Drizzt_Kueh Posted October 16, 2008 Share Posted October 16, 2008 (edited) Hi, guys.As always, new set of updates from microsoft, new problems.But, this time, i'm not deleting the cat files.Here's the problem. I've sliptreamed (with hfslip v1.78) all the udpates corresponding to sp3 until today, but MU want to download the HF 956391. I've ran the hfnetchk. It indicates that the hf 956390 isn't installed too.I've downloaded ie7, and the mencionated HF again, but with no luck.I'm attaching the hfanswer.ini, the hfslip.log(both from the HFSLIP folder i've used), the newbin.txt (from HFSLIP_POST_getnewfiles_v3 plugin), and wu3.txt (from HFNETCHK).Any ideas? Thx.HFANSWER.INIHFSLIP.LOG.txtNEWBIN.TXTWU3.TXT Edited October 20, 2008 by Drizzt_Kueh Link to comment Share on other sites More sharing options...
cluberti Posted October 16, 2008 Share Posted October 16, 2008 This hotfix does not install any files, it just makes registry changes. However, it's branching information does seem to indicate that it does not check for any other hotfixes before installing.Are you sure that you have the same IE files in your %windir%\system32 and %windir%\system32\dllcache folders? For example, do you have 7.x versions (say mshtml.dll) in \system32 and 6.x versions in \system32\dllcache (or vice-versa). I've seen the (failed) integration of Internet Explorer 7 (and some IE hotfixes) cause all kinds of "missing hotfix' grief post-build. Link to comment Share on other sites More sharing options...
Drizzt_Kueh Posted October 17, 2008 Author Share Posted October 17, 2008 (edited) Hi, cluberti.About wich hotfix are you talking? Both?I'm having problems with the hotfixes 956390 (HFNETCHK indicates that's not installed) and 956391 (Microsoft Update indicates that's not installed).The versions of mshtml in the system32 and system32\dllcache folders are the same.Edit 1:HF 956391I've solved adding a .reg file in the hfsvcpack, with the following content:Windows Registry Editor Version 5.00[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{0002E510-0000-0000-C000-000000000046}]"Compatibility Flags"=dword:00000400Thx to redxii (http://www.msfn.org/board/index.php?showto...st&p=804276)Waiting any ideas about the hf 956390 problem.Edit 2:I've tried to install the 956390 manually on the installed windows, finalize ok. But when i've ran the hfnetchk appear the same error.I'm the only one with this problem? Edited October 20, 2008 by Drizzt_Kueh Link to comment Share on other sites More sharing options...
P0TER Posted October 24, 2008 Share Posted October 24, 2008 Yes same problem, no solution so far. MU not want to update anything, so is it a big problem? It complains the mshtml.dll has a version which is HIGHER, so not much harm in that. Except for the shdocvw.dll which has a lower version it seems.Patch NOT Installed MS08-058 956390 File C:\WINDOWS\system32\mshtml.dll has a file version [7.0.6000.20900] that is greater than what is expected [6.0.2900.5659]. - File C:\WINDOWS\system32\shdocvw.dll has a file version [6.0.2900.5512] that is less than what is expected [6.0.2900.5659]. Hope anyone can help too! Link to comment Share on other sites More sharing options...
cluberti Posted October 24, 2008 Share Posted October 24, 2008 Yes same problem, no solution so far. MU not want to update anything, so is it a big problem? It complains the mshtml.dll has a version which is HIGHER, so not much harm in that. Except for the shdocvw.dll which has a lower version it seems.Patch NOT Installed MS08-058 956390 File C:\WINDOWS\system32\mshtml.dll has a file version [7.0.6000.20900] that is greater than what is expected [6.0.2900.5659]. - File C:\WINDOWS\system32\shdocvw.dll has a file version [6.0.2900.5512] that is less than what is expected [6.0.2900.5659]. Hope anyone can help too!It's saying that shdocvw.dll doesn't have the file version (5659) required to meet the installation of 956390 (it installs shdocvw .5659). However, it also finds that mshtml.dll is newer than the version in the hotfix - you should start to find out why mshtml.dll is 20900 (the QFE version from 956390), but shdocvw.dll is not 5659. Something during the build process is either replacing shdocvw.dll with the SP3 RTM version (.5512), or the update when integrated isn't updating all of the requisite files. Link to comment Share on other sites More sharing options...
P0TER Posted October 25, 2008 Share Posted October 25, 2008 Well, you are explaining my question I guess, but I already tried to find out why the versions are different and where the replacement error takes place, but i can't find it, hence the question.Also, if the 20900 is according the update, then why it is complaining of a too high version? Link to comment Share on other sites More sharing options...
cluberti Posted October 25, 2008 Share Posted October 25, 2008 Well, you are explaining my question I guess, but I already tried to find out why the versions are different and where the replacement error takes place, but i can't find it, hence the question.Also, if the 20900 is according the update, then why it is complaining of a too high version?Because this is a QFE version, and this is a symptom of HFSLIP (the decision to install QFE binaries over GDR). Normally, on a regular build of Windows, you would have GDR binaries which are of a lower build number (you can see it if you look at the files updated by the hotfix on the Microsoft site, if you'd like). It's not an error, it's just stating that the binary is higher than the GDR version. I see you're not removing CAT files either, so may I suggest you try a new build, but using hfslip to install IE7 during GUILogon, and then a logon script to install IE7 hotfixes afterwards? Technically installing or slipstreaming IE7 and cumulative updates isn't supported by Microsoft precisely because the setup engine can cause breakage (like this) because you're laying IE7 down, and then immediately trying to update it's files which can cause mismatched .dll versions and failures to upgrade certain binaries, so I'm wondering if this is happening to you. Link to comment Share on other sites More sharing options...
Geej Posted October 25, 2008 Share Posted October 25, 2008 I do not have Kb956390 problem, only kb956391. From the tips given via registry tweak, it fixed kb956391 prompt by Microsoft update.I observe in your HFANSWER.INI, there is no answer setting for IE7 slipsteaming. I had it set IE7SVCPACK=1Perhaps you want to try this option? Link to comment Share on other sites More sharing options...
Drizzt_Kueh Posted October 28, 2008 Author Share Posted October 28, 2008 Geej, i've tried with that switch, but the problem remains.Can you post your hfslip.log? Thank you! Link to comment Share on other sites More sharing options...
Geej Posted October 29, 2008 Share Posted October 29, 2008 Geej, i've tried with that switch, but the problem remains.Can you post your hfslip.log? Thank you!here. hope that helps Link to comment Share on other sites More sharing options...
seedofonan Posted November 7, 2008 Share Posted November 7, 2008 I'm struggling with the same problem with KB956390 from:http://www.microsoft.com.nsatc.net/downloa...;displaylang=enI've attached its log file. What I've found is that when I let WU run normally after XP x64 has finished installing, WU downloads a totally different set of files than are contained in the one above. What few dlls they do have in common are completely different versions. Specifically, all the SP2QFE/GDR dll versions from above are 6.3.3790.4357 built 2008/08/20 versus the latter 7.0.6000.16735 built 2008/10/04.I'm going to try taking the latter version from SoftwareDistribution\Download and make a self-extracting exe to run during install. But what gives? I'd much rather use a MS download. Anyone know where I can get the right KB956390 for xp x64? Link to comment Share on other sites More sharing options...
James_A Posted November 7, 2008 Share Posted November 7, 2008 (edited) Is there any reason why the link shown in the last post should be pointing to Savvis Communications (nsatc.net) rather than the expected/usual link to microsoft.com ??. Edited November 7, 2008 by James_A Link to comment Share on other sites More sharing options...
Drizzt_Kueh Posted November 7, 2008 Author Share Posted November 7, 2008 I tried to install a clean XP SP3 VM, and then install all the updates available.After that, i ran HFNETCHK, in that VM. It shows me the same error.Why?, i ran the hfnetchk in several machines and i obtained the 956390 error in all of them.Maybe a language problem (i'm using the spanish version of WinXP)? Or a problem with the HFNETCHK tool?Can you, people, run the hfnetchk tool in your machines, and look if the hf 956390 is correctly installed? http://hfslip.org/support.htmlThank you. Link to comment Share on other sites More sharing options...
Geej Posted November 8, 2008 Share Posted November 8, 2008 Can you, people, run the hfnetchk tool in your machines, and look if the hf 956390 is correctly installed? http://hfslip.org/support.htmlThank you.Found the following msg generated by WU1.txt * WINDOWS XP SP3 Patch NOT Installed MS08-058 956390 File C:\WINDOWS\system32\mshtml.dll has a file version [7.0.6000.20900] that is greater than what is expected [6.0.2900.5659]. - File C:\WINDOWS\system32\shdocvw.dll has a file version [6.0.2900.3264] that is less than what is expected [6.0.2900.5659].KB956390 does not contain shdocvw.dll. It only has mshtml.dllHmm... Window updates never complains about missing kb956390... so I'm leaving it as it is Link to comment Share on other sites More sharing options...
Drizzt_Kueh Posted November 8, 2008 Author Share Posted November 8, 2008 I'm starting to believe that the error is a false positive. Maybe is a problem with the HFNETCHK tool.Anyone run the hfnetchk without errors? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now