anthonyaudi Posted November 20, 2008 Share Posted November 20, 2008 Guys I don't know if I'm in the right forum but I am trying to deploy a remote installationI get an error during the remote install saying insufficient memory to load dmboot.sys please press any key to continue and then the machine rebootsI am trying to do this with a HP 6730b machine. Does anyone know what this problem can be it only happens with this particular machine I have 4 machines and all 4 do the same thing.I presumed it was because the drive was in ACHI so I changed it to IDE and it still does not work.Anyone ever have this problem or know what I can do to fix it.Thanks! Link to comment Share on other sites More sharing options...
HighDarkTemplar Posted December 6, 2008 Share Posted December 6, 2008 I'm no expert but the first things that hits my mind is drivers (SATA-drivers, even if you run them in IDE-mode, maybe some specific drivers for that motherboard? etc etc) and the other one is defect hardware. You can try the Ultimate Boot CD to test your hardware....Good luck!-Nerevar Link to comment Share on other sites More sharing options...
derniwi Posted December 8, 2008 Share Posted December 8, 2008 Hi,can you install your HP from CD without a problem?Did you load the setup defaults in the BIOS and have you checked you have the latest BIOS?Regards, Nils. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now