[ilko_t]

OMEGA_ReD, on Jan 21 2010, 01:44 PM, said:

ilko_t, on Jan 15 2010, 08:17 PM, said:

What's the error code?At what stage you got it?

Did it happen on the same hardware where the other two worked fine? What's the hardware? Are the disks SATA? Do you have the drivers integrated if BIOS is in AHCI/SATA mode?

Hi ilko_t,

The BSOD stop code i got while installing Win XP pro x86 SP3 NL: 0x0000007B (0xF7916524, 0xC0000034,0x00000000,0x00000000)

Thanks!

Try the modified ntdetect.com:

http://www.msfn.org/...qs-t116766.html

You'd need to replace the one in the corresponding ISO file in WINSETUP directory, and just in case the one in I386 directory.

[OMEGA_ReD]

ilko_t, on Jan 21 2010, 11:24 PM, said:

OMEGA_ReD, on Jan 21 2010, 01:44 PM, said:

ilko_t, on Jan 15 2010, 08:17 PM, said:

What's the error code?At what stage you got it?

Did it happen on the same hardware where the other two worked fine? What's the hardware? Are the disks SATA? Do you have the drivers integrated if BIOS is in AHCI/SATA mode?

Hi ilko_t,

The BSOD stop code i got while installing Win XP pro x86 SP3 NL: 0x0000007B (0xF7916524, 0xC0000034,0x00000000,0x00000000)

Thanks!

Try the modified ntdetect.com:

http://www.msfn.org/...qs-t116766.html

You'd need to replace the one in the corresponding ISO file in WINSETUP directory, and just in case the one in I386 directory.

It worked! Thanks A LOT!

Can i use the modified WIN XP iso image to burn a install cd?
Or can the modified NTDETECT.COM only work on USB-sticks?

Thanks!

[jaclaz]

OMEGA_ReD, on Jan 22 2010, 02:00 PM, said:

Can i use the modified WIN XP iso image to burn a install cd?
Or can the modified NTDETECT.COM only work on USB-sticks?

The modified NTDETECT.COM simly "loosens" some restrictions apparently introduced in SP2, it is nothing but a SP1 version of NTDETECT.COM, so you can use it on CD as well.

jaclaz

[Rotbard]

Sorry for the late answer, i got sick last week.

Quote

This would be quite sad if isn't working. Did you amend txtsetup.sif in the ISO file, not the original one on I386 folder?

I changed the txtsetup.sif in the "Image-Source" and recreated the whole usbstick. After this i checked the iso file and setup folder on the stick. Both contain the new entry for the mnt.exe (and now for showdrive.exe, too)
I also added a "exists"-check for the mnt.exe:

if not exist mnt.exe (
echo mnt.exe not found 
echo mnt.exe not found >> %SystemRoot%\winsetup.log
) else (
FOR /L %%G IN (0,1,20) DO (
mnt.exe Y: \device\harddisk%%G\partition1
dir Y:%TAGFILE% > nul 2>&1 && set CDDRIVE=Y:
if defined CDDRIVE goto :CDDRIVE_found
)
)

to the [Winsetupfromusbfolder]\files\winsetup\setup.cmd
to ensure the mnt.exe is copied successfull. And it is.

Quote

At start of GUI please type DISKPART in the cmd window and then "list volume" and "list disk".

List disk output is only listing the HDD.
List volume shows the CDDRIVE and the C partition of the HDD.
I also tryed the "rescan" command. Nothing changed.

Quote

Try also booting from the USB disk for the second part.

Tryed with same result

Quote

Did the PC reboot couple of times at start of GUI, there a some changes made at each reboot. Did you let it reboot 2 times and see if it continues setup?

Yes i let it reboot until the error comes up. (2 gui-setup reboots)
When i boot from USB part 2 every time, i get the same result.

Quote

and a Chinese little tool, showdrive.exe:
http://cafe.naver.co...clubid=17324811

I added this to the txtsetup.sif and after ending up by the setup-error. I tryed to run it in the cmd.
But it shows nothing but a empty line.
Are there any parameters i can use? I don't understand the Chines/Japanes-symbols

By the way, like i wrote earlier, the usbstick-led is "on" until windows is booting. Then it turns "off" and stays "off".

When i boot BartPE (XP) the stick is maped as X: and works normaly.
I copied the setupact.log, setuplog.txt and winsetup.log to show them here.
Maybe there are some more information for you.
 setuplogs.7z (2.46K)
Number of downloads: 3

[jaclaz]

Rotbard, on Jan 25 2010, 11:53 AM, said:

Quote

and a Chinese little tool, showdrive.exe:
http://cafe.naver.co...clubid=17324811

I added this to the txtsetup.sif and after ending up by the setup-error. I tryed to run it in the cmd.
But it shows nothing but a empty line.
Are there any parameters i can use? I don't understand the Chines/Japanes-symbols

No, it's a "silent tool".
Read the referenced thread.
Try running dosdev before and after using showdrive ot mountstorePE:
http://www.boot-land.net/forums/index.php?...c=10169&hl=

jaclaz

[Rotbard]

jaclaz, on Jan 25 2010, 12:16 PM, said:

Try running dosdev before and after using showdrive ot mountstorePE

I just recreated the stick.
changes:
added dosdev.exe to txtsetup.sif
added the showdrive.exe call to setup.cmd. Positioned it right after the mountvol.exe check/call (before the "set TAGFILE")

After a new started setup, the system again reboots twice and ends up by GLOBALROOT\??\\WINSETUP.......
When i start the cmd and run mnt i get the same result as before.
When i use dosdev.exe i get the following result:

C:  =  \Device\HarddiskVolume1  [Fixed]
D:  =  \Device\CdRom0  [CDRom]
Y:  =  \Device\harddisk20\partition1; \Device\harddisk19\partition1; \Device\harddisk18\partition1; \Device\harddisk17\partition1; \Device\harddisk16\partition1; \Device\harddisk15\partition1; \Device\harddisk14\partition1; \Device\harddisk13\partition1; \Device\harddisk12\partition1; \Device\harddisk11\partition1; \Device\harddisk10\partition1; \Device\harddisk9\partition1; \Device\harddisk8\partition1; \Device\harddisk7\partition1; \Device\harddisk6\partition1; \Device\harddisk5\partition1; \Device\harddisk4\partition1; \Device\harddisk3\partition1; \Device\harddisk2\partition1; \Device\harddisk1\partition1; \Device\harddisk0\partition1 [NoRootDir]

When i try to Mount them with mnt.exe the only one which works is:
\Device\harddisk0\partition1
and thats the C: of the HDD.

I think the Y: mapping comes from the for-loop in the setup.cmd:

FOR /L %%G IN (0,1,20) DO (
mnt.exe Y: \device\harddisk%%G\partition1
dir Y:%TAGFILE% > nul 2>&1 && set CDDRIVE=Y:
if defined CDDRIVE goto :CDDRIVE_found
)

For some reason it does not overrive the mappings, no it extends it?!?

EDIT:
Okey, i changed the for-loop to:

FOR /L %%G IN (0,1,20) DO (
mnt.exe Y: \device\harddisk%%G\partition1
dir Y:%TAGFILE% > nul 2>&1 && set CDDRIVE=Y:
if defined CDDRIVE goto :CDDRIVE_found
mnt.exe -u Y: 
)

If i'm not wrong, the last line in the loop runs only, if the TAGFILE was not found. If it is found, the goto jumps out of the loop.
Now the mnt.exe and dosdev show only the C: and D: Drives.
So i think the stick isn't found at all. Maybe a driver problem?

This post has been edited by Rotbard: 25 January 2010 - 08:50 AM

[jaclaz]

Well, no.

I mean the idea was to try using showdrive.exe or mountstorePE INSTEAD of mnt.exe.

mnt.exe needs to be given "arguments", showdrive.exe or mountstorePE will IF they find a device not mounted to a drive letter to mount it.

jaclaz

[cdob]

Rotbard, on Jan 25 2010, 09:18 AM, said:

So i think the stick isn't found at all. Maybe a driver problem?

Which drivers are at hard disk after first reboot?
Can you do a favour and upload file system.sav too, again the version after first reboot? I'm rather curious about USB settings.

[soarinblue]

Hi, you are doing a great work!

I tried to install XP En 32bit with it from the 4gb usb drive, but it failed. I had read the FAQ and searched some information from the topic. Unfortunately, they can't solve my problem.

The problem: it went to the setup text mode of the first step, but it got the BSOD 0x0000007b when the system displayed "starting windows" at the bottom status bar.

I had tried: 1, to add the modified NTDETECT.COM to the USB drive root. 2, to integrate the mass storage drivers to the XP source using driverpacks tool. Because they are prompted in the FAQ.

My PC information: XP 32bit, Intel desktop board D845GBV, BIOS RG84510A (support USB boot)

What I am doing: USB stick drive 4GB hyundai, WinSetupFromUSB with GUI 1.0 beta, XP En 32bit( I had tried two sources, both failed. )

Something else: It works for BartPE. I mean that BartPE is added to the USB drive and BartPE can work from usb booting using the 1.0 beta4. And, the 1.0 beta4 is placed the G hard drive which is primary one, but not active. Does it matter?

Looking forward to your responses! Thanks a lot!

soarinblue

Here is the log file:

REMOVED by jaclaz

This post has been edited by jaclaz: 26 January 2010 - 10:46 AM

[Rotbard]

cdob, on Jan 25 2010, 07:10 PM, said:

Which drivers are at hard disk after first reboot?
Can you do a favour and upload file system.sav too, again the version after first reboot? I'm rather curious about USB settings.

Uhm, the first question is a good one. I have no idea
If you need the *.drv files from the system32 folder, i can upload thm, too.

For the system.sav file, i created 2 zip files wich contain the system.sav and default.sav from the windows/system32/config folder.
One direct after the textmode-setup. Without reboot.
The second after the 1. reboot.
I rebooted a second time, but then the there were no *.sav files in the config folder.
 after_textmode.7z (84.65K)
Number of downloads: 9
 1_reboot.7z (84.76K)
Number of downloads: 6

Thanks again for the help!

[jaclaz]

soarinblue, on Jan 25 2010, 09:01 PM, said:

Here is the log file: ( Some of it are deleted as the file size is over 200K. How can I pass the full file to you?)

@soarinblue

I do understand that most of the board is dedicated to help not-very-expert people and that one should be very gentle with them.

As well I perfectly know that "common sense" is one of the least common things around.

You BLOCKED the present Board thread by posting in three subsequent posts three logs by copying and pasting them inside your posts!

For the record, first one is 1,590,262 bytes long, second one is 1,592,324 and the third one (since you "reduced" it as being bigger than 200Kb) is a mere 43,502 bytes.

Please find ATTACHED, NOT, and I mean NOT pasted inside a post, your three files COMPRESSED in a .7z archive, totaling 66,781 bytes.

Next time, please ask how to send a file BEFORE posting two of them, each over 1.5 Megabytes!

It took me more than half an hour and had to use all the tricks of the trade +1 to be able to access the thread and fix the mess you created.

jaclaz

Attached File(s)

•  soarinbluelogs.7z (65.22K)
  Number of downloads: 13

[VegetaSSJ5]

hi all! this is my first post on this forum.

i used this program (ver. 1.0 beta 4) to make a bootable usb pen to install windows 2000. i would install this os on a old laptop without the cdrom and without bios support to usb boot.

i used a floppy with plop boot manager to make the boot from usb pen and it works perfectly. the laptop boots from usb pen and the installation starts fine. but before the installation come to the screen to select the install partition, i got a blue screen with the error "inaccessible boot device".

i used the fat16 file system to format the usb pen, to prevent incompatibility issues.

someone can help me??

(sorry for my bad english... )

[jaclaz]

VegetaSSJ5, on Jan 26 2010, 06:45 PM, said:

the laptop boots from usb pen and the installation starts fine. but before the installation come to the screen to select the install partition, i got a blue screen with the error "inaccessible boot device".

i used the fat16 file system to format the usb pen, to prevent incompatibility issues.

You don't have a problem with the USB booting, you have a problem with booting in Protected Mode, when text setup "switches" to it.

Sometimes it can be solved by using a modified NTDETECT.COM, FAQ's (Frequently Asked Questions) are there exactly for this scope, check #3 here:
http://www.msfn.org/...qs-t116766.html

They should be actually called FGA (Frequently Given Answers) but call them how you like, they should be ALWAYS READ before asking what's already covered in them

And BTW :

VegetaSSJ5, on Jan 26 2010, 06:45 PM, said:

someone can help me??

Yes.
http://homepages.tesco.net/J.deBoynePollar...no-answers.html

jaclaz

[cdob]

Rotbard, on Jan 26 2010, 07:55 AM, said:

If you need the *.drv files from the system32 folder

Does exist a file system32\drivers\usbstor.sys at hard disk?

Quote

For the system.sav file

Thank's so far. Unfortunately this enhance the confusion, that's more fun

Quote

[HKEY_LOCAL_MACHINE\textmode\ControlSet001\Enum\PCI\VEN_8086&DEV_27CC&SUBSYS_81791043&REV_01\3&11583659&0&EF]
"Service"="usbehci"

[HKEY_LOCAL_MACHINE\textmode\ControlSet001\Enum\USB\ROOT_HUB20\4&353844c7&0]
"Service"="usbhub"

[HKEY_LOCAL_MACHINE\textmode\ControlSet001\Enum\USB\Vid_152d&Pid_0602\00000000000000000001]
"Service"="usbstor"

USB controller, USB hub and USB storage drivers are loaded.
ControlSet001\Enum and ControlSet001\Services seems nice.
Maybe a timing problem, BIOS disconnect/reconnect USB at boot.

Can you confirm another part?
Boot several times to USB, (textmode, first reboot, second reboot, just for fun a third one).
Does exist a file reboot.1 and reboot.2 at hard disk?
press shift F10 and run

reg query hklm\system\currentcontrolset\control\criticaldevicedatabase\USB#CLASS_09

Does exist the USB#CLASS_09 entry?

[Rotbard]

cdob, on Jan 26 2010, 11:04 PM, said:

Does exist a file system32\drivers\usbstor.sys at hard disk?

Yes, along withsome more usb*.sys files.
*8023 ; *camd ; *camd2 ; *d ; *ehci ; *hub ; *intel ; *port ; *uhci

Quote

Maybe a timing problem, BIOS disconnect/reconnect USB at boot.

To test if theres a problem with the stick and on/off switchings while booting, i unpluged the stick and rebooted.
When the windows logo appeared i pluged the stick in. Now one LED of the stick is on but in the setup i still end up in the same error.
(it was a stupid test, i know )

Quote

Does exist a file reboot.1 and reboot.2 at hard disk?

Yes they are generated like defined in setup.cmd.

Quote

exist the USB#CLASS_09 entry?

Yes, it exists with 2 entries:

ClassGUID   REG_SZ   {36FC9E60-C465-11CF-8056-444553540000}
Service   REG_SZ   usbhub

[ilko_t]

soarinblue, on Jan 25 2010, 11:45 AM, said:

...The problem: it went to the setup text mode of the first step, but it got the BSOD 0x0000007b when the system displayed "starting windows" at the bottom status bar.

I had tried: 1, to add the modified NTDETECT.COM to the USB drive root...

Add it to the ISO file in WINSETUP directory. Use UltraISO to replace it directly, or extract contents of ISO, replace NTDETECT.COM and recreate the ISO:

mkisofs.exe -v -iso-level 4 -volid ""WINSETUP"" -R -o "L:\WINSETUP\XPpSP3.ISO" "G:\Path_To_The_Extracted_ISO\"

Or simply replace ntdetect.com in your source and recreate the USB stick.

BTW- similar problem was posted and resolved just one page pack in this thread, a little reading never hurts

@VegetaSSJ5- Doesn't this machine support USB boot? If it doesn't I doubt this method will work, there is an valid ARC path needed to the USB stick, or Setup fails with 0x7B when stick is mapped to non-existent drive.

[cdob]

Rotbard, on Jan 27 2010, 11:28 AM, said:

Yes, along withsome more usb*.sys files.
*8023 ; *camd ; *camd2 ; *d ; *ehci ; *hub ; *intel ; *port ; *uhci

I like this machine, destroyed five years of USB knowledge.
So far CriticalDeviceDatabase settings, drivers settings and driver files did work.

Time to invent a new approach: early PNP
Unfortunately without own testing hardware.
Can you do another test? Boot to Shift-F10 prompt and run

 
@echo off
setlocal EnableExtensions EnableDelayedExpansion

:USB_PNP.cmd
:: Batch to load USB devices - XP 32bit
:: by cdob  v0.01

set Seed=%random%%random%%random%
set Seed=0x%Seed:~,8%
reg.exe add "HKLM\SYSTEM\WPA\Pnp" /f /t REG_DWORD /v "Seed" /d %Seed%
reg.exe query "HKLM\SYSTEM\WPA\Pnp"
set Control=HKLM\SYSTEM\CurrentControlSet\Control
reg.exe add "%Control%\Session Manager\WPA\Pnp" /f /t REG_DWORD /v "Seed" /d %Seed%

reg.exe add "HKLM\SOFTWARE\Microsoft\Driver Signing" /f /t REG_BINARY /v "Policy" /d 00000000
reg.exe add "HKLM\SOFTWARE\Microsoft\Non-Driver Signing" /f /t REG_BINARY /v "Policy" /d 00
reg.exe add "HKLM\Software\Policies\Microsoft\Windows NT\Driver Signing" /f /t REG_DWORD /v "BehaviorOnFailedVerify" /d 0x0

rem set driver signing policy
dsigning.exe

:: reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup" /f /t REG_DWORD /v "LogLevel" /d 0xFFFFffff

rem PNP USB devices and attach drive letter to USB flash drive
rem no RunDll32.exe Syssetup.dll,UpdatePnpDeviceDrivers
rem devcon.exe [url="http://support.microsoft.com/kb/311272"]http://support.microsoft.com/kb/311272[/url]
echo. &echo USB controller and USB HUB
for %%a in (PCI\CC_0C0300 PCI\CC_0C0310 PCI\CC_0C0320 USB\ROOT_HUB USB\ROOT_HUB20) do (
 devcon.exe hwids "%%a" | find.exe "%%a" && devcon.exe install %SystemRoot%\inf\usbport.inf "%%a"
)
echo. &echo USB storage device
rem no hwids defined for USB storage device
for %%a in (06 05 02 06 05 02) do (
  devcon.exe install %SystemRoot%\inf\usbstor.inf "USB\Class_08&SubClass_%%a&Prot_50"
)

rem USB keyboard and mouse
devcon.exe install %SystemRoot%\inf\usb.inf "USB\COMPOSITE"
devcon.exe install %SystemRoot%\inf\input.inf "USB\Class_03"
devcon.exe install %SystemRoot%\inf\msmouse.inf "HID_DEVICE_SYSTEM_MOUSE"
devcon.exe install %SystemRoot%\inf\keyboard.inf "HID_DEVICE_SYSTEM_KEYBOARD"

rem attach drive letter to USB hard disk 
rem ShowDrive [url="http://bbs.wuyou.com/viewthread.php?tid=116177"]http://bbs.wuyou.com/viewthread.php?tid=116177[/url]
ShowDrive.exe

rem view drives
MountVol.exe 

addional applications:
dsigning.exe, driversigning part of floppy image http://www.msfn.org/...howtopic=137714
devcon.exe http://support.microsoft.com/kb/311272
ShowDrive.exe http://bbs.wuyou.com....php?tid=116177

[Solivagus]

I am super happy to admit stupidity here ladies and gentlemen, the tool works fine for loading the Windows XP and Windows 7 install, I can even get BartPE/DOS to boot.

The problem is with BartPE/DOS I can't get any of the drives other than the ramdrive made and the usb stick to show, I am not really the sort to want to learn the entire documentation just to add a little functionality. I only need DOS for the odd firmware flash and the BartPE for the odd tool i.e. backup/file management if a drive got corrupted or whatever.

I assumed that all drives would show by default but i've tried fiddling with a few commands, looked through some forums/google but the commands I add still don't let me see ALL my drives.


I am obviously missing something REALLY simple here but I don't know what it is. The partition is NTFS, i've tried fat32. I load DOS as a loaded floppy image and BartPE just how it was installed with this tool.


tl;dr
How can I get BartPE/DOS to see all the drives on my computer?

[jaclaz]

Solivagus, on Jan 30 2010, 01:54 AM, said:

How can I get BartPE/DOS to see all the drives on my computer?

You go in BIOS and (if you have this setting availble) turn "AHCI" off or set "IDE compatibility mode" on (or some similar settings).

Most probably you have SATA disk drive(s) and you need to access them in "IDE compatibility mode" OR to add to the build the appropriate SATA drivers.

DOS, while being able to see the HD, won't however be able to access volumes in it formatted with the NTFS filesystem, unless you add to it a NTFS filesystem driver.

jaclaz

[Solivagus]

That makes BartPE work fine but DOS still doesn't see anything, is there any way to use the sata drivers in the windows xp/windows 7 sources to load for the DOS/BartPE so I don't have to fiddle with BIOS?

I don't need NTFS read/write to be honest but if anyone could quickly show me the menu.lst entries required to achieve this then my super usb will be complete. or any extra files that I may need to find

I've been looking through lots of posts/forums etc. but my brain be fried and it is just driving me bonkers

This post has been edited by Solivagus: 30 January 2010 - 06:47 PM