 Users is USD 31 (for which you get both - Ghost and DeployCenter and a lot more usefull tools with very detailed manuals).PS Well, that may be a bit more expensive then one licence for Acronis Home edition, but you get professional tools with scripting support (needed for acomplishing automatic tasks) that work nearly on all possible hardware (in absolutely most cases there is no need for special drivers like with Acronis Home, which is based on Linux, and newer hardware). And if you really want CHEAPer choice you can check the list a gave above for even free tools But without automatic making or restoring images ability Edited July 14, 2008 by Oleg_II Link to comment Share on other sites More sharing options...
Silvereyes Posted July 14, 2008 Share Posted July 14, 2008 Whoa!!! Steady on there Oleg. This is a forum not a battlefield.All the original poster wanted was a simple answer to a simple question. Not alecture on the Rights of Man. And probably not a debate on the merits of varioustools either so I shall refrain from commenting any further on the matter exceptto post those prices you asked about.Ghost $69.99Ghost Solution Suite $39.20 per license (min 5 - $196)Acronis True Image 11 Home $49.99PS: I would hate to think your objection was simply because Acronis use an'embedded' Linux solution Link to comment Share on other sites More sharing options...
bj-kaiser Posted July 14, 2008 Share Posted July 14, 2008 and you still forgot one thing:imagex.exewhich is easily scriptable (because it is a commandline program) and 'free'. free as in, you need to download the 1 GB WAIK and have to build a Windows PE image.Or you can use Acronis. I have a TrueImage 10 License, but I didnt really use it. However, IIRC you can create a rescue-cd/dvd with a system image which will be automatically restored (after you answer 1 question "do you really want to do so"). However, I'd recommend to read the helpfile of the demo or other support material or send a mail to acronis to verify this. Link to comment Share on other sites More sharing options...
Oleg_II Posted July 14, 2008 Share Posted July 14, 2008 (edited) SilvereyesWell, I gave my variant of simple answer then But you start commenting it so I had to explain my point of vew further As for prices...Ghost v14 Amazon.com - USD 53.49 (absolutely new with free shipment). It is possible to buy it even cheaper.Ghost Solution Suite 2.5 VioSoftware.com - USD 156 (5 licences, each USD 31.2), it's much better because you are getting: Ghost v11 (works even with newest SATA disks), DeployCenter (including command line versions for DOS, NT and PE environment, works fine with newest HDD too), PQDISK (command line version of Partition Magic), Virtual Boot Environment (let you reboot Windows 9x, Windows 2000, XP directly to recovery program would it be DeployCenter or Ghost or ANY program that use 1.4MB-2.8MB floppy disk - you don't need to have floppy disks, only their images are used - didn't try boot it on Vista though) and a lot more useful programs. And the best of it - both Ghost v11 and DeployCenter 5.7 are scriptable so let you create automatic tasks of making backup images and restoring them As for IMAGEX.EXE - Yep, it can be used too. It needs more knowledge to create good PE disk, but it is possible too. Edited July 14, 2008 by Oleg_II Link to comment Share on other sites More sharing options...
Silvereyes Posted July 14, 2008 Share Posted July 14, 2008 Interesting variation on 'simple', particularly the way you picked my commentapart with a fine toothed comb.The point I was trying to make was that the tools you suggested might be bitmore than he needed or wanted at this stage. Scripting and/or remote deploymentis fine if you have a large number of machines to maintain but if you only havetwo or three it's really not worth the effort (or the cost).I use PXE boot and remote deployment at work but with only three machines athome it's easier to just pop the CD in and reboot.As for the prices, well yes, you can usually find the same thing cheaperelsewhere if you look for it. Link to comment Share on other sites More sharing options...
Oleg_II Posted July 14, 2008 Share Posted July 14, 2008 (edited) Simple was here, a bit before picking your comment And "picking" happened as a result of your comment (re-read the sequence of postings, please).Scripting works fine on stand-alone computers (notebooks, for example) without PXE boot and remote deployment. A simple script (in Ghost case it's just a few keys after GHOST.EXE) let you accomplish some task: make an image of a choosen partition, deploy an image to a predefind partion, etc. Think of it as like WINNT.SIF in Unattended installation (in fact, much simpler) or silent install of some hotfixes through a batch file, or just employing a REG file (when you run an EXE or an REG file it asks you some questions like "You are going to install something, are you sure?", but when you run them with some keys they installs silently - in other words automatically or unattended).I think it's worth to spend half of an hour to read just a couple of pages in the manual and learn a few simple keys so that be able to run a program that auto create or auto deploy an image of a system (or any other) partition just in a few minutes without using CD or other media (and using them also as well if needed).And about poping in CD - you can do it with any image creating app, even without them - use any PE disk (make it with WinBuilder or BartPE) and copy (or archeive, better with tool like IMAGEX.EXE contents of a system partiton to another partition or media (USB, CD, etc.). Simple enough, no money involved Edited July 14, 2008 by Oleg_II Link to comment Share on other sites More sharing options...
Oleg_II Posted July 14, 2008 Share Posted July 14, 2008 (edited) Just an example of a script for Ghost that will restore system backup image SYSBACK.GHO from folder RESTORE to the first partition (this script was ment to work from CD with backup image):Ghost -nousb -clone,mode=pload,src=restore/sysback.gho:1,dst=1:1 -crcignore -sure -rbYes, it seems a bit difficult for the first time. But when you read manual and start understanding the meaning of keys after word "Ghost" it will become easy.It's a bit different with DeployCenter - a separete script file is needed. And you run app with this line in AUTOEXEC.BAT:PQImgCtr /CMD=rescue.txt /IMG=\\.\disk1.part4\restore\sysback.pqi /SNCThat means: restore backup image SYSBACK.PQI from folder RESTORE on disk F (4th partition of HDD) according to the instructions in RESCUE.TXT. It's a simple TXT file like this:SELECT DRIVE 1SELECT PARTITION 1SELECT IMAGE 1RESTOREREBOOTThat means: take first partition in backup image and restore it to the first partition of the first HDD, then reboot the computer. Edited July 15, 2008 by Oleg_II Link to comment Share on other sites More sharing options...
Oleg_II Posted July 14, 2008 Share Posted July 14, 2008 Some info about creating bootable CD/DVD with Ghost backup image. Link to comment Share on other sites More sharing options...
cluberti Posted July 14, 2008 Share Posted July 14, 2008 Depending on your requirements, FOG might be a valid option too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now