[loopb]

TXTSETUP.SIF

[SourceDisksFiles]
nvgts.sys = 1,,,,,,3_,4,1
[HardwareIdsDatabase]
PCI\VEN_10DE&DEV_07F4 = "nvgts"
PCI\VEN_10DE&DEV_07F5 = "nvgts"
PCI\VEN_10DE&DEV_07F6 = "nvgts"
PCI\VEN_10DE&DEV_07F7 = "nvgts"
[SCSI.load]
nvgts = nvgts.sys,4
[SCSI]
nvgts = "NVIDIA nForce Serial ATA Controller (AHCI mode)"



[SourceDisksFiles]
nvrd32.sys = 1,,,,,,3_,4,1
[HardwareIdsDatabase]
SCSI\VEN_10DE&DEV_07F8 = "nvrd32"
SCSI\VEN_10DE&DEV_07F9 = "nvrd32"
SCSI\VEN_10DE&DEV_07FA = "nvrd32"
SCSI\VEN_10DE&DEV_07FB = "nvrd32"
SCSI\NVIDIA__Raid_Disk________ = "nvrd32"
SCSI\__NVIDIA_______Raid_Disk = "nvrd32"
SCSI\NVIDIA__Raid_Disk_20_____ = "nvrd32"
SCSI\__NVIDIA____Raid_Disk_20 = "nvrd32"
*_NVRAIDBUS = "nvrd32"
*NVRAIDBUS = "nvrd32"
*NVRAID20 = "nvrd32"
[SCSI.load]
nvrd32 = nvrd32.sys,4
[SCSI]
nvrd32 = "NVIDIA nForce Serial ATA Controller (RAID mode)"



[SourceDisksFiles]
nvgts.sys = 1,,,,,,3_,4,1
[HardwareIdsDatabase]
PCI\VEN_10DE&DEV_07F0 = "ide"
[SCSI.load]
ide = nvgts.sys,4
[SCSI]
ide = "NVIDIA nForce Serial ATA Controller (IDE mode)"



[SourceDisksFiles]
nvgts.sys = 1,,,,,,3_,4,1
[HardwareIdsDatabase]
PCI\VEN_10DE&DEV_056C = "pata"
[SCSI.load]
pata = nvgts.sys,4
[SCSI]
pata = "NVIDIA nForce Serial ATA Controller (PATA mode)"


WINNT.SIF

OemPnPDriversPath="NFORCE\SATARAID; NFORCE\SATAIDE"

It will be good? I hav the AHCI mode in BIOS selected ad in my Windows XP SP3 EN shows a SCSI driver and HDD (name) N0 drive. Is it good?