studio48 Posted December 9, 2008 Share Posted December 9, 2008 (edited) Hi all..I created a lite version of the Windows 7 build 6956 and tought that it would work like a charm just as the windows 7 Lite build 6801 ..but i was wrong.I tried several ways spilled about 5 dvd's and waisted at least 12 hours on thsis (Silly) project i,m on but still i want to know what i,m doing wrong and if its impossiblenow to get parts out of this build.Maybe some of you guys could tell me what went wrong.Everything goes good..it boots installs well after selecting the drive etc it starts to copy ..then jumps to the next process and then at 100% i get this error"windows could not apply unattend settings during pass (offlineservicing)"Help is needed here from experts..]Hope to hear from you smart guys here..i will post my preset files aswel.Thanks in advance..Best regards Puck Edited December 9, 2008 by studio48 Link to comment Share on other sites More sharing options...
studio48 Posted December 9, 2008 Author Share Posted December 9, 2008 Here is my last preset fileLast_Session.ini Link to comment Share on other sites More sharing options...
pedrohsi Posted December 9, 2008 Share Posted December 9, 2008 i could install it only if i didn't touch the Unattended settings - any changes in there returned the same error during install Link to comment Share on other sites More sharing options...
Lucaz Posted December 9, 2008 Share Posted December 9, 2008 (edited) I got exactly the same problem all the time, no matter if i use vlite or not.Can anyone please help me out here since i cannot find anything about this problem whatsoever Edited December 9, 2008 by Lucaz Link to comment Share on other sites More sharing options...
Chrno Posted December 9, 2008 Share Posted December 9, 2008 Browsing this section of the forum for about 5 minutes tells you about a thread that have the info about for example: removing manual install, system restore, hibernation and trying to fiddle with the unattended mode that comes with vlite will not make this install possible or even boot.I might be wrong about system restore and hibernation, but manual install and unattended mode is out of the question. Link to comment Share on other sites More sharing options...
HaZe303 Posted December 10, 2008 Share Posted December 10, 2008 Browsing this section of the forum for about 5 minutes tells you about a thread that have the info about for example: removing manual install, system restore, hibernation and trying to fiddle with the unattended mode that comes with vlite will not make this install possible or even boot.I might be wrong about system restore and hibernation, but manual install and unattended mode is out of the question.Yes, and to OP, dont waste DVD disc in vain, just use Virtual PC or VMWare to test youre image´s before you burn them. Perfect for the occasion! Link to comment Share on other sites More sharing options...
studio48 Posted December 11, 2008 Author Share Posted December 11, 2008 (edited) Ok Guys my final repport is here..I could edit the iso with vlite but that would result in the error you see above in the picture that user posted..thank you thats the error i get aswel when i edit the win7 build 6956 with Vlite.Now i have 2 test pc's one is a tower i build a dual AMD 4600 with 1 gig memory.The other is a Compaq EPC Evo d512 with 2500mhz pentium processor. and 512mb ramVlite helped me in some way read what happendIn the compaq i had no DVD drive so i tought to be smart and selected in vlite only to create a bootable iso splitted in 5 cd'sBecause i was tired of the waisting of disck i burned only disk 1 of 5.and booted..let me give you some more history on this case.I have a usb dvd drive i can connect to the compaq and normaly i always install the OS this way but now when i inserted the full dvd of WIn7 build 6956 i get error code 5 at boot..cannot boot code 5-The same Dvd however booted without a problem on my second test pc the AMD dual 4600mhz and installed fine.I was like what the hell is the code 5 i get and booted with the disk 1 of 5 created with vlite and it booted just fine in the compaq.Ready to go an burn Disk 2 of 5 and i get a error insert correct disk bla bla and then it went back to the menu that say's Do you want to install Win7 ?THe same menu you get if you insert the dvd from Windows -When i saw that i concluded that i need a dvd drive for the compaq and pulled out 1 out of my old laptop.Inserted it and tought oke..now i can boot directly from the dvd cause the disk 1 is spoiled aswel.Booted the compaq with the dvd i get this error again..code 5 cannot boot.So i removed the dvd and inserted the cd 1 of 5 and booted till i get the error again and then it went back to the part..do you want to install win7.At that point i inserted the DVD (full) and clicked install.All went good and Win 7 installed without a problem and now thecompaq runs the 6956 --without this trick i cant see how i otherwise should have done it..so Vlite helped me in some way !Thats all for now folks..Thank you for testing !Regards Puck Edited December 11, 2008 by studio48 Link to comment Share on other sites More sharing options...
redxii Posted December 11, 2008 Share Posted December 11, 2008 Might be best to wait for '7lite'. Link to comment Share on other sites More sharing options...
oskingen Posted December 11, 2008 Share Posted December 11, 2008 Let me check your unattended file. Link to comment Share on other sites More sharing options...
studio48 Posted December 11, 2008 Author Share Posted December 11, 2008 Let me check your unattended file. HEre it is ..Thanks !Last_Session_u.ini Link to comment Share on other sites More sharing options...
studio48 Posted December 11, 2008 Author Share Posted December 11, 2008 Might be best to wait for '7lite'.Yea then we have Nlite Vlite nd 7lite yehaaa!!!! Link to comment Share on other sites More sharing options...
FarCry3r Posted December 15, 2008 Share Posted December 15, 2008 (edited) I was referring to the wrong person. LOL! Sorry. Anyway, never ever burn the ISO unless you're satisfied with the result... Edited December 15, 2008 by FarCry3r Link to comment Share on other sites More sharing options...
studio48 Posted December 15, 2008 Author Share Posted December 15, 2008 (edited) I was wondering, why won't hannubys listen to what other suggest and try the modified 6956 on a virtual machine first before actually burning the CD(s) out?Ofcourse we did that first ..I,,m wondering what your reply can help to solve this problem .Wondering what point Mr Knowitall wants to make here. Edited December 15, 2008 by studio48 Link to comment Share on other sites More sharing options...
LeveL Posted December 29, 2008 Share Posted December 29, 2008 We will have to wait until Microsoft provide a WAIK for this version of Windows.We can't "guess" what needs to go in that Autounattend.xml file but thats what we would be doing, just guessing. Link to comment Share on other sites More sharing options...
aviv00 Posted December 29, 2008 Share Posted December 29, 2008 use dism or wait for new waik Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now