[konenas]

I recently installed a sound card on my Windows 2000 box, but something went wrong and I have the above message.
I've checked this file from Windows 200 server (D:) and it's ok, but nevertheless I copied on it another from my iso backup.
Also, I checked boot.ini which is ok, too.

Is there a chance to have drive letters wrong after installation?

My disk installation is C: (old NT partition), G: (This W2k), D: (Windows 2000 server)

I haven't got any rescue diskettes, but I have a system state backup just before the installation.
Can I recover it?

thanks.

[Tripredacus]

You usually get this message, not because the ntoskrnl.exe is missing but likely one of its dependencies got removed, moved, corrupted or was updated by a third party. In other words, ntoskrnl needs other files to load, but if they are missing or aren't correct, it can't. Then when the next step in Windows load process looks for ntoskrnl and it isn't running, it says that it is missing.

If you are lucky, yes you can replace the ntoskrnl using the one on the Windows CD. You may have to make use of the EXPAND program, and either use NTFSDOS or the Recovery Console. Also, if you happen to be on a network, you may be able to replace the file that way, but only until you change its attributes. I believe those would be -R +A -S -H. But you would have to reverse that after replacing the file, so +R -A +S +H.

[konenas]

@Tripredacus
I've already replaced it, but the error still occurs.

[Hedonist]

"I recently installed a sound card on my Windows 2000 box"

Have you tried removing the sound card and rebooting?

[Tripredacus]

Hedonist, on Nov 14 2008, 03:25 AM, said:

"I recently installed a sound card on my Windows 2000 box"

Have you tried removing the sound card and rebooting?

The error he is getting is software related. Removing the soundcard wouldn't likely fix the issue. If anything, removing the soundcard software or driver package would be more helpful. I don't have the operational experience with Windows 2000 to tell you how to even attempt that, however.

[Hedonist]

Tripredacus, on Nov 14 2008, 10:00 AM, said:

Hedonist, on Nov 14 2008, 03:25 AM, said:

"I recently installed a sound card on my Windows 2000 box"

Have you tried removing the sound card and rebooting?

The error he is getting is software related. Removing the soundcard wouldn't likely fix the issue. If anything, removing the soundcard software or driver package would be more helpful. I don't have the operational experience with Windows 2000 to tell you how to even attempt that, however.

Well, my understanding is that if the hardware is removed then NTDETECT.COM will not detect it during the boot sequence therefore the software/driver would not be loaded and, perhaps, the software conflict would not arise. However, I have been wrong before now and I hope to live long enough to be wrong again.

Edit: Already proved myself to be wrong, the device should be uninstalled in Device Manager before being removed. This article http://www.windowsnetworking.com/kbase/Win...andDevices.html explains it.

Apologies for jumping in at the deep end...

This post has been edited by Hedonist: 14 November 2008 - 08:39 PM

[konenas]

How can I remove something, when I can't boot Windows any more?

This post has been edited by konenas: 15 November 2008 - 01:56 AM

[Hedonist]

Appreciate that. Most of the "cures" require the use of an install cd which I think you indicated you don't have (?). I still think you could try removing the sound card and rebooting. Meantime here's Computer Hope on the subject http://www.computerh...es/ch000646.htm and a list of others who have had the same problem here http://www.google.co.nz/search?hl=en&q...earch&meta=