[abomadi]

Hi folks,
i bought an HP Pavilion 6880ee with windows vista based and this os killing me, i need to change it to xp sp3, i used nlite to integrate drivers for sata HDD but every time i burn cd i got different message like " The File iaStor.Sys was not found" or " IaStor.sys file is corrupted" i followed every step written on this forum to make new xp cd with sata enabled.

*Note: No Floppy Disk

please i need your help guys this vista sucks.

My laptop features: Intel Core Due2 2.20 t7500
4 GB
Currently OS : Vista Ultimate
Intel® 82801HEM/HBM SATA AHCI Controller
Intel® ICH8M Ultra ATA Storage Controllers - 2850



Txtsetup.sif
--------------------------------------

[SourceDisksFiles.x86]
iastor.cat = 1985,,,,,,,1985,0,0

iastor.inf = 1985,,,,,,,1985,0,0
iastor.inf = 1986,,,,,,,1986,0,0
iaStor.sys = 1,,,,,,4_,4,1,,,1,4


[HardwareIdsDatabase]
PCI\VEN_8086&DEV_2829&CC_0106 = "iaStor"

[SCSI.Load]
iaStor = iaStor.sys,4

[FileFlags]
iaStor.sys = 16
[SCSI]
iaStor = "Intel® 82801HEM/HBM SATA AHCI Controller (Mobile ICH8M-E/M)"



WINNT.SIF


; Generated by nLite 1.4.1

[Data]
Autopartition=0
MsDosInitiated=0
UnattendedInstall="Yes"

[Unattended]
UnattendMode=DefaultHide
UnattendSwitch="No"
OemPreinstall="Yes"
OemSkipEula="Yes"
FileSystem=*
WaitForReboot="No"
NoWaitAfterTextMode=1
NoWaitAfterGUIMode=1
DriverSigningPolicy=Ignore
NonDriverSigningPolicy=Ignore

[SystemRestore]

[GuiUnattended]
OemSkipWelcome=1

[Components]

[UserData]
ProductKey="V2C47-MK7JD-3R89F-D2KXW-VPK3J"

[RegionalSettings]
Language= "0409"

[Networking]
InstallDefaultComponents="Yes"




again guys your help is much appreciated, any solutions are welcomed

Cheers

Attached File(s)

•  WINNT.SIF (561bytes)
  Number of downloads: 1

[johnhc]

abomadi,
Are you using a VISTA system to make the XP ISO? If so, have you set nLite.exe to run in XP SP2 Compatibility Mode? Have you nLited the same source more than once? You should always start with a fresh copy of the CD files. What is your XP CD - retail, OEM, recovery, etc? You should attach (not paste) your LastSession.ini. Where did you get the SATA drivers? Did you integrate them as Text Mode? Are you using a virtual system (e.g., VirtualPC or VirtualBox to test? - highly recommended.
Enjoy, John