[fatih]

ilko_t, yes I tried. I need IIS on the USB stick, actually.
I tried install from CD, not installed. I saw a "blue screen error" to GUI part of installation. I thought of doing this will solve the problem. (?? If possible GUI part install complate... with this method (select and run GUI part from another apps)...) I can not tell..
because of your software and HOWto notes, now, I have learned to install windows from the USB stick. I can install windows from USB to any netbook. Thank you very much for your help and software.

[ilko_t]

Lets say it clearly- this program is NOT (yet) intended to install Windows ON USB disk. It's purpose is to install Windows FROM USB disk.

[ilko_t]

New beta uploaded, refer to the first post for list of changes and download link.

[Jeff_newbie]

My first time trying to install XP from USB. I downloaded the latest version (Beta 3) and am giving it a try. Any advice for a new guy?

Thanks in advance.

[Jeff_newbie]

First try - After booting up with usb and then selecting "XP Setup", then selecting "First part of XPpSP3 setup from partition 0". It loaded the drivers and as soon as it said it was starting windows I got a BSOD.

I have a Sandisk Cruzer 8gb USB drive - formatted using RMPREPUSB with the following settings:
-NTFS
-Boot as HD (2 PTNS)
-Using the XP NTLDR boot options

Any ideas where to begin trouble shooting?

[Jeff_newbie]

Sorry - I forgot to upload log file.

[Jeff_newbie]

[ilko_t]

What's the error code on the blue screen? This is the important part

If it is 0x0000007B try the modified ntdetect.com :

http://www.msfn.org/...qs-t116766.html

Q3/A3

I've tried to put "codebox" tags around the log you posted, but weirdly the entire log disappeared. Please when posting such large text, put
[code-box]large text[/code-box]
around it. Remove the dash of course.

[Jeff_newbie]

Ok, I now have the ntdetect.com file on my USB and I try it again and now I have an error 19 - cannot mount selected partition.

It comes up with Booting 'First part of XP setup from partition 0'
root (hd0,0)
Filesystem type is ntfs, partition type 0x7
map --mem /Winsetup/XPpSP3.ISO (0xff)
Autodetect number-of-heads failed. Use default value 255
Autodetect sectors-per-track failed. Use default value 63
savedefault2

Error occurred while savedefault
map (hd0) (hd1)
map (hd1) (hd0)
map --hook
root (0xff)

Error 19: Cannot mount selected partition

Press any key to continue

[ilko_t]

Try reformatting it with BootIce, FAT32 or NTFS, single or multiple partitions. You'd have to experiment a bit to find out which one works in your setup. There is no "universal" set of settings.

[Ponch]

I got a big stop when trying to use last version (1.0b3) on a french XP. After 1st screen (1line; "1st and 2nd part"), I get to choose 1st or 2nd step, then when I choose 1st step, it stops with (sorry I checked, I have no log at this part of the process)
map --mem /WINSETUP/XP Édition familialeduSP3pourÉdition familiale.ISO (0xff)

Error 11: Unrecognized device string. or you omitted the required DEVICE part which should lead the filename.

I believe this is due to the accent on the E from "Édition familliale" which character does not appear on my Windows Explorer screen (it appears as a little square) in the filenames created on the sticks (both iso and directory).
I had no problem yesterday on the same files with (the much older) version 0.2.1 which is working in a totally different way.
I tried correcting the names and accordingly in Winsetup.lst but I suspect the name of the folder is badly linked somewhere as only the name of the iso is written in the winsetup.lst. Cheers.

[ilko_t]

Thanks for this, a few thins have to be corrected, I need Strings section of various other languages to be able to make it compatible.

Please post Strings section of txtsetup.sif.

Added: Attached version should do the trick, just put it alongside the old exe and run it. Please test and let me know. WinSetupFromUSB.log file would be very helpful, along with Strings section from txtsetup.sif.

Attached File(s)

•  WinSetupFromUSB_1_0_beta4.zip (436.35K)
  Number of downloads: 30

[Ponch]

this is on the original (hologram) cd before SP3 and other addons/nLite:
wks_id = "Microsoft Windows XP �dition familiale"
wks_id_vga = "Microsoft Windows XP �dition familiale [mode VGA]"
cancel_id = "Annuler l'installation de Windows XP"
9x_id = "Microsoft Windows"
Problem: it appears differently on my screen (I now see by previewing my post that it also appears differently than when I pasted the text)

Attached File(s)

•  Txtsetup_sif.jpg (12K)
  Number of downloads: 8

[ilko_t]

Do you have productname and spcdname values there?

[Ponch]

Not in txtsetup.sif. I found this in Layout.inf
cdname = "CD-ROM Windows XP �dition familiale"
productname = "Windows XP �dition familiale"
and
spcdname = "CD du Service Pack 1 pour Windows XP �dition familiale"
+this on an other cd:
spcdname = "CD du Service Pack 2 pour Windows XP �dition familiale"
You see the "É" doesn't even appear in the text files.

This post has been edited by Ponch: 01 January 2010 - 04:34 PM

[ilko_t]

Did you try beta4? The character E shouldn't cause a problem.

[voidseesaw]

I just want to post "thank you" again. Keep it up, man.

[Siginet]

I just used Beta 3... didn't notice beta 4. But for some reason all of the boot files were not placed on the root of my usb drive. They were placed in the same folder as winsetupfromusb. I tried to make a usb stick with win7... then I attempted to do the same with XP. Neither method placed the files on the root of the usb drive.

I did have a menu.lst file on the root. It also had a reference to a usb tag file... but that tag file was not on the root either.

[ilko_t]

Hmm, very weird. Can you attach WinSetupFromUSB.log ?

[Valeron]

I've just use 1.0 beta 3 to make a XP sp3 install into a SDHC card.
I simply follow the steps, format to fat32 with RMPREUSB, then make my XP SP3 setup directory into the SD card. I didn't add anything else(PE, Win7, ubcd etc.), everything is ok. But when I try install XP with it on a IBM Thinkpad R40e, the initialization step was very slow. I mean before I can choose which partition to install the system and agree the EULA, loading the driver and kernel files are very slow. Slow as like it's not working. Is it normal?
My SDHC card is capable of 20MB/s reading with big chunk. Is this problem of the usb driver or bios support?
On another PC with Sempron 2000+ and 1G ram install, the very similar situation occur. The initialization step the "The setup is inspecting your hardware configuration" step take tooooooo long to complete, the same for the driver and kernel loading stage. When install from CD-rom, it's far more faster.
Thank you.