Jump to content

Welcome to MSFN Forum
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. This message will be removed once you have signed in.
Login to Account Create an Account



Photo

How to install Windows from USB- WinSetupFromUSB with GUI


  • Please log in to reply
2120 replies to this topic

#826
Rotbard

Rotbard
  • Member
  • 9 posts
  • Joined 18-January 10

Try running dosdev before and after using showdrive ot mountstorePE

I just recreated the stick.
changes:
added dosdev.exe to txtsetup.sif
added the showdrive.exe call to setup.cmd. Positioned it right after the mountvol.exe check/call (before the "set TAGFILE")

After a new started setup, the system again reboots twice and ends up by GLOBALROOT\??\\WINSETUP.......
When i start the cmd and run mnt i get the same result as before.
When i use dosdev.exe i get the following result:
C:  =  \Device\HarddiskVolume1  [Fixed]
D:  =  \Device\CdRom0  [CDRom]
Y:  =  \Device\harddisk20\partition1; \Device\harddisk19\partition1; \Device\harddisk18\partition1; \Device\harddisk17\partition1; \Device\harddisk16\partition1; \Device\harddisk15\partition1; \Device\harddisk14\partition1; \Device\harddisk13\partition1; \Device\harddisk12\partition1; \Device\harddisk11\partition1; \Device\harddisk10\partition1; \Device\harddisk9\partition1; \Device\harddisk8\partition1; \Device\harddisk7\partition1; \Device\harddisk6\partition1; \Device\harddisk5\partition1; \Device\harddisk4\partition1; \Device\harddisk3\partition1; \Device\harddisk2\partition1; \Device\harddisk1\partition1; \Device\harddisk0\partition1 [NoRootDir]
When i try to Mount them with mnt.exe the only one which works is:
\Device\harddisk0\partition1
and thats the C: of the HDD.

I think the Y: mapping comes from the for-loop in the setup.cmd:
FOR /L %%G IN (0,1,20) DO (
mnt.exe Y: \device\harddisk%%G\partition1
dir Y:%TAGFILE% > nul 2>&1 && set CDDRIVE=Y:
if defined CDDRIVE goto :CDDRIVE_found
)
For some reason it does not overrive the mappings, no it extends it?!?

EDIT:
Okey, i changed the for-loop to:
FOR /L %%G IN (0,1,20) DO (
mnt.exe Y: \device\harddisk%%G\partition1
dir Y:%TAGFILE% > nul 2>&1 && set CDDRIVE=Y:
if defined CDDRIVE goto :CDDRIVE_found
mnt.exe -u Y: 
)
If i'm not wrong, the last line in the loop runs only, if the TAGFILE was not found. If it is found, the goto jumps out of the loop.
Now the mnt.exe and dosdev show only the C: and D: Drives.
So i think the stick isn't found at all. Maybe a driver problem?

Edited by Rotbard, 25 January 2010 - 08:50 AM.



How to remove advertisement from MSFN

#827
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,567 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag
Well, no.

I mean the idea was to try using showdrive.exe or mountstorePE INSTEAD of mnt.exe.

mnt.exe needs to be given "arguments", showdrive.exe or mountstorePE will IF they find a device not mounted to a drive letter to mount it.

jaclaz

#828
cdob

cdob

    MSFN Expert

  • Member
  • PipPipPipPipPipPip
  • 1,000 posts
  • Joined 29-September 05

So i think the stick isn't found at all. Maybe a driver problem?

Which drivers are at hard disk after first reboot?
Can you do a favour and upload file system.sav too, again the version after first reboot? I'm rather curious about USB settings.

#829
soarinblue

soarinblue
  • Member
  • 3 posts
  • Joined 25-January 10
Hi, you are doing a great work!

I tried to install XP En 32bit with it from the 4gb usb drive, but it failed. I had read the FAQ and searched some information from the topic. Unfortunately, they can't solve my problem.

The problem: it went to the setup text mode of the first step, but it got the BSOD 0x0000007b when the system displayed "starting windows" at the bottom status bar.

I had tried: 1, to add the modified NTDETECT.COM to the USB drive root. 2, to integrate the mass storage drivers to the XP source using driverpacks tool. Because they are prompted in the FAQ.

My PC information: XP 32bit, Intel desktop board D845GBV, BIOS RG84510A (support USB boot)

What I am doing: USB stick drive 4GB hyundai, WinSetupFromUSB with GUI 1.0 beta, XP En 32bit( I had tried two sources, both failed. )

Something else: It works for BartPE. I mean that BartPE is added to the USB drive and BartPE can work from usb booting using the 1.0 beta4. And, the 1.0 beta4 is placed the G hard drive which is primary one, but not active. Does it matter?

Looking forward to your responses! Thanks a lot!

soarinblue

Here is the log file:

REMOVED by jaclaz

Edited by jaclaz, 26 January 2010 - 10:46 AM.


#830
Rotbard

Rotbard
  • Member
  • 9 posts
  • Joined 18-January 10

Which drivers are at hard disk after first reboot?
Can you do a favour and upload file system.sav too, again the version after first reboot? I'm rather curious about USB settings.


Uhm, the first question is a good one. I have no idea :blushing:
If you need the *.drv files from the system32 folder, i can upload thm, too.

For the system.sav file, i created 2 zip files wich contain the system.sav and default.sav from the windows/system32/config folder.
One direct after the textmode-setup. Without reboot.
The second after the 1. reboot.
I rebooted a second time, but then the there were no *.sav files in the config folder.
Attached File  after_textmode.7z   84.65KB   10 downloads
Attached File  1_reboot.7z   84.76KB   10 downloads

Thanks again for the help! :)

#831
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,567 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

Here is the log file: ( Some of it are deleted as the file size is over 200K. How can I pass the full file to you?)


@soarinblue

I do understand that most of the board is dedicated to help not-very-expert people and that one should be very gentle with them.

As well I perfectly know that "common sense" is one of the least common things around.

You BLOCKED the present Board thread by posting in three subsequent posts three logs by copying and pasting them inside your posts! :realmad:

For the record, first one is 1,590,262 bytes long, second one is 1,592,324 and the third one (since you "reduced" it as being bigger than 200Kb) is a mere 43,502 bytes.

Please find ATTACHED, NOT, and I mean NOT pasted inside a post, your three files COMPRESSED in a .7z archive, totaling 66,781 bytes.

Next time, please ask how to send a file BEFORE posting two of them, each over 1.5 Megabytes! :angry:

It took me more than half an hour and had to use all the tricks of the trade +1 to be able to access the thread and fix the mess you created.

jaclaz

Attached Files



#832
VegetaSSJ5

VegetaSSJ5
  • Member
  • 1 posts
  • Joined 26-January 10
hi all! this is my first post on this forum. :)

i used this program (ver. 1.0 beta 4) to make a bootable usb pen to install windows 2000. i would install this os on a old laptop without the cdrom and without bios support to usb boot.

i used a floppy with plop boot manager to make the boot from usb pen and it works perfectly. the laptop boots from usb pen and the installation starts fine. but before the installation come to the screen to select the install partition, i got a blue screen with the error "inaccessible boot device".

i used the fat16 file system to format the usb pen, to prevent incompatibility issues.

someone can help me??

(sorry for my bad english... :whistle: )

#833
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,567 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

the laptop boots from usb pen and the installation starts fine. but before the installation come to the screen to select the install partition, i got a blue screen with the error "inaccessible boot device".

i used the fat16 file system to format the usb pen, to prevent incompatibility issues.

You don't have a problem with the USB booting, you have a problem with booting in Protected Mode, when text setup "switches" to it.

Sometimes it can be solved by using a modified NTDETECT.COM, FAQ's (Frequently Asked Questions) are there exactly for this scope, check #3 here:
http://www.msfn.org/...qs-t116766.html

They should be actually called FGA (Frequently Given Answers) but call them how you like, they should be ALWAYS READ before asking what's already covered in them :whistle:

And BTW ;):

someone can help me??

Yes. :)
http://homepages.tes...no-answers.html

jaclaz

#834
cdob

cdob

    MSFN Expert

  • Member
  • PipPipPipPipPipPip
  • 1,000 posts
  • Joined 29-September 05

If you need the *.drv files from the system32 folder

Does exist a file system32\drivers\usbstor.sys at hard disk?

For the system.sav file

Thank's so far. Unfortunately this enhance the confusion, that's more fun :)

[HKEY_LOCAL_MACHINE\textmode\ControlSet001\Enum\PCI\VEN_8086&DEV_27CC&SUBSYS_81791043&REV_01\3&11583659&0&EF]
"Service"="usbehci"

[HKEY_LOCAL_MACHINE\textmode\ControlSet001\Enum\USB\ROOT_HUB20\4&353844c7&0]
"Service"="usbhub"

[HKEY_LOCAL_MACHINE\textmode\ControlSet001\Enum\USB\Vid_152d&Pid_0602\00000000000000000001]
"Service"="usbstor"

USB controller, USB hub and USB storage drivers are loaded.
ControlSet001\Enum and ControlSet001\Services seems nice.
Maybe a timing problem, BIOS disconnect/reconnect USB at boot.

Can you confirm another part?
Boot several times to USB, (textmode, first reboot, second reboot, just for fun a third one).
Does exist a file reboot.1 and reboot.2 at hard disk?
press shift F10 and run
reg query hklm\system\currentcontrolset\control\criticaldevicedatabase\USB#CLASS_09
Does exist the USB#CLASS_09 entry?

#835
Rotbard

Rotbard
  • Member
  • 9 posts
  • Joined 18-January 10

Does exist a file system32\drivers\usbstor.sys at hard disk?

Yes, along withsome more usb*.sys files.
*8023 ; *camd ; *camd2 ; *d ; *ehci ; *hub ; *intel ; *port ; *uhci

Maybe a timing problem, BIOS disconnect/reconnect USB at boot.

To test if theres a problem with the stick and on/off switchings while booting, i unpluged the stick and rebooted.
When the windows logo appeared i pluged the stick in. Now one LED of the stick is on but in the setup i still end up in the same error.
(it was a stupid test, i know ;) )

Does exist a file reboot.1 and reboot.2 at hard disk?

Yes they are generated like defined in setup.cmd.

exist the USB#CLASS_09 entry?

Yes, it exists with 2 entries:
ClassGUID   REG_SZ   {36FC9E60-C465-11CF-8056-444553540000}
Service   REG_SZ   usbhub


#836
ilko_t

ilko_t

    MSFN Addict

  • Super Moderator
  • 1,722 posts
  • Joined 06-December 06
  • OS:none specified
  • Country: Country Flag

...The problem: it went to the setup text mode of the first step, but it got the BSOD 0x0000007b when the system displayed "starting windows" at the bottom status bar.

I had tried: 1, to add the modified NTDETECT.COM to the USB drive root...

Add it to the ISO file in WINSETUP directory. Use UltraISO to replace it directly, or extract contents of ISO, replace NTDETECT.COM and recreate the ISO:
mkisofs.exe -v -iso-level 4 -volid ""WINSETUP"" -R -o "L:\WINSETUP\XPpSP3.ISO" "G:\Path_To_The_Extracted_ISO\"
Or simply replace ntdetect.com in your source and recreate the USB stick. :ph34r:

BTW- similar problem was posted and resolved just one page pack in this thread, a little reading never hurts ;)

@VegetaSSJ5- Doesn't this machine support USB boot? If it doesn't I doubt this method will work, there is an valid ARC path needed to the USB stick, or Setup fails with 0x7B when stick is mapped to non-existent drive.

Install Windows from USB, boot Linux, multiboot and a lot more with WinSetupFromUSB


#837
cdob

cdob

    MSFN Expert

  • Member
  • PipPipPipPipPipPip
  • 1,000 posts
  • Joined 29-September 05

Yes, along withsome more usb*.sys files.
*8023 ; *camd ; *camd2 ; *d ; *ehci ; *hub ; *intel ; *port ; *uhci

I like this machine, destroyed five years of USB knowledge.
So far CriticalDeviceDatabase settings, drivers settings and driver files did work.

Time to invent a new approach: early PNP
Unfortunately without own testing hardware.
Can you do another test? Boot to Shift-F10 prompt and run

@echo offsetlocal EnableExtensions EnableDelayedExpansion:USB_PNP.cmd:: Batch to load USB devices - XP 32bit:: by cdob  v0.01set Seed=%random%%random%%random%set Seed=0x%Seed:~,8%reg.exe add "HKLM\SYSTEM\WPA\Pnp" /f /t REG_DWORD /v "Seed" /d %Seed%reg.exe query "HKLM\SYSTEM\WPA\Pnp"set Control=HKLM\SYSTEM\CurrentControlSet\Controlreg.exe add "%Control%\Session Manager\WPA\Pnp" /f /t REG_DWORD /v "Seed" /d %Seed%reg.exe add "HKLM\SOFTWARE\Microsoft\Driver Signing" /f /t REG_BINARY /v "Policy" /d 00000000reg.exe add "HKLM\SOFTWARE\Microsoft\Non-Driver Signing" /f /t REG_BINARY /v "Policy" /d 00reg.exe add "HKLM\Software\Policies\Microsoft\Windows NT\Driver Signing" /f /t REG_DWORD /v "BehaviorOnFailedVerify" /d 0x0rem set driver signing policydsigning.exe:: reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup" /f /t REG_DWORD /v "LogLevel" /d 0xFFFFffffrem PNP USB devices and attach drive letter to USB flash driverem no RunDll32.exe Syssetup.dll,UpdatePnpDeviceDriversrem devcon.exe [url="http://support.microsoft.com/kb/311272"]http://support.microsoft.com/kb/311272[/url]echo. &echo USB controller and USB HUBfor %%a in (PCI\CC_0C0300 PCI\CC_0C0310 PCI\CC_0C0320 USB\ROOT_HUB USB\ROOT_HUB20) do ( devcon.exe hwids "%%a" | find.exe "%%a" && devcon.exe install %SystemRoot%\inf\usbport.inf "%%a")echo. &echo USB storage devicerem no hwids defined for USB storage devicefor %%a in (06 05 02 06 05 02) do (  devcon.exe install %SystemRoot%\inf\usbstor.inf "USB\Class_08&SubClass_%%a&Prot_50")rem USB keyboard and mousedevcon.exe install %SystemRoot%\inf\usb.inf "USB\COMPOSITE"devcon.exe install %SystemRoot%\inf\input.inf "USB\Class_03"devcon.exe install %SystemRoot%\inf\msmouse.inf "HID_DEVICE_SYSTEM_MOUSE"devcon.exe install %SystemRoot%\inf\keyboard.inf "HID_DEVICE_SYSTEM_KEYBOARD"rem attach drive letter to USB hard disk rem ShowDrive [url="http://bbs.wuyou.com/viewthread.php?tid=116177"]http://bbs.wuyou.com/viewthread.php?tid=116177[/url]ShowDrive.exerem view drivesMountVol.exe
addional applications:
dsigning.exe, driversigning part of floppy image http://www.msfn.org/...howtopic=137714
devcon.exe http://support.microsoft.com/kb/311272
ShowDrive.exe http://bbs.wuyou.com....php?tid=116177

#838
Solivagus

Solivagus

    Newbie

  • Member
  • 24 posts
  • Joined 13-September 05
I am super happy to admit stupidity here ladies and gentlemen, the tool works fine for loading the Windows XP and Windows 7 install, I can even get BartPE/DOS to boot.

The problem is with BartPE/DOS I can't get any of the drives other than the ramdrive made and the usb stick to show, I am not really the sort to want to learn the entire documentation just to add a little functionality. I only need DOS for the odd firmware flash and the BartPE for the odd tool i.e. backup/file management if a drive got corrupted or whatever.

I assumed that all drives would show by default but i've tried fiddling with a few commands, looked through some forums/google but the commands I add still don't let me see ALL my drives.


I am obviously missing something REALLY simple here but I don't know what it is. The partition is NTFS, i've tried fat32. I load DOS as a loaded floppy image and BartPE just how it was installed with this tool.


tl;dr
How can I get BartPE/DOS to see all the drives on my computer?

#839
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,567 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

How can I get BartPE/DOS to see all the drives on my computer?


You go in BIOS and (if you have this setting availble) turn "AHCI" off or set "IDE compatibility mode" on (or some similar settings).

Most probably you have SATA disk drive(s) and you need to access them in "IDE compatibility mode" OR to add to the build the appropriate SATA drivers.

DOS, while being able to see the HD, won't however be able to access volumes in it formatted with the NTFS filesystem, unless you add to it a NTFS filesystem driver.

jaclaz

#840
Solivagus

Solivagus

    Newbie

  • Member
  • 24 posts
  • Joined 13-September 05
That makes BartPE work fine but DOS still doesn't see anything, is there any way to use the sata drivers in the windows xp/windows 7 sources to load for the DOS/BartPE so I don't have to fiddle with BIOS?

I don't need NTFS read/write to be honest but if anyone could quickly show me the menu.lst entries required to achieve this then my super usb will be complete. or any extra files that I may need to find

I've been looking through lots of posts/forums etc. but my brain be fried and it is just driving me bonkers

Edited by Solivagus, 30 January 2010 - 06:47 PM.


#841
ilko_t

ilko_t

    MSFN Addict

  • Super Moderator
  • 1,722 posts
  • Joined 06-December 06
  • OS:none specified
  • Country: Country Flag
@cdob

I was thinking what triggers USB drives to be mounted when doing msdosinitiated=1 installs. I guess on the nice machine in question ~BT/~LS install will go through.

Attached is comparison between such install and small ISO install with no USB settings changes right after text mode. I've already tried replicating some of the settings from msdosinitiated=1 install, doing them before entering GUI mode, but went nowhere. There must be something which triggers setup device to be mounted.
Might be worth thinking a bit in this direction?

Attached Files


Install Windows from USB, boot Linux, multiboot and a lot more with WinSetupFromUSB


#842
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,567 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

That makes BartPE work fine but DOS still doesn't see anything, is there any way to use the sata drivers in the windows xp/windows 7 sources to load for the DOS/BartPE so I don't have to fiddle with BIOS?

Yes, you have to add the SATA drivers to the PE build.
Depending if you are creating a "universal" PE or a specific one for that machine, you may want to choose between adding only a specific driver, or using the driverpacks, or use UNIATA:
http://www.msfn.org/...opic=141451&hl=

I don't need NTFS read/write to be honest but if anyone could quickly show me the menu.lst entries required to achieve this then my super usb will be complete. or any extra files that I may need to find

There is nothing to change in menu.lst.
It's inside your DOS .img that you need to add a NTFS driver.

You have two options for R/W and another two for Read only:
NTFS4DOS from Avira and NTFS4DOS IFS from Paragon:
http://www.boot-land...?showtopic=8479
http://www.boot-land...?...c=10292&hl=
http://www.boot-land...?showtopic=6865

jaclaz

#843
Rotbard

Rotbard
  • Member
  • 9 posts
  • Joined 18-January 10

I like this machine, destroyed five years of USB knowledge.
So far CriticalDeviceDatabase settings, drivers settings and driver files did work.

I tested another PC with different Hardware and same result. On this PC i'm 100% sure it worked with the 0.2.3 stable version of Winsetupfromusb and the same usb-stick. By the way, the Image i use is a nLite one (sorry i didn't told earlier, i simply forgotten it).
There is a hotfix package and a driverpack added to the image. See the "last session.ini" Attached File  Letzte_Session.7z   6.01KB   4 downloads
Since this image was working on the 0.2.3 version i hope its not part of the problem :unsure:
Just to ensure its realy not the nlite image, i will create a new one tomorrow without any extra packages.

Time to invent a new approach: early PNP

I don't find the dsigning.exe in the post. :( in which package is it hidden, pls? Sorry! ;)

I tested the batch without the dsinging.exe but i only get
Device node created. Install is complete drivers are updated...
Updating drivers for PCI/CC_0C0320 from C:\Windows\inf\usbport.inf.
devcon failed.

USB\ROOT_HUB\4&1C5B443C&0
...
And some more of this messages.

#844
cdob

cdob

    MSFN Expert

  • Member
  • PipPipPipPipPipPip
  • 1,000 posts
  • Joined 29-September 05

There must be something which triggers setup device to be mounted.

Good idea. However I don't have a answer currently, I'll keep this in memory. Maybe there is a answer in future.

Just to ensure its realy not the nlite image, i will create a new one tomorrow without any extra packages.

Try remove the chipset driverpack.

I don't find the dsigning.exe in the post. :( in which package is it hidden, pls? Sorry! ;)

Topic 137714 XP_INST_v04.7z.

Attached again: driversigning.c and dsigning.exe.

devcon failed.

PNP failed, most likely because of signing failed.

Attached Files



#845
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,567 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

Topic 137714 XP_INST_v04.7z.

Link:
http://www.msfn.org/...howtopic=137714

jaclaz

#846
Rotbard

Rotbard
  • Member
  • 9 posts
  • Joined 18-January 10

Topic 137714 XP_INST_v04.7z.

Hmpf, i downloaded this package, but was unable to look into the img file. Sorry and thanks :)

I retested the old image and run the usb_pnp.cmd right after 1. reboot. (deactivated the second one in the setup.cmd) The skript says "successfull installed" on every step. No "devcon failed" messages anymore! But in the end, the driveletter was still missing.
I didn't find it with showdrive, mnt.exe, mountvol.exe or diskpart.
BUT after a reboot the driverletter appeared as U: !

I decided to change the setup.cmd once more.
Here is the "beginning" of the used setup.cmd:

@echo offsetlocal EnableExtensions EnableDelayedExpansionif not exist reg.exe (echo reg.exe not found echo reg.exe not found >> %SystemRoot%\winsetup.log)if not exist findstr.exe (echo findstr.exe not found echo findstr.exe not found >> %SystemRoot%\winsetup.log)if not exist mountvol.exe (echo mountvol.exe not found echo mountvol.exe not found >> %SystemRoot%\winsetup.log) else (echo mountvol.exe output: >> %SystemRoot%\winsetup.logmountvol.exe >> %SystemRoot%\winsetup.log)rem XPpSP3 string is dynamically changed by WinSetupFromUSB when prepariung sourceset TAGFILE=\WINSETUP\XPpSP3rem Load PNPif not exist loadpnp.1 (call usb_pnp.cmdecho PNP Loaded > loadpnp.1)if exist mountvol.exe (for /f "tokens=1 delims=: " %%? in ('mountvol.exe ^|find ":\"') do (  dir %%?:%TAGFILE% > nul 2>&1 && set CDDRIVE=%%?:if defined CDDRIVE goto :CDDRIVE_found)) else (FOR %%h IN (U V W X C D E F G H I J K L M N O P Q R S T Y) DO (IF EXIST "%%h:%TAGFILE%" (SET CDDRIVE=%%h:goto :CDDRIVE_found)))echo no %TAGFILE% drive foundecho no %TAGFILE% drive found >> %SystemRoot%\winsetup.log...
The rest of the setup.cmd is original.

The content of the usb_pnp.cmd is:
@echo offsetlocal EnableExtensions EnableDelayedExpansion:USB_PNP.cmd:: Batch to load USB devices - XP 32bit:: by cdob  v0.01set Seed=%random%%random%%random%set Seed=0x%Seed:~,8%reg.exe add "HKLM\SYSTEM\WPA\Pnp" /f /t REG_DWORD /v "Seed" /d %Seed%reg.exe query "HKLM\SYSTEM\WPA\Pnp"set Control=HKLM\SYSTEM\CurrentControlSet\Controlreg.exe add "%Control%\Session Manager\WPA\Pnp" /f /t REG_DWORD /v "Seed" /d %Seed%reg.ee add "HKLM\SOFTWARE\Microsoft\Driver Signing" /f /t REG_BINARY /v "Policy" /d 00000000reg.exe add "HKLM\SOFTWARE\Microsoft\Non-Driver Signing" /f /t REG_BINARY /v "Policy" /d 00reg.exe add "HKLM\Software\Policies\Microsoft\Windows NT\Driver Signing" /f /t REG_DWORD /v "BehaviorOnFailedVerify" /d 0x0rem set driver signing policydsigning.exe:: reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup" /f /t REG_DWORD /v "LogLevel" /d 0xFFFFffffrem PNP USB devices and attach drive letter to USB flash driverem no RunDll32.exe Syssetup.dll,UpdatePnpDeviceDriversrem devcon.exe [url="http://support.microsoft.com/kb/311272"]http://support.microsoft.com/kb/311272[/url]echo. &echo USB controller and USB HUBfor %%a in (PCI\CC_0C0300 PCI\CC_0C0310 PCI\CC_0C0320 USB\ROOT_HUB USB\ROOT_HUB20) do ( devcon.exe hwids "%%a" | find.exe "%%a" && devcon.exe install %SystemRoot%\inf\usbport.inf "%%a")echo. &echo USB storage devicerem no hwids defined for USB storage devicefor %%a in (06 05 02 06 05 02) do (devcon.exe install %SystemRoot%\inf\usbstor.inf "USB\Class_08&SubClass_%%a&Prot_50")rem USB keyboard and mousedevcon.exe install %SystemRoot%\inf\usb.inf "USB\COMPOSITE"devcon.exe install %SystemRoot%\inf\input.inf "USB\Class_03"devcon.exe install %SystemRoot%\inf\msmouse.inf "HID_DEVICE_SYSTEM_MOUSE"devcon.exe install %SystemRoot%\inf\keyboard.inf "HID_DEVICE_SYSTEM_KEYBOARD"
(I just deleted the last few lines)

The setup runs as normal, reboots once in gui-mode and finaly finds my usb-stick and finishes the installation! :thumbup
Thanks! You are great! :angel

-----------------------------------------------------------
And here comes the second point on my totry-list
-----------------------------------------------------------

Try remove the chipset driverpack.

I created a new image with nLite. But i added the driverpackages (Chipset, CPU, LAN, MassStorage, MassStorage-Textmode) with the DPsBASE Tool AFTER the nLite-setup.
Howto: http://users.telenet...e/Eng_tut6b.htm
With this new image, the installation works! :thumbup It's a bit slow in the driver loading part but who cares?
Sorry i made you so much work and finaly a new image was a solution. :blushing:
Btw, in the old image the driverpack was integrated with nLite. That was a stupid idea, like the howto says. Strange it worked with the 0.2.3 Setup. :wacko:
EDIT: Change the codes to codeboxes - postshrinking :D

Edited by Rotbard, 02 February 2010 - 07:54 AM.


#847
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,567 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag
Happy :) to see that the problem is solved, though I would like to understand WHAT :w00t: are the differences between the "nlite integration" and the "plain integration" that do "trigger" a malfunctioning with latest version but does not with 0.2.3 :blink: .

JFYI,
Try open the .ima inside XP_INST_v04.7z (XP_INST.IMA) with 7-zip.... :whistle:

;)

jaclaz

#848
Rotbard

Rotbard
  • Member
  • 9 posts
  • Joined 18-January 10

I would like to understand WHAT :w00t: are the differences between the "nlite integration" and the "plain integration" that do "trigger" a malfunctioning with latest version but does not with 0.2.3 :blink: .

I only remember, for the 0.2.3 i had a few days of trying to get it working as i want. But never with any driver problems. Far from it, when installation was complete, i nearly never had to install any additional drivers.
Biggest problem were my own "runonce" setups which were not starting after setup.
Hm.... maybe some old drivers made it into the winXP-source-setup or maybe some got deleted. In my early trys i was not very clean in recreating a fresh XP-source everytime i created a new nLite image. :blushing:

Try open the .ima inside XP_INST_v04.7z (XP_INST.IMA) with 7-zip.... :whistle:

My 7-zip (4.65 x64) is unable to open the .IMG file.
I get an error "Can't open XP_INST.IMA as archiv." Did we find a x64 bug of 7-zip? ;)
Ok that's the wrong board for this type of error :D

#849
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,567 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

Try open the .ima inside XP_INST_v04.7z (XP_INST.IMA) with 7-zip.... :whistle:

My 7-zip (4.65 x64) is unable to open the .IMG file.
I get an error "Can't open XP_INST.IMA as archiv." Did we find a x64 bug of 7-zip? ;)
Ok that's the wrong board for this type of error :D


Well, I am running (32 bit) 9.07 beta, current is 9.10 beta, I guess it's time for you to ubgrade. ;)

jaclaz

#850
fatihunaldi

fatihunaldi
  • Member
  • 1 posts
  • Joined 05-February 10
i want to learn what is the max size of iso file for stable running? using this pro?




8 user(s) are reading this topic

0 members, 8 guests, 0 anonymous users